Used Eccentric Chuck for sale (4,696)

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Bsdpetqwtdofx Aaljdi Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: like new (used), functionality: fully functional, Kitagawa B-210 3-jaw chuck as new Bjdpsxl Dmvsfx Aaledi Shipping by parcel service is possible if costs are covered.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Bsdpfxexd Uq Aj Aalodi -Manufacturer: VEB, three-jaw chuck chuck size Ø 110 mm -Type: DH 110x3 -Passage: Ø 25 mm -Bolt circle: Ø 134 mm -Dimensions: Ø170 x 155 mm -Weight: 9.2 kg

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Bdedpfx Aew Tukisalsi Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Condition: like new (used), functionality: fully functional, three-jaw chuck diameter: 400 mm, Hydraulic 3-jaw chuck from the Italian manufacturer SMW, model Autoblok 400BH. Bsdexq Amxspfx Aalodi The set includes the parts shown in the photos: chuck, clamps, screws, and hard jaws.

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Bdodpexnldzofx Aalsi

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck Bjdpfx Aoxd Upfoalodi -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Bdodpfxeuqdwxe Aalei Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: good (used), quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert -Quick-change chuck holders: 18 pieces, without: arbor -2x sleeve: MK1 -7x sleeve: MK2 Bsdpfx Aowa Invealsdi -6x sleeve: MK3 -3x sleeve: MK4 -Mounting: Ø 42 mm -Price/Delivery: complete -Transport dimensions: 300/200/H170 mm -Complete weight: 21 kg

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Bdodpfxeuqcxnj Aalji Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK50 x 22 x 400 Bdsdpovmxvxjfx Aalei -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm -Weight: 5.9 kg

Condition: used, Year of construction: 1979, machine/vehicle number: 4941, Capacity: 75 ton Throat depth: 300 mm Ram stroke: 8 - 100 mm Slide adjustment: 60 mm Shut height (stroke down, adjustment up): 390 mm Table surface area : 700 x 600 mm Slide area: 400 x 270 mm Number of strokes: 120 s.p.m. Required power: 4 kW Dimensions L x W x H: mm Weight of machine approx.: 3,5 ton Extended machine accessories Dreher roller feed model WAV-MD-2Z /1060 K-AMaterial width 210 mmMaterial thickness max. 1.5 mmMax. feeding speed 80 m/min. Bdodpjw Tukvsfx Aalei

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Bdjdpfx Aed R Exhoaloi -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Bsdpfx Aouqc Enoaljdi Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck Bedoxdxb Eopfx Aaledi -Manufacturer: Bahmüller, thread cutting chuck with keyless chuck -Type: 18.6012 - Bahmüller SK40x36 A 125 -Chuck: Albrecht 1/8-5/8" / 3-16 mm -Dimensions: Ø 63 x 350 mm -Weight: 4.4 kg

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Bdjdpfxouqc Hfe Aalji Extended machine accessories Press body can be tilt

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment, two-jaw thread cutting chuck Bdjdpfx Aajxdw Svelsi -Manufacturer:Röhm, two-jaw tapping chuck MK3 -Type: MK3 B24 -Tool holder: square up to 24 mm see photos -Dimensions: Ø 85 x 245 mm -Weight: 4.4 kg

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, thread cutting attachment -Tapping chuck: Tapping attachment -Recording: MK3 -Bore: Ø 13 mm Bedpfsxdwrpsx Aaljdi -Dimensions: Ø 72 x 210 mm -Weight: 2.3 kg

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, thread cutting attachment -Tapping chuck: 2 tapping attachments Bdjdpfx Aaoxdwq Solei -Recording: MK4 -Bore: 1x Ø37 mm / 1x Ø22 mm -Shipping/Price: complete -Transport dimensions: 230/125/H335 mm -Total weight: 16.9 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder Bdedpfx Aaoxdk Absloi -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder Bdodpfx Asvcxhgoalsi -Milling holder: SK50 holder -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 m -Weight: 23.5 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 Bjdpfxjxdkmyj Aaledi -Chuck size: Ø 400 mm -Bolt circle: Ø 235 mm -Adapter: Short taper 11 / cone 192 - 196 mm -Through hole: 111 mm -Dimensions: Ø 400 x 325 mm -Total weight: 138 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Bsdpfoxdh I Iox Aalodi -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 160 mm -Hole: Short cone 4, cone Ø 60 - 63 mm -Bolt circle: Ø 85 mm -Dimensions: Ø 160 x 70 mm -Weight: 2.6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 225 mm Bjdpfoxdhvlex Aalsdi -Mounting: cone Ø100-102 mm -Bolt circle: Ø 140 mm -Dimensions: Ø 225 x 165 mm -Weight: 8.1 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Bdedpsxdhu Isfx Aalji -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg