Used Drill Sharpener for sale (5,369)

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Nsdpfx Ajudpc Ssa Eslk

Condition: used, Year of construction: 1999, According to our "General Terms and Conditions of Sale and Delivery," and without any guarantee or warranty, we can offer you the following vehicle today on a non-binding basis until the conclusion of the sale. Subject to errors, misprints, and prior sale: Väderstad Rapid RD 600 P Seed Drill Nljdexzw R Tspfx Aa Ejk Year of manufacture: approx. 1999 Approx. 10,000 hectares ID No. 917 Pneumatic seed drill Row spacing: 15 cm PTO drive Control terminal Pneumatic seed drill Fan driven via PTO Pre-emergence marker Tine harrow Performance monitor Hydraulic folding Good condition Price: €9,000.00 (net) All information is provided without any guarantee or warranty. Our General Terms and Conditions of Sale and Delivery apply. The place of jurisdiction for both parties up to a disputed amount of €50,000.00 is the Local Court of Ludwigslust. For disputed amounts exceeding this, the District Court of Schwerin has jurisdiction. Subject to errors, misprints, and prior sale.

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: Njdpfx Aaoif Az Us Eolk 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Year of construction: 1997, condition: used, machine/vehicle number: 0201-200066, Used Peddinghaus DSC300 DRILL drilling system for CNC-controlled drilling of sectional steel with roller measuring device for length measurement and profile positioning. The Peddinghaus DSC 300 drilling system is a small CNC-controlled drilling system with 3 drilling axes and a roller measuring system for length measurement and material transport. Nlodpfxst Udb Eo Aa Eok

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2501001, type of input current: AC, Drill Bit Grinding Machine 0313 – Simple Drill Bit Sharpening for Everyone Achieve perfect results quickly and easily, even without professional training! It’s so easy! Sharpening your drill bit is completed in three steps: 1. Clamp the drill bit in the fixture 2. Grind the drill bit 3. Point/sharpen the drill bit tip Ready in less than a minute! Before clamping the drill bit, use the rotary knob on the grinding machine to set the required drill diameter. With the appropriate collet, the drill bit is positioned against the stop in the left holder of the machine and clamped in place. Sharpening the cutting edges and pointing the tip is straightforward: power on the machine, insert the fixture with the drill into the right holder, and turn gently from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to grind the second cutting edge. Pointing the tip works the same way, using the top holder. That’s it – simply switch off the machine and unclamp the drill bit. A brilliant design combines an eccentric mechanism with a specially engineered grinding wheel, so there’s no need to worry about edge profile or clearance angle. Additionally, both cutting edges are produced with exactly the same setting, guaranteeing perfect edge symmetry. The tip angle can also be freely selected between 90° and 140° before grinding. 21 highly precise collets for diameters from 3 to 13 mm in 0.5 mm increments ensure truly concentric clamping. The service life of the grinding wheel exceeds 5,000 applications. Besides the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drills. Changing the wheel takes just a few moments and two safety switches prevent unintended start-up when the machine is open. The compact design and practical carrying handle make this drill bit grinding machine ideal for mobile use. All system tools, such as collets, fixtures or hex wrenches, are stored on the machine itself—so everything you need is always at hand. The drill bit grinding machines are energy efficient and even fit on any desk. Nlsdpexnzrnjfx Aa Ejk Drill bit sharpening without prior knowledge – clean, fast and reliable! Included: - 11 collets for whole millimeter sizes (3 – 13 mm) - 10 collets for half-millimeter sizes (3.5 – 12.5 mm) - Standard CBN grinding wheel - Machine dimensions: 290 x 200 x 180 mm - Shipping weight: 12 kg

Condition: excellent (used), Drill heads - special gears for Nottmeyer etc. Various drill heads Nodpfxsgrkmvj Aa Eslk

Condition: like new (used), Year of construction: 2024, Technical specifications: Filtration flow rate: approximately 90 l/min Fluid compatibility: neat, mineral, or synthetic oil; aqueous fluid (emulsion or synthetic) Pollutants: Carbide, Cermet, PCD, HSS, Precious Metals, Cast Iron, Ferrous and Copper Alloys, Aluminum, Ceramic, Plastic Filtration threshold: 5-10 μm nominal depending on the cartridges used Dimensions: 1,000 x 1,090 x 1,545 h Advantages: Reduced surface area Plug & Play solution Easy access for maintenance Nodpfx Aajwahrhs Eolk No compressed air required Filtration and temperature stabilization on 1 m² of surface area Suitable for all machines requiring no more than 100 l/min of coolant

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Paper drilling machine Citoborma 490 ST (with sliding table) Hang p/n: 713-0295/108 611 Nagel p/n: 1854060 05/2019 Nlsdex Iruvopfx Aa Esk (see photo)

Condition: used, AUTOMATIC SHARPENING MACHINE FOR TCT SAW BLADES, UP TO 800MM DIAMETER Nljdpfex E Npxsx Aa Eok

Condition: good (used), functionality: fully functional, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, total height: 1,850 mm, total width: 940 mm, This Bimak Mod. 35 MT/C is a well-maintained column drilling machine equipped with a cross table and features a Mitutoyo digital readout on two axes. The machine supports both clockwise and counterclockwise rotation, which can be easily switched using a foot pedal for efficient operation. The Laip quick-change system includes ten tool holders, consisting of two drill chucks and seven collet holders, providing flexibility for various drilling and tapping tasks. An additional collet holder is required for milling operations with this machine. This holder is not included but can still be ordered as new. Manufacturer: Bimak Model: Mod. 35 mt/c Condition: Used Mains voltage: 400V Drive: V-belt Spindle taper: MC4 Spindle stroke: 150 mm Automatic spindle feed: No Speed ranges: 14 (45 - 1650 rpm) Digital readout: Mitutoyo Coolant pump: Yes Reversible (CW/CCW): Yes Cross table dimensions: 600 x 240 mm Machine dimensions: 940 x 1100 x 1850 mm (Width x Depth x Height) Nlodpfx Asxt Ivksa Eok Motor: 0.8 / 1.5 kW See website for a video of the machine in operation.

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Nledjw Syyyjpfx Aa Eek

Condition: reconditioned (used), Year of construction: 1980, Rapid radial drilling machine DONAU DR 23 Year of manufacture: 1980 Nlodpfsxuh Rkox Aa Eek Speed range: 70 rpm – 1550 rpm Arm reach: 920 mm Drilling capacity in steel: 30 mm Thread cutting device Mechanical feed Clamping table surface: 1050 mm x 400 mm Spindle taper: Morse taper 3 Machine lamp Coolant device Rotary table Ø 250 mm with index plates Machine vice 160 mm 5 height-adjustable machine shoes Various tools

Condition: ready for operation (used), Flott TB 13 ST Drilling Machine / Bench Drill - Clamping table: 225 x 295 mm - Spindle mount: with drill chuck - Throat depth: 185 mm - Speeds: 400-5000 rpm - Column: Diameter 60 mm - Spindle stroke: 60 mm, depth stroke with fine adjustment - Motor power: 0.5 kW - Dimensions: 380 mm x 225 mm x 745 mm (L x W x H) - Weight: 50 kg You are welcome to arrange a viewing. We are happy to arrange low-cost shipping for you! Nedpfx Asxzbylsa Eolk You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. Stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: good (used), Hang 117-01 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. Each head is independently adjustable, which allows the use of drills of different lengths. Drill table adjustable in every plane, with a lock. Nljdpfxevac Hhe Aa Ejk The spacing of the heads is adjustable with a crank. Waste directed to an external container. Two operating speeds: 950 and 1900 rpm Technical data: number of drilling heads: 2 diameter of lights: 3-10mm stack height: 60mm drill spacing min: 45mm / max 160mm table dimensions: 780x430mm Weight: 100kg Power supply 380V The machine has documentation, maintenance tools, drills, and a new column

Condition: used, Year of construction: 1995, ISELI AS 2 is a saw blade sharpening machine designed for precision, high accuracy, and reliability. Capacity: blades Ø 250–1200 mm; tooth pitch 15–100 mm/tooth; tooth height 40 mm; blade bore 22–210 mm; clamping angle 0–30°; grinding angle 0–15°. Specifications: grinding wheel Ø 200/250 mm, max. thickness 16 mm, wheel bore 25 mm; feed rates in 4 steps. Njdpfjx E Npfsx Aa Eolk

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC-controlled circular saw blade sharpening machine VOLLMER CHC840 Sharpening of all tooth geometries with 4 CNC axes Capacity up to 840 mm Operates with full oil bath Machine in perfect working condition Delivery and training available Nedpfx Aasxw Uuno Eslk

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm Nljdpfoxm Rziex Aa Esk -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: excellent (used), The DNDA type pointer–chamfering machine is designed for forming conical points or chamfering the ends of shafts, rods, and stakes. Feeding and rotation of the workpiece are performed manually. Min. length of workpieces: 700 mm Disc rotational speed: 1060 rpm Number of cutting knives: 6 pcs Motor: 4 kW Extractor nozzle diameter: Ø 160 mm Required air flow for chip extraction: 850 m3/h Table height above floor: 730 mm Overall dimensions: Length: 960 mm, Width: 880 mm, Height: 1300 mm Nedpfx Aaox E Eh Rs Eelk Weight: 280 kg

Condition: ready for operation (used), Tool grinder, tool sharpener, drill sharpener, Schanbacher S3-50 Manufacturer: Schanbacher Type: S3-50 Year: 2012 Dimensions: 460 × 600 × 1260 mm Nljdpjx Dbltofx Aa Eok Drill diameter: 3–50 mm; Point angle: 90°–140° Includes: Protective cover, dust extraction system

Condition: good (used), HANG 114-00/4 paper drill The device is in very good condition. This is the latest product of the hang brand. The highest class of machines among drilling machines.. Waste directed to an external container. Controlled by an electric foot switch. Each head is independently adjustable, which allows the use of drills of different lengths. Nljdjt N R Nrjpfx Aa Eok Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm drill spacing max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools and drills.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 Nedsir E Snepfx Aa Ejlk -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Condition: good (used), Hang 114-00/4 Paper Drill Device in very good condition. The highest class of machines among drills. This is the currently produced model. The drill table is adjustable in every plane. Waste is directed to an external container. Controlled by an electric foot switch. Each of the heads has independent adjustment, which allows the use of drills of different lengths. Technical data: number of drill heads: 4 drill diameter: 3-10mm stack height: 65mm min drill spacing: 36mm / max260mm drill speed: 1500 rpm two table lifting speeds table dimensions: 600x480mm Power supply: 400V Nljdswq Dwbjpfx Aa Eek Weight: 400kg The machine has documentation, operating tools, drills.

Condition: good (used), Durselen Corta PB-01 STE Automatic paper drill The device is in very good condition, ready to work. This is one of the newest Durselen models, the most advanced model. Nodpfju Ul Hnsx Aa Eslk Production Germany. 6 drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system and lubrication. A programmer for controlling the table that allows you to approach programmed distances. Smooth regulation of spindle speeds and smooth regulation of the speed of lowering the heads. Waste disposal compressor Sliding column system on a tape. Technical data: Drill diameter: 2-10 mm, Stack height: 60 mm, weight: 400 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Solid construction on a pedestal. Waste is directed to the external pocket. The set includes operating tools, instructions, drills and sharpener.

Condition: good (used), Durselen PB 16A four-head paper drill The device is in perfect condition, like new! This is the newest one. currently produced model. Nodsu A Rr Iepfx Aa Ejlk Production Germany. Four drilling heads with adjustable spacing. The machine has a pneumatic drill cooling system. Sliding work table. Automatic column system – a belt that is moved to the next position when worn out Technical data: Drill diameter: 2-16 mm, Stack height: 50 mm, weight: 300 kg Power supply 380V Automatic drilling cycle, controlled by a foot pedal. Smooth regulation of spindle speed and lowering speed of heads on inverters. Solid construction on a pedestal. Waste is directed to the built-in bin Drill table adjustable in every plane, front and side margins. The set includes operating tools and drills.

Condition: good (used), Nagel Citoborma 280B Paper Drill The device is 100% functional. This is one of the newest models. The drill table is adjustable in every plane (sides, front/back). It has limiters for setting the drilling spacing. The installed table is in an enlarged version. Additionally, the paper drill has an automatic table lock, which is released after each cycle. Super condition. Solid construction – weight 76kg. 380V power supply Njdexwtu Hepfx Aa Eelk Two drilling heads, with adjustable spacing within the range of 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been inspected The set includes drills and tools, a new cutting stick, and an instruction manual.