Used Drag Finishing Machine for sale (64,764)

Condition: good (used), Year of construction: 1994, functionality: fully functional, Walther trowal CD600 - 380V - Year of manufacture: 1994 - Weight: approx. 1,140 kg Hnjdpfxsuykchs Afnsh - Dimensions (LxWxH): 165x248x155 cm - Very well-maintained deburring machine - No control panel included and no pneumatic cylinder for lid opening

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under power by appointment. Hnedpfjxwdwljx Afneh Including Felsomat FZ250 Loading system Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Hedpfxsxq Hknj Afnjnh Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Hnjdpfx Afoxqrg Ionoh Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW Hodpol Dw D Eofx Afnsnh - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: good (used), Manufacturer ITALMECCANICA Model MECPOWER 4TB/1600 Year Feb-06 No. A11 Passage width 1600 mm Sanding group 4 Passage height 130 mm Grinding group 2 rollers Minimum workpiece length 400 mm Upper group 2, lateral group 2 Edge sanding yes Length 3300 mm Width 2450 mm Height 2250 mm Power 11kW Supply 3P+N+PE Weight 2500kg Hnjdpfx Afsxividjnoh

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm Hedpfjqhquwex Afnonh - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition Hsdpfx Aexfwfljfnenh and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 1998, condition: good (used), Hello Dear Interested Parties We are offering a well used Rösler vibratory finishing machine. This Rösler continuous grinding machine has been used since 2015 for own use and we are the 2nd owner. It is sold because of a reconstruction of the production hall and other project purposes. Manufacturer: Rösler Throughfeed Line Type: R 650 / 4600 DA Machine No.: 19289/98-06 Year of construction: June 1998 Control: SPS control Plant & Accessories: Dosing equipment Hnodpfx Aeihvr Rjfnoh Vibrating feeder buffer R 20/6/1,5 SR-P To conveyor 1, R470/4000 FB/S to spraying system Spraying system R 12/6 SM-E-So To conveyor belt 2, R470/2500 FB/S to continuous plant To conveyor belt 3, R470/1500 FB/S to circular dryer Granulate rotary dryer RT 850EUR Sludge tanks Central control cabinet with PLC control S5-95 Remark: Plant fuses perfectly, inspection on site is possible by appointment, this plant is still under power and can be tested if necessary. since here is a used trades, no warranty or no guarantees for. MFG

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Hnjdpefqpxijfx Afneh Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Hjdpfx Afodzqn Dsnonh Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg Hnodpfoxdfabjx Afnoh d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: good (used), WALTHER TROWAL - Type CA 340 - Speed range: 800 - 1500 rpm - Drive power: 7.5 kW - Separation unit - Acoustic enclosure cover - Controls / Start / Stop / Timer / Separation Dimensions: Hjdpfextbidsx Afnsnh LxWxH: 1.8 x 1.6 x 1.8 meters / Weight: 1300 kg Errors and input mistakes excepted

Condition: excellent (used), Year of construction: 2018, Converting Line Hnodpfxjw I T Uco Afnoh GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Year of construction: 1972, condition: used, This machine is 3x available. Data: Hedpfx Afog Umitonsnh Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Condition: used, Year of construction: 1981, workpiece length 1500 mm Hedpfx Afot Hwpmsnenh stroke 0 mm swing dia. 500 mm total power requirement 30 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: new, The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes. The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes. The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality. Minimum tube vibration even on the biggest lengths: With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems. Straight or curved tubes polishing: ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually). Quick set-up: Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing. Low heat: The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems. Oval tubes: Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100 Hjded Hfnbjpfx Afnonh Finishing after tube drilling: Maximum adaptability of the abrasive belt to holes or graps in the material surface. Technical Details - ML100: Working capacity (Ø mm) 10 - 114 No. Stations 1 Abrasive belt dimensions (mm) (2x) 50x940 Abrasive belt speed (m/s) 3-22 Feeding speed (m/m) 1-5 Abrasive belts motor (kw) 3 Wheel motor (kw) 1.5 Feeding motor (kw) (2x) 0.12 Total power (kw) 5 Consumption (A) 11 Dust extraction connection (Ømm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Hnsdpfxspr Utle Afnsh Weight approx. 1400 kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 10248275, Offer 24438 Vibratory finishing machine with circular vibrator - vibration dryer + centrifuge Technical data: - Mass finishing machine - Circular vibrator WALTHER CD 200 Tank capacity approx. 200 L Useful volume 92 L Max. Workpiece size measured diagonally 180 mm Screen area 2,097 cm² Drive 400V / 1.5 Kw Weight 550 kg - Vibration dryer WALTHER G 100 C Max. Workpiece size measured diagonally 160 mm Hnsdpfjufimasx Afnjh Heating capacity 3 Kw Weight 380 kg - Basket centrifuge WALTHER ZM 03 Capacity 1000 L/min. Drum capacity 14 L Aluminum drum with diameter 102.5 mm Wall thickness 9.5 mm Dirty water tank 300 L Drive 400V / 1.5 Kw Weight 650 kg - Separate control cabinets with operating elements - Total space requirement approx. W 5000 x D 1600 x H 2000 mm - Total weight of the system approx. 1600 kg

Condition: used, functionality: fully functional, 0,75 kW Spraying device Hjdpfxjigaf Re Afnsnh Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Control panel top 4 motors à 0,18 kW for brushes

Condition: good (used), Vibratory Finishing Machine / WALTHER CC315 incl. control unit -Model CC315 -Speed range 945-1445 rpm -Separate control / On - Off / Timer etc. -Soundproof lid Hsdjw R U U Ajpfx Afnonh -Wastewater cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850 kg Subject to errors and omissions.

Condition: new, Machine type: Trough vibrator TV73 Shown: TV73 incl. soundproofing Manufacturer: Eurotec Innovation GmbH Rated speed: 1500 rpm Gross volume: 470 liters Internal length of container: 1100 mm Internal width of container: 680 mm Interior height of container: 700 mm Supply line: 400V - 16A - 50Hz Hjdpeh Ukxlsfx Afnsnh AREAS OF APPLICATION: - Deburring, smoothing and polishing - Descaling, derusting and cleaning - Fillet edges - Finishing of surfaces ADVANTAGES: - Wiper edge to reduce component adhesions on the inner wall of the container - Particularly economical even if used only occasionally - Optionally available as a version for pressure deburring and for ball polishing - Robust construction with a low-maintenance vibration motor - Integrated mount for lifting and moving the system using a lift truck or forklift - Fast container emptying and abrasive change through a generous drain opening for abrasives - Quick-change drain sieve made of polyurethane - Rubber-damped feet to reduce vibration transmission The stated price is net plus 19% sales tax and plus freight. A suitable switchgear is required to operate the system. In the pictures, the system including accessories is shown, which is optionally available. The price refers to the basic machine (TV45) ----- Please contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation takes place by means of telecommunication (email, fax, telephone, message portal), where we first make you a non-binding offer, in which we also inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase/conclusion of contract takes place.

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. Hnjdpfjh Nnbcox Afnsh * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: used, Manufacturer: Carl Kurt Drum diameter: 700 mm Hsdpfou Abr Esx Afnenh Motor: 1 kW

Year of construction: 2013, condition: as good as new (ex-display), -for manual grinding parts -Power: 0.75 kW -Stepless speed adjustment -Supply: 230 V Hnodpfed Ealhjx Afnjh -Demonstration machine built in 2013 -incl. wheels K150 / K180 / K220 -Weight: 120 kg