Used Dust Extractor for sale (4,231)

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device Nsdsib Dadspfx Agwjwd of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: used, Year of construction: 2009, Fabricant : WAM Modem ATEX : FPXHTD12VA1498 Year : 2009 Type: Atex horizontal dust filters ATEX: ExII3D135°C(T4) Suction fan: 2.2 kW Separation type: Filter sleeves Filtration surface area: 12 m² Purging solenoid valve Nsdpfex R D Hiex Agwjwd   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: used, Year of construction: 1999, Paint booth extraction system Attention: The supply air unit does not have a heating coil, only a fresh and recirculated air damper. Self-dismantling Price: 3500.- Location: 1230 VIENNA Nwodpfx Agjyvkwfewjd

Condition: used, With bottom extraction attachment Extraction surface (W x H): 2400 x 1600 mm Airflow: 7000 m³/h Height: 2600 mm Depth: 800 mm Complete air supply system included (Wolf KG100 type) Nodpfxjyxm Ekj Agwswd With drip tray Comes with control system

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Nodpork Itcjfx Agwewd Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Nedpfx Agotq Ufvewjwd High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: ready for operation (used), Heavy duty cyclone extractor 11kw fan , automatic retarder , fine dust filter Nwsdpjx N Hrfofx Agwod

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Model: Filter-master XL Fan power: 1.5 kW Nwsdpfxsymkq So Agwsd Airflow: 1000 m3/h Vacuum: 3000 Pa Cartridge filter element. Stock no.: 1110

Condition: used, This listing is for 1 of 2 Horizon SPE-DEX 4790 Extractor SPE-DEX 4790 is the only extractor system ever designed to handle both clean and particulate laden environmental samples such as: Ground water Waste water Drinking water Solid-waste water Process water (influent and effluent) Fresh and sea water The SPE-DEX 4790 Extraction System features: Bench-top operation freeing up valuable hood space Modularity for up to (8) extractors to be connected simultaneously to one PC Interchangeable 47 mm and 90 mm SPE disk holders Automatic sample bottle rinse (3)different solvents 5-Conditioning solvents Nedpfjxzhtlsx Agwewd Prewritten validated methods included Uses original sample bottle

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 7.5 kW DCO-7500-N Overview A dust collector is a part of a ventilation system. It is designed to remove suspended particles. This task is fulfilled with a fan rotor and replaceable filter canisters. Using a dust collector improves air quality, making it easier to keep the connected machine clean, and extending its life. Dust collectors are safe for operators and the environment. Nodsium Ipspfx Agwowd Specifications - Input voltage: 400V AC 50hz - Efficiency: 3000-4000 m3 - Nominal power: 7,5kw - Filtration area: 40 m2 - Number of filters: 4 units - Filter size: ⌀325 mm - Filter height: 660 mm - Weight: 400 kg - Height: 1980 mm - Width: 1000 mm - Depth: 1000 mm

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h Nwedpfx Aovhcnzegwod - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h Nwsdpfx Asyn Rkusgwod * 84 dBA * 2800 L/min

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms mobile on rollers Nedpoivta Nofx Agwjwd 2 pieces available Very good condition ready for use!!!

Condition: excellent (used), Extraction dust removal Nedermann type 663 Nwodpfsiyyxcjx Agwed with 2 suction arms Very good condition, directly from production!!!

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm Nwsdpfjt Rbhzsx Agwjd -Weight: 9.2 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system Nwjdpfxeryalis Agwjd -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -for: paint wall, paint booth -Motor: Explosion-proof -Engine power: 5.0 kW -Speed: 1455 rpm Nwedeca Iarjpfx Agwod -Inlet connection: Ø 430 mm -Outlet connection: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm Nodpfxerp Ii Uo Agwswd -Weight: 100 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower Nsdpfx Ajca D Edogwswd -Motor power: 0.6 kW -Speed: 2800 rpm -Volume flow rate: m³/h -Pressure: Pa -Inlet connection: Ø 150 mm -Output connection: 150 x 110 mm -Impeller: Ø 260 mm -Number: 1x fan available Price: per piece -Dimensions: 450/400/H390 mm -Weight: 19 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm -Max. volume flow: m³/h -Max. pressure: Pa Nwsdpedz Umpjfx Agwod -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm Nodpodz Umrofx Agwowd -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg

Condition: good (used), Year of construction: 2001, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Nsdpovnaabofx Agwjwd -Dust extraction fan: radial fan -Motor: VEM 3,6 kW 1430 U/min Ex protected -Fan wheel: Ø 580 x 180 mm -Connection: inlet Ø 395 mm -Connection: Output 280 x 485 mm -Dimensions: 825/670/H825 mm -Weight: 118 kg

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, Nedpspxq Ugofx Agwewd -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Nodpfx Aget Rbhuewjwd -Dust extraction fan: Radial fan type DN 160 -Motor: Dietz 1.0 kW 2850 rpm -Volume flow: 30 m³/min / 1800 m³/h -Connection: inlet Ø 140 mm -Connection: Output 135 x 135 mm -Dimensions: 470/300/H365 mm -Weight: 17.7 kg

Condition: used, Year of construction: 2008, Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm Njdpofrpnwefx Agwewd -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg