Used Eccentric Chuck for sale (4,834)

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm Kodpfsvzxnwex Aalsdi ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation as is where is, WITHOUT any additional work, free loaded to truck Kdodpfx Aovut Hhealji

Condition: used, Year of construction: 1995, pressure 063 t Kdjdpfx Asvut Ewoalsi throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, input voltage: 380 V, input frequency: 50 Hz, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Maximum tube length: Kedpfxjw I In Ro Aalsdi

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Kdjdexlh Rfjpfx Aalsi Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: excellent (used), Three-jaw chuck from Röhm Diameter 315 mm (28593) stock number Kedpfx Aovxz T Roaljdi max. n1 min/2000 equipped with hard base jaws and screwed-on soft jaws. Weight 42 kg

Condition: excellent (used), Four-jaw chuck Arowa No.8 (28592) Diameter 250 mm Through hole 68 mm Kjdpfovx Acysx Aalsdi Weight 20 kg

Condition: like new (used), functionality: fully functional, chuck outer diameter: 800 mm, three-jaw chuck diameter: 800 mm, 3-jaw chuck self-centering chuck, diameter 800 mm in excellent visual and technical condition, price 6.000 EUR Kdjdpfx Aoyr Ipisaloi

Condition: used, Year of construction: 2000, ram adjustment: 120 mm, table width: 840 mm, table length: 1,500 mm, pressing force: 260 t, compressed air connection: 9.807 bar, stroke length: 250 mm, air pressure: 9.807 bar, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us. Kdodpoykbcmefx Aalei

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Kdjdpfx Aaevy Dutslsi

Condition: used, Year of construction: 1979, Pressure 063 t Kdjdpfsylck Ujx Aalei throat 400 mm stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 1000 x 750 mm hole in the table 260 x 140 mm table height over floor 710 mm ram surface 600 x 220 mm ram adjustment 50 mm weight 4,3 t dimensions (WxDxH) 1,1 x 2,6 x 2,4 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: ready for operation (used), Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible. Kjdpjyq R Edsfx Aalodi

Year of construction: 1973, condition: ready for operation (used), A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible. Kdsdeyq R D Tjpfx Aalsi

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm Kdsdpoygh Unefx Aalsi -Weight: 23.5 kg

Condition: good (used), Year of construction: 1980, In good technical condition. Kjdpfx Aoytb Dpsaledi Year of manufacture: 1980

Condition: good (used), Stock number: 2829 Manufacturer: Eisenwerk Hensel Bayreuth - EBU Kodpfxox Uwb Ie Aaledi Machine number: P5044070 Type: SK 25 Press force: 25 t Table: 595 x 410 mm Ram: 170 x 150 mm Passage hole: 210 x 170 mm Throat depth: 200 mm Strokes per minute: 150 Stroke: 4 to 80 mm Ram height adjustment: 70 mm Table adjustment: 240 mm Condition: good Connection: 1.5 HP (1.1 kW) Weight: 1.5 t Dimensions: 800 x 1,300 x 2,000 mm

Condition: used, Year of construction: 1971, operating hours: 24,808 h, functionality: limited functionality, total height: 1,915 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 1,150 kg, DGUV certified until: 07/2026, pressing force: 35 t, power: 1.47 kW (2.00 HP), Tool monitoring: CamCon DC50/51 Nominal force: 350 kN Stroke rate: max 110 Feed: mechanical Adjustable stroke: 8-100 mm Main drive // kW: 1.1 kW Power connection: 2.85A/380V 50 Hz Adjustable stroke: 8 - 100 mm Table size: 400x380 mm Max. strip width: 20 mm Max. material thickness: 1 mm Kedpjyvfcbsfx Aalsdi Machine dimensions: 1030 x 790 x 1915 mm Weight: 1150 kg "Main drive on (actual operating hours)": 24,808 hrs

Year of construction: 1977, condition: ready for operation (used), An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible. Kdsdoypr Spopfx Aaloi

Condition: used, New precision lathe chuck, precision chuck 3-jaw high precision power chuck High Precision Air Chuck KITAGAWA KPC63C100 EP 3-jaw pneumatic precision chuck with integrated cylinder Chuck No. L1208 - P - EP Year of manufacture: 2011 External diameter: 150 mm Kjdpfx Aasyif I Islodi External clamping range: approx. 3-135 mm Internal clamping range: approx. 6-149 mm Jaw stroke: Ø 2.5 mm Max. clamping force: 11.6 kN Repeatability: 0.0010 mm Jaw mounting bolts: M5 x 16 mm, 4 units per jaw Chuck mounting bolts: 6 units, M6 x 65 mm Max. speed: 4000 rpm - Unused, packed in original box - Box only opened for photos Weight (chuck): 6.3 kg Weight with box: 8.5 kg New, unused, as-new from stock Suitable for DMG WASINO G series and many Japanese lathes

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, We are selling 11 hydraulic Schunk power clamps, type KSH 250. Although the clamps are from 2002, they are virtually as new. They still have the original protective coating and have always been stored dry in a warehouse. All 11 units are unused. Sufficient clamping inserts are included for a clamping range of Ø34 to Ø62. Of course, inserts can be tailored to meet your specific requirements. Ksdpoyt I Dcsfx Aalodi

Condition: used, diameter 250 mm Kdjdpfjicbq Nox Aaloi

Condition: used, diameter 315 mm weight 36 kg ID 105 mm Kdedpforc I H Nox Aalsi

Condition: used, diameter 200-400 mm different adapting flanges available. Price per pc. Kjdpfxju Sbgbs Aalsdi

Condition: used, tool clamping area 200x55x195 mm weight 0,01 t Kdjdpogqg Rusfx Aalei - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ----

Condition: used, tool clamping area 300x55x85 mm weight 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- Kdodpfjgqlkgsx Aaloi