Used Duble Column for sale (4,765)

Condition: used, this listing is for Cytiva Axichrom 100/500 chromatography column the unit is in full working condition and ready for immediate use This pilot-scale column features automated axial compression for repeatable bioprocessing and downstream purification. Transparency report and technical audit: Nodpfx Aozqf E Rskiolh Software and media disclosure: as a direct-from-lab asset, any original software media or accessories found with the unit are included as a courtesy. licensing notice: we do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for procurement: This unit is sold as-is. while we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. ideal for labs with in-house technical expertise or existing service agreements. Sustainability impact: By choosing direct reuse, your facility avoids the carbon footprint of new manufacturing

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm Nsdpfxsz N Hu Ne Akislh hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph Nlsdpfx Ajyfhtnskijh

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release Nedpfx Akez A R Iroijlh - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic HEAD Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Nljdsz Ib Elepfx Akieh Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding - Chip conveyor - Operation and maintenance manuals - CE certification

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. KEY TECHNICAL DATA Nlsdpfxjzz H Emo Akish Machine year of manufacture: 2012 Capacities / Travel: Longitudinal (X): mm 8,000 Vertical (Y): mm 2,600 Lateral (Z): mm 1,500 Table size: Length: mm 10,000 Width: mm 2,500 Distance between grooves: mm 250 Paint finish: RAL 5011 (steel blue) RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Drive power: 100% ED 32 kW Spindle speed: min-1 20-4,000 Torque: Nm 900 Max. rapid traverse speed: X, Y and Z axes mm/min 25,000 Weight: kg approx. 34,200 Heidenhain iTNC530 Automatic milling head, diagonal, stepless Tool changer (60 magazine slots) Chip conveyor Coolant system 20 bar & internal coolant Preparation for NC rotary table RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a rigorous selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, position of the milling head: 360 x 1° en 180 x 1°, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 9,000 mm, total height: 4,900 mm, total length: 16,200 mm, table length: 5,500 mm, table width: 2,600 mm, table load: 10,000 kg, coolant supply: 16 bar, workpiece weight (max.): 10,000 kg, grinding spindle motor power: 30,000 W, feed length W-axis: 1,000 mm, SHW Powerspeed 5 with Heidenhain iTNC530, including: • X-8,000 mm, Y-2,100 mm, Z-1,300 mm • W-1,000 mm with C-axis, with 1600 x 1600 mm (suitable for a 10T table load) • Fixed clamping table with T-slots 22 mm, 5,500 x 2,600 mm • Orthogonal machining head SK50, max. 6,000 rpm, 360 x 1° and 180 x 1° • Power P = 30 kW at 100% ED / 41 kW at 40% ED. • Tool holder SK50 according to DIN 69871/72-AD • Heidenhain measuring scales in X, Y and Z axes • Chip conveyor in articulated belt design for X-8,000 mm • External and internal coolant supply with paper band filter and 1,000L clean water tank. High-pressure pump 16 bar • Air cooling along and through the spindle • Tool magazine with 48 positions SK50 (max. Ø125 mm, max 400 mm length, max. 25 kg) Nlsdpfxezz Hkpo Akieh • Shuttle machining capability with a fixed position for the removable partition • Dimensions L x W x H = 16.2 m x 9 m x 4.9 m (from the normal floor) • Electrical connection 400V / 50 Hz / 3Ph, 65 kVA and 3 x 95A slow-blow fuse

Condition: used, This listing is for Amersham BPG Chromatography Column 100/500 The unit is in full working condition and ready for immediate use. This lab-scale column offers high-performance fluid dynamics and scalable design, making it ideal for robust downstream processing and reliable chromatographic separations in professional laboratory environments. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Nsdpfxozqf Dmj Akislh Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: used, This listing is for Pharmacia Biotech BPG 140/500 Chromatography Column The unit is in full working condition and ready for immediate use The BPG 140/500 is a robust preparative chromatography column designed for laboratory and bioprocess purification applications. The 140 mm diameter and 500 mm column dimensions provide a substantial separation bed, with an approximate geometric volume of 7.7 litres. Suitable for protein and biomolecule purification using a range of chromatography media. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: Nodpfjzqf Dtox Akijlh We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2001, pressure 200 t table surface area 1600 x 1300 mm ram stroke 600 mm dayligth 900 mm die cushion capacity 80 t die cushion stroke 150 mm die cushion area 1200 x 750 mm distance between columns 1650 mm table height over floor 1060 mm ram surface 1600 x 1300 mm oil volume 1400 l height over floor 3500 mm rapid drop speed 400 mm/sec drawing speed 42 (80 to) mm/sec drawing speed 20 (200 to) mm/sec return speed 325 mm/sec Control Siemens total power requirement 75 kW weight of the machine ca. 20 t Nsdpoz St Izofx Akielh Machine is with cushion in table (80 t), light guards and Siemens control for presses.

Condition: used, Alzmetall AC 32 Turret Double-Head Drilling Machine An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units. This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes. Technical specifications & equipment (per head / total system): Nlsdpfx Aeznic Uskijh Manufacturer of drilling head units: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2x pivoting turrets with multiple stations Machine table: Solid, ground cast iron table with T-slots for flexible setup Safety: Complete enclosure of the work area (protective cabin) with viewing windows for optimal chip and splash protection Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, This listing is for Cytiva Axichrom 70/500 Chromatography Column The unit is in full working condition and ready for immediate use Nljdpfx Aezqf E Dskish This low-pressure chromatography column features an automated packing design, ensuring optimal bed stability and reproducible purification runs for pilot and production-scale bioprocessing workflows. [ Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production Nsdpfx Akexhdwyeijlh 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Nlodpfez Dunljx Akieh Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control Nedjzix Rwepfx Akislh - Electronic handwheel - Operator platform - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm - Splash guard enclosure - CE marking

Condition: used, HANS Type: GSX 500-3.98 HANS column-slewing crane / column-swivel crane Load capacity: 500 kg / reach: 3,050 mm For sale: a HANS column-slewing crane with a LIFTKET electric chain hoist for industrial, workshop, production, assembly, and maintenance applications. The crane is suitable for operational lifting tasks and can be used to lift, position, and move workpieces, components, and machine parts. Technical data according to the nameplate Manufacturer: HANS-Hebetechnik + Metallbau GmbH Type / Designation: GSX 500-3.98 Year of manufacture: 2011 Design: Column-slewing crane Load capacity: 500 kg Reach: 3,050 mm Self-weight according to the crane nameplate: 360 kg Electric chain hoist LIFTKET Manufacturer: HOFFMANN Fördertechnik GmbH / LIFTKET Type: 021/51 Year of manufacture: 2011 Load capacity: 250 / 500 kg Lifting speed: 8.0 / 2.0 or 4.0 / 1.0 m/min Chain dimensions: 4 × 12 mm Power connection: 380–415 V / 3 phases / 50 Hz Control type: Direct control Protection class: IP55 Equipment / Features HANS floor-mounted column with slewing arm LIFTKET electric chain hoist Electric trolley Load hook Hand control / control pendant Chain catch container Crane main switch on the column Floor mounting via base plate Industrial design Condition & Notes Condition: used Visual condition: see pictures Signs of wear and tear due to use Functional testing not documented Scope of supply Nsdpfx As Aaxbzskielh HANS column-slewing crane GSX 500-3.98 LIFTKET electric chain hoist Hand control Scope of supply as per sales agreement and pictures Dimensions & Weight Reach: 3,050 mm Load capacity: 500 kg Self-weight according to the crane nameplate: 360 kg Overall height and transport dimensions: not determined Total weight including accessories: not determined The actual transport dimensions and total weight depend on the scope of supply and the dismantling condition. Shipping or freight transport is possible by arrangement. Dismantling and loading must be coordinated in advance. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Nlsdpfx Akoz Ear Ssish Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: AGH634, 1x Mobile column-mounted slewing crane, mobile gantry crane Type WK1 - Year of manufacture 2014 Load capacity at full reach: 250 kg / 0.25 tonnes Overall height: approx. 3.7 m, Reach: approx. 3 m Hook height: approx. 3.2 m, Lower edge of boom: 3.5 m Nlodpfjzy D D Rjx Akioh Base size: approx. 110 x 110 cm Column with counterweight incl. ABUS 250 kg chain hoist, cable carrier and accessories Total weight: approx. 3350 kg Connection to 400 V, Slewing range: 270° Very good condition, fully functional Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold. See pictures Shipping via freight forwarder or collection

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 140/500 The unit is in full working condition and is ready for immediate use AxiChrom is a family of large-scale, low-pressure chromatography columns made by GE Healthcare The “140/500” refers to a column with inner diameter (ID) 140 mm and bed height up to 500 mm (the “long-tube” version Typical Uses Nsdpfx Aksxhdw Teijlh Process development, scale‑up trials, and small/full scale production of biomolecules (e.g. proteins, antibodies) in biopharma or biotech. As part of purification workflows where large volumes and high throughput are needed, but still under low pressure (i.e. not high‑pressure liquid chromatography)

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Nedpfoz Dtw Sox Akislh Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nedsz Izcwepfx Akijlh Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic unit Control panel

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, operating hours: 1 h, overall weight: 280 kg, BOMA SB 32 V - Pillar drilling machine -CE marking -Exhibition machine / Unused -Spindle speeds / Stepless 50 - 2100 rpm -Stepless speed control -Threading device up to M16 -Morse taper MK 3 -Spindle stroke 135mm -Overhang 250mm -Work table size 415x375mm -Work table rotatable 360 degrees -Distance spindle - table approx. 850mm -Distance spindle - base plate approx. 1190mm Nsdpfx Akozyz Uaeiolh -Column diameter 100mm -Safety device for drilling quill -Drill chuck -Documentation Dimensions: L x W x H 0.7 x 0.9 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: used, This listing is for the GE Healthcare (now Cytiva) GE Axicrom 50/300 Chromatography column The unit is in full working condition and is ready for immediate use Nljdpjxhdxdjfx Akieh The AxiChrom line is a series of chromatography columns by GE Healthcare (now Cytiva), designed for preparative / process chromatography scale. The “50/300” refers to the diameter and tube length / “bed height” configuration. Key details: 50/300: This is the smallest of the larger-scale columns. The “50” refers to the internal diameter (ID) of the column tube (50 mm), and “300” refers to the bed height (300 mm) for the “short” version. There is also a “50/500” for longer bed heights (500 mm). It uses axial compression, meaning the packing medium is compressed hydraulically from the top adapter, which helps ensure uniform packing density. The materials are designed to meet regulatory standards (USP Class VI, etc.

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm Nsdpfsxu Dwmox Akielh total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, This listing is for GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. Njdjxxycaspfx Akiolh The unit is in full working condition and ready for immediate use. Automated biopharmaceutical column packing system optimizing resin performance for purification