Used Drawers for sale (899)

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, cruise control, differential lock, traction control, Permissible total weight: 18,000 kg, Seats: Fabric, Interior color: Anthracite, Electronic Braking System (EBS), Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Stationary air conditioning, LED headlights, Leather steering wheel, Power steering, Electric windows, Sunroof, Immobilizer, Central locking, All-season tires, Digital exterior mirrors, XG cab, Adaptive Cruise Control with FCW and AEBS-3, Lane Change Warning System. Front axle: 8.00 t, Parabolic spring, 163N RR, not applicable. Emission class: Euro 6 OBD-E, Engine: H6, Fuel: B7, Automated transmission, TraXon, 12 gears, Wheelbase: 4.00 m, Rear overhang: 0.99 m, Standard component arrangement: PACCAR Connect, 10-year subscription, Warranty Plus, Drivetrain, 3 years, 500,000 km. Chassis configuration: Front: Aero base plate, Cab: Air-suspended, Sun visor (exterior), LED headlights and fog lights, LED skylights, Additional LED lights on the cab roof, Pre-wiring for two LED headlights on the rear of the cab, All-round lights on the front of the cab, Pre-wiring, Windshield with sun protection film, Laminated glass with sun protection film, No front mirror, DAF Corner View, Central locking, 3 keys, 2 remote controls, Side deflectors, Extended, Both sides foldable, Side skirts with extension on the upper and lower sides, Lower cab step: Crystal White, Steering wheel: Leather, Cab: Interior trim: Argenta, Driver's seat: Luxury Air, Armrests on both sides of the driver's seat, Driver's seat with swivel base, Passenger seat: Comfort Air, Armrests on both sides of the passenger seat, Storage compartment with drawer in the center console, Refrigerator and drawer, Preparation for air compressor, Xtra Comfort mattress + topper, Lower bunk, Upper bunk, Curtains with separating curtain, LED interior lighting: Luxury, Automatic cab climate control, Stationary air conditioning, integrated, Sunroof with electric operation, Accessory power supply: Standard + 2x 40 A, ECAS remote control with extended functions, FMS connector, extended and pre-wired, DAF Truck Navigation. Gbsdpfx Aij Agxh Ujksw

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, color: other, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, traction control, Permissible total weight: 18,000 kg, seats: fabric, interior color: anthracite, 1 x airbag, lift axle, intarder, tachograph, electronic braking system EBS, electronic stability program ESP, anti-slip regulation ASR, auxiliary air conditioning, driver's seat with air suspension, LED headlights, radio, audio interface, leather steering wheel, power steering, electric windows, immobilizer, central locking, sun visor, cooler box, digital exterior mirrors, XG cab, adaptive cruise control with FCW and AEBS-3 lane change warning system. Front axle: 8.00 t, parabolic, 163N Goodyear R1,315/70R22.5GO EQMDU 154/150 L Traction ABB 3P RR, not applicable. Emission class: Euro 6 OBD-E. Engine: H6, fuel: B7, automated transmission, TraXon, 12 gears. Wheelbase: 4.00 m, rear overhang: 0.99 m. Standard component arrangement. Chassis: front: Aero floor panel, cab with air suspension, external sun visor, LED headlights, cornering and fog lights, chrome grille/trim on front, side: darkened windows, windshield with sun protection film, laminated glass with sun protection film, main mirror, convex main mirror, no front mirror, no digital vision system DAF Corner View 1. Central locking, 3 keys, 2 remote controls. Side skirts with extension on the upper/lower side. Lower cab step: Crystal White. Cab housing: black for Crystal White cab, interior trim: Argenta. Driver's seat: Luxury Air, armrests on both sides of the driver's seat, driver's seat with swivel base. Co-driver's seat: Cinema, fabric cover, armrests on both sides of the co-driver's seat, storage compartment with drawer in the center console, refrigerator and drawer, preparation for air compressor. Xtra Comfort mattress, adjustable lower bunk, upper bunk, curtains with separating curtain, LED interior lighting: luxury, automatic cab climate control, auxiliary air conditioning, integrated, roof hatch with electric operation. Accessory power supply: standard + 2x 40 A FMS connector, extended and prepared. PACCAR Conne Gjde Agxh Ropfx Aikjbw

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up Gbedpfsw Ip Dgex Aikjw CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: used, Year of construction: 1992, functionality: fully functional, fuel type: electric, – German-made – Year of manufacture: 1992 TECHNICAL PARAMETERS: - Feed opening: 600 x 800 mm - Rotor diameter: 175 mm Gjdpfx Aow Iqbyoikjbw - Rotor length: 600 mm - Total power: 18.5 kW - Number of knives: 14 pcs - Rotating crown cutting knives: 30 x 30 mm - Screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC DRAWER - Height of pressure drawer: 180 mm - Rotor speed: 80–120 rpm - Extraction connection diameter: Ø 200 mm - Dimensions (L/W/H): 200 x 120 x 120 cm - Weight: 1200 kg

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring Godpfx Aijzb Rbtekjbw spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit Gbsded Iin Hopfx Aikjw · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: used, mileage: 225,700 km, power: 382 kW (519.37 HP), first registration: 09/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Fifth wheel coupling: Saddle height 970 mm + 1,140 mm. * Lowliner ----New tachograph 4.1 installed. ----* Connectivity Board module (Rio Box) * Additional cab insulation * MAN EasyStart (hill start assist) * MAN EVBec (= Exhaust Valve Brake, electronically controlled) * MAN Media System Advanced Navigation, 7 inches * Infotainment control MAN SmartSelect * MAN Advanced sound system with subwoofer * Front axle with air suspension * Differential lock, rear axle * Drive slip control (ASR) * Rear axle with air suspension * Anti-lock braking system (ABS) * Emergency braking assistant (EBA) * Retarder * Electronic stability program (ESP) * Disc brakes * Full brake assist * Driver attention alert MAN AttentionGuard * Sliding/lifting sunroof, glass version * Auxiliary air conditioning, electric * Battery main switch * Lane departure warning system (LDW) * Exterior sun visor, transparent * Electrically adjustable and heated exterior mirrors * Air horns, cab roof * Roof and side spoilers on the cab * Cab GX - the maximum (wide, long, extra high) * Cab mounting with air suspension * Central locking with remote control * Immobilizer (transponder) * Automatic transmission * Transmission function MAN Idle Speed Driving * Transmission MAN TipMatic 14 27 DD with retarder * Automatic climate control * Auxiliary water heater * Heated driver's seat * Fuel tank 480 liters * AdBlue tank 80 liters * Fuel tank 480 liters * Fog lights * Headlight cleaning system * Engine version Euro 6, E * Driver's seat with air suspension * Cornering light Gjdpfozy S D Ssx Aikjbw * High beam assistant * Lower bunk * Upper bunk * Adaptive cruise control (ACC) with stop-and-go function * Driver comfort package * Electric front windshield roller blind * Refrigerator in drawer under the bed * EBS * Without spare wheel ----For sale only to commercial businesses! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will gladly provide you with a leasing or financing offer.

Condition: used, mileage: 29,300 km, power: 235 kW (319.51 HP), first registration: 03/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,590 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, Tail lift Dhollandia 2,000 kg, 1,800 mm, can be driven under. * Cooling unit Thermo King T-1000R, diesel + 400 V, cold chain recorder. ----Refrigerated box Schmitz. ATP/FRC + Pharma certificate (GDP). ----* Connectivity Board Module (Rio Box) * Transmission: 12-speed automatic * Tail lift, can be driven under * Box with rear doors and tail lift * MAN EasyStart (hill start assist) * MAN EVBec (= Exhaust Valve Brake, electronically controlled) * MAN Media System Advanced Navigation 7 inches * Infotainment control MAN SmartSelect * Front axle with air suspension * Differential lock, rear axle * Traction control system (ASR) * Rear axle with air suspension * Anti-lock braking system (ABS) Godpoz S R Ewsfx Aikebw * Emergency braking assistant (EBA) * Electronic stability program (ESP) * Disc brake * Full braking assistant * Driver attention alert MAN AttentionGuard * Battery main switch * Lane departure warning (LDW) * Cab L (long) * Roof hatch in the cab * External sun visor, transparent * Exterior mirrors, electrically adjustable and heated * Cab TM - the comfortable one (narrow, long, medium height) * Central locking with remote control * Immobilizer (transponder) * Transmission function MAN Idle Speed Driving * Transmission MAN TipMatic 12 12 OD * Auxiliary air conditioning (roof-mounted) * Automatic climate control * Hot water auxiliary heater * Heater for passenger seat * Heater for driver's seat * Rear view camera * Tank 220 liters * Tank 220 liters * Engine version Euro 6, E * Cruise control * Video turning assistant system (VAS) with display * Engine version with AdBlue * Load securing certified according to DIN EN 12642 Code XL * Driver's seat with air suspension * Passenger seat with air suspension * Lower bunk * Upper bunk * Load securing rails * Rear doors * Refrigerator in drawer under bed * EBS * Without spare wheel ----For sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will be happy to provide you with a leasing or financing offer.

Condition: used, mileage: 801,735 km, power: 324 kW (440.52 HP), first registration: 12/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Technical Data * Engine: D2676LF26, 440 hp / 324 kW, EURO 6 SCR, 2100 Nm * Transmission: MAN TipMatic® 12 21 DD with retarder * Wheelbase: 3600 mm * Gross Vehicle Weight: 18,000 kg (technically up to 20,500 kg) * Fuel tank: 580 l diesel + 60 l AdBlue ----Cab & Comfort Cab: XLX high-roof, 2440 mm wide * Comfort seat with air suspension, lumbar support, shoulder adjustment & heating * Air conditioning with automatic temperature control * Auxiliary heater (EBERSPÄCHER D4S) Gjdex S Dfuepfx Aikjbw * 2 sleeping berths with mattresses and storage space * Cooler box, folding table, drawers * Ambient lighting, electric windows, sun visors ----Safety & Assistance Systems ABS, ASR, ESP * Emergency Brake Assist (EBA1) * Lane Guard System III (lane keeping assistant) * Adaptive Cruise Control (ACC) * MAN BrakeMatic (electronic braking system) ----Additional Equipment MAN Media Truck Advanced with Bluetooth & hands-free function * Digital tachograph & CB radio * Aerodynamic package with roof spoiler and side deflectors * Disc brakes front & rear * 2-circuit hydraulic system * Fifth wheel coupling JOST JSK 42 ----* Tire dimension front axle: 385/55 R22.5 * Tire dimension rear axle: 315/70 R22.5 * Fuel tank: 490 + 520 liters * AdBlue tank: 80 liters * Technically permissible gross weight: 20,500 kg * Unladen weight: 7575 kg * Permissible fifth wheel load: 26,470 kg * Overall length: 6000 mm * Wheelbase: 3600 mm -----Internal vehicle number: 11578----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. We can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export handling * Arranging financing * Application for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: new, turning length 1000 mm turning diameter 360 mm swing diameter over bed slide 220 mm turning dia. in gap 502 mm spindle bore 52,0 mm turning speeds 70 - 2.000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 3 MK quill travel 100 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 575 kg. range L-W-H 1825 x 750 x 1600 mm Scope of delivery - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 280 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard Gbodexaaz Ejpfx Aiksw - Base frame with drawers - Operating tools

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm Gjdpfxjxabzyj Aikjbw capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: new, range L-W-H 1066 x 460 x 940 mm weight 80 kg 12 St. Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg Gbjdsupxu Ajpfx Aikjw

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t dimensions 2,4 x 1,2 x 0,95 m Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165mm Gsdpfxsu Aw Sbo Aikjbw Bottom ribbed for reinforcement. Incl. floor bearing Accessories optional!! Surface evenness 0.2 - 0.4mm over 1000mm. - with drawer unit - Grid shelf - Heavy-duty castors steerable Welding accessories shown not included!!!

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan Gbjdpfx Aiskm Rynokew ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Gjdopbvqvopfx Aiksbw Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful Gbedpofg E H Usfx Aikow and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,26 t dimensions 1,2 x 0,8 x 0,85 m Gedpfxjgazm De Aikobw Special offer !!! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice)

Condition: new, range L-W-H 2300 x510 x 1500 mm weight 145 kg 20 St. Equipped with 4 high-performance castors, two with brakes. Heavy duty wheels 150 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. One lock for the door and 1 lock for all drawers. Solid wood panel 4 cm thick. Solid ball bearing guides (double bearings) for the drawers 10 drawers 12 storage boxes Gedpeu Imddsfx Aikjbw 13 hooks.

Condition: new, range L-W-H 1360x500x1970 mm weight 115 kg 7 St. weight max. in kg 700 kg Professional workbench / tool trolley Dimensions of the upper drawers 1240 x 400 x 100mm. Middle drawer dimensions 770 x 400 x 60mm. Cabinet dimensions 500 x 420 x 540mm Dimensions of the tool wall 1050 x 610mm. Dimensions of the wall cupboards 2 pcs. 680 x 280 x 350mm. 4 rolls of 125 x 50 mm each. 4 x hanging storage containers of 10.5 x 14 x 7.5 cm. 3 x hanging storage containers of 14 x 22 x 12 cm. 2 x steel containers of 33 x 10 x 10 cm. 2 x U-hooks 55 x 25 x 6 mm. for tool wall. 4 x double hooks 85 x 6 mm for tool wall. Gedpfsu Imfnex Aikobw 2 x universal hanging frame 37 cm. Wide. 2 x hanging racks for socket wrenches.

Condition: new, range L-W-H 780 x 480 x 1050 mm weight 79,5 kg 6 St. The tool trolley is equipped with 6 storage drawers. The tool trolley is equipped with 2 normal and 2 swivel wheels, Gbjdpju Imk Rofx Aikew one of them with a brake. The tool trolley is fully lockable thanks to an integrated lock. Drawers can be locked per drawer. All drawers are equipped with a quick release and a cushioning fitted. Height-adjustable storage compartment behind the door. Central locking with 2 keys. Tool trolley is equipped with 155 pieces of tool parts: 3 pcs. Socket sets: 1/4 ", 3/8", 1/2 ". Ratchet ring spanner set from 6 - 22mm, Extension for socket sets, different allen keys from 1 - 10mm, Various screwdriver sets. Pliers assortment.

Condition: new, range L-W-H 780x480x105 mm weight 79,5 kg 7 St. Tool trolley with 7 drawers. Tool trolley has two normal and two swivel castors with brakes. Tool trolley completely lockable with an integrated lock. Drawers can be locked per compartment. All drawers equipped with quick lock and soft-closing mechanism. Tool trolley is equipped with 196 pieces of tool parts: 3 pcs socket wrench sets: 1/4" from 4 - 14mm, 3/8" from 6 - 22mm and Torx from E10 - E20, 1/2" from 8 - 32mm. Gbjdeu Imlhspfx Aikow Various screwdriver sets. Extension for socket wrench sets, various Allen keys from 1 - 10mm, various files. Ratchet ring spanner set from 6 - 22mm, ring spanner set from 6 - 22mm. Pliers range.

Condition: new, range L-W-H 790 x 460 x 960 mm weight 70 kg 7 St. Tool trolley with 7 drawers equipped with tools - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - Drawer 1 1/4" premium ratchet. 1/4" knee joint 45 mm. 1/4" extension 100mm. 1/4" socket wrench 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm. 1/4" long buttons 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm. 3/8" premium ratchet. 3/8" knee joint 55 mm. 3/8" extension 150mm. 3/8" socket wrench 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm. 3/8" long socket wrenches 10, 11, 12, 13, 14, 15, 17, 19 mm. 1/2" premium ratchet. 1/2" knee joint 75 mm. 1/2" extension 125mm. 1/2" Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32mm. 1/2" Long Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm. - DRAWER 2 Ring, ratchet and socket wrench set consisting of. Sockets 8, 9, 10, 11, 12, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30mm. - DRAWER 3 1/4" arbor drill TT8, TT9, TT110, TT20, TT25, TT27, TT30, TT40. 1/4" plug-in bits T8, T9, T10, T15, T20, T25, T27, T30, T40. 1/4" plug-in bits HW3, HW4, HW5, HW6, HW7, HW8. 1/4" recording bits S0, S1, S2, S3, S4. Gbjdpfxju Imnps Aikjw 1/4" locating drill V6, V8, V10. 1/4" locating drill H6. 1/4" receiving bits FD4, FD5.5, FD6, FD7. 1/4" recording bits PH1, PH2, PH3. 1/4" pickup bits PZ0, PZ1, PZ2, PZ3. 1/4" recording bits H2, H4, H5. 8mm locating bits PZ1, PZ2, PZ3, PZ4. 8mm locating bits PH1, PH2, PH3, PH4. 8mm locating bits T20, T27, T30, T35, T40, T45. 8mm locating bits SL 4, SL5.5, SL6, SL6.5. 8mm allen bits Allen 7, 8, 10. 1/2" recording bits M18 Spline (POWER) 1/2" plug-in bits H14, H17, H19, H22, H24. 1/2" locating bits M16 Spline. 1/2" arbor M16 Spline 100 mm long. 1/2" locating drill T80 - 100 mm long. 1/2" pick-up bits M9, M16 - 100 mm long. 1/2" locating drill R9 - 100 mm long. 1/2" Pick-up Bits R10 - 140mm long. 1/2" drill T40, T45, T50, T55, T60, T70 - 140 mm long. 1/2" drill H10, H11, H13 - 140 mm long. 1/2" drill M10, M12, M14 - 140 mm long. 1/2" locating drill H5 - 160 mm long. 1/2" pickup bits H7 - 230mm long. 1/2" locating drill R7, R8 - 230 mm long. 1/2" locating drill H7 - 230mm long. 1/2" locating drill T30 - 300 mm long. 1/2" adapter to 10 mm square. - DRAWER 4 screwdriver flat. 2.5x50, 3x75, 5x100, 6x100. screwdriver cross. PH 2.5x50, 4x75, 5x75, 6x100, 8x150. Impact Screwdriver Plat. 5x75, 6x100, 8x150, 6x38 Stubby. Cross Impact Screwdriver. 5x75, 6x100, 8x150, 6x38 Stubby. - Drawer 5 T-handle Allen with ball head. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. T-handle Allen. 2x100, 2.5x100, 3x100, 4x150, 4.5x150, 5x150, 6x150, 8x200, 10x200mm. - DRAWER 6 Water pump pliers 250 mm. Combination pliers 150 mm. Needle nose pliers 150 mm. Curved pliers 150 mm. Side cutters 150 mm. Inner curved sealing pliers 170 mm. External curved sealing pliers 170 mm. External sealing pliers 180 mm. Sealing pliers 1.5 x 102, 2 x 102, 3 x 114, 4 x 127, 5 x 127, 6 x 140 mm, Claw hammer with fiberglass handle. - DRAWER 7 Socket wrench 6mm. Socket wrench 7mm. Socket wrench 8mm. Socket wrench 10mm. Socket wrench 11mm. Socket wrench 12mm. Socket wrench 13mm. Socket wrench 14mm. Socket wrench 15mm.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring Gbsdpou Impysfx Aikow spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, Permissible total weight: 18,000 kg, Electronic Braking System (EBS), Electronic Stability Program (ESP), Anti-Slip Regulation (ASR), Auxiliary air conditioning, Comfort seats, Driver's seat with air suspension, Radio, Leather steering wheel, Power steering, Sunroof, Immobilizer, Central locking, Sun visor, All-season tires, Cool box, Digital exterior mirrors, XG cab. Adaptive Cruise Control with Forward Collision Warning (FCW) and Advanced Emergency Braking System (AEBS-3). Lane change warning system. Front axle: 8.00 t, Parabolic, 163N RR, not applicable. Emission class: Euro 6 OBD-E. Engine: H6. Fuel: B7. Automated transmission, TraXon, 12 gears. Wheelbase: 4.00 m / rear overhang: 0.99 m. Standard component arrangement. Warranty Plus: Drivetrain - 3 years / 500,000 km. Chassis version: Front: Aero floor panel, cab with air suspension, exterior sun visor, LED headlights and fog lights, LED skylights, additional LED lights on the cab roof, pre-wiring for two LED headlights on the rear of the cab, 2 rotating beacons on the front of the cab, prepared. Windshield with sun protection film, laminated glass with sun protection film, no front mirror, DAF Corner View. Central locking, 3 keys, 2 remote controls. Side fenders, extended. Both sides foldable. Side skirts with extension at the top/bottom. Lower cab step: Crystal White. Steering wheel, leather. Cab, interior trim: Argenta. Driver's seat: Luxury Air. Armrests on both sides of the driver's seat. Driver's seat, swivel base. Passenger seat: Cinema. Table. Fabric upholstery. Armrests on both sides of the passenger seat. Storage compartment with drawer in the center console. Refrigerator and drawer. Preparation for air compressor. Xtra Comfort mattress + topper for lower bunk. Upper bunk. Curtains with separating curtain. LED interior lighting: Luxury. Automatic cab climate control. Auxiliary air conditioning, integrated. Sunroof with electric operation. Accessory power supply: Standard + 2x 40 A. ECAS remote control with extended functions. FMS connector, extended and prepared. PACCAR Connect, 10-year subscription. DAF Truck Navigation. Gjdpe Agxh Hsfx Aiksbw

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, traction control, Permissible total weight: 18,000 kg, seats upholstered in fabric, interior color: anthracite, air suspension, tachograph, electronic braking system (EBS), electronic stability program (ESP), anti-slip regulation (ASR), auxiliary air conditioning, driver's seat with air suspension, power steering, all-season tires, refrigerator, speed limiter, XG cab with adaptive cruise control with forward collision warning (FCW) and advanced emergency braking system (AEBS-3), lane change warning system (RR), not applicable, emission class Euro 6 OBD-E, engine H6, fuel B7, automated transmission, TraXon, 12 gears, standard component arrangement, PACCAR Connect 5-year subscription, BDF pack, multi-body system 1120-1320 mm, prepared, chassis version, front: Aero floor panel, air-suspended cab, exterior sun visor, LED headlights and fog lights, two LED headlights for the rear of the cab, windshield with sun protection film, laminated glass with sun protection film, no front mirror, DAF Corner View, central locking, 3 keys, 2 remote controls, driver's seat: Luxury Air, armrests on both sides of the driver's seat, passenger seat: Comfort Air, storage compartment with drawer in the center console, refrigerator and drawer, preparation for air compressor, Xtra Comfort mattress for lower bunk, upper bunk, curtains with partition curtain, LED interior lighting: luxury, automatic cab climate control, auxiliary air conditioning, integrated, accessory power supply: standard + 2x 40 A, ECAS remote control with extended functions, FMS connector, extended and prepared, digital tachograph, VDO version G2V2A, speed limiter setting 85 km/h, reversing warning system, main switch, chassis, front: 8.00 t, air suspension, 161 N, front air suspension: medium, automatic operation, lifting device, 3 'Continental' F1, 315/70R22.5CGW CEPS5 158/150 L Steering ABA 3P R1, 315/70R22.5CGW CEPD5 154/150 L Traction ACA 3P R2, 315/70R22.5CGW CEPS5 158/150 L Steering ABA 3P, MX-13 engine, 355 kW / 483 hp, cab emblem: 480, traction assist 15.0 t, rear axle ratio 2.05, mechanical differential lock. Gedpfe Agxinox Aikebw