Hydraulic power chucks

SMW Autoblok DFR-ABS-210

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: Nwsdpfjrz Nfljx Agnjc - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 Njdpfx Aofg E Hljgnewc band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm Nwedevy Ihdepfx Agnec tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) Nwjdpfx Asu Aa I Ssgnsc with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: excellent (used), Year of construction: 2006, 70 linear meters Pallet Racking SSI Schäfer Palflex incl. Mesh Decks Used, good condition, see photos Year of manufacture: 2006 Height: 4 m Depth: 120 cm Bay load: 12,000 kg Galvanized frames Red beams Mesh decks included! 2 mesh decks per 2.7 m beam length Negotiable price: €8,290 net ex stock The offer includes: + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1,500 kg load capacity per level (evenly distributed load) + 200 safety clips + 100 galvanized mesh decks for 50 levels, each with a 2.7 m beam length + 104 concrete anchors + Load signs Goods in stock. Transport and installation available on request. Inspection by appointment at any time. Further information on request. Always over 5,000 linear meters of pallet racking from various manufacturers in stock. (Changes and errors in technical data, specifications and prices as well as prior sale reserved! See our T&Cs, all prices excl. VAT ex stock) Purchase / Sale We are continuously looking for and offering a wide range of items from various sectors clean-sweep business clearances company liquidations Nwodpfokx E I Nex Agnsc fast - flexible - efficient! We also clear out or dispose of assets for administrators. Send us a few keywords – we will contact you promptly. To access our site, please click on our logo!

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Year: 2003 Distance Between Centres: 2000mm Nedpfx Agewmqkyonswc Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Fixed Steady

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Nwjdjq Rcu Eopfx Agnjc Table with vacuum plate with BORNEMANN 960 suction unit

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW Njdpfxjk Hdu De Agnowc weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Nsdpfx Agoifi D Tonswc Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: like new (used), Year of construction: 2017, operating hours: 5,190 h, functionality: fully functional, MAIN SPINDLE MAX. BAR DIAMETER: 70 MM MAX. TURNING DIAMETER: 290 MM MAX. TURNING LENGTH: 560 MM SPINDLE NOSE: A2-6 SPINDLE POWER: 11 KW SPINDLE SPEED: 40-4000 RPM C AXIS: 360° INCR. INDEXING 0.001° TURRET NUMBER OF POSITIONS: 12 NUMBER OF LIVE POSITIONS: 12 AXES: X=170 MM, Z=560 MM, Y=+55/-50 MM SUB-SPINDLE Njdpfx Agowurdwonswc SPINDLE NOSE: A2-5 SPINDLE POWER: 11 KW SPINDLE SPEED: 5000 RPM C AXIS: 360° INCR. INDEXING 0.001° CONTROL FANUC 32i-B