Used Dowel Insertion for sale (2,229)

Condition: used, maximum load weight: 13,250 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,995 mm, loading space volume: 57 m³, total length: 7,820 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2017, Vehicle No. G0123114_SAMPLE – Manufacturer: WECON. Podpjz A Rm Iefx Ac Aogt * Simple corner fittings * Outline marking on side/rear * Load certificate Code-XL * Mechanical lift-up roof * Portal door with double rotating bar locks (inside) * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing options * Perforated pallet stop rail LASI CODE XL!!!. Delivery time upon request. Tarp used. Steel insert slats with integrated combination lashing rail (slot/hole). Technically ready for use without further repairs. Substructure galvanized. Valid UVV certification. UVV documents available. Isolated paint chipping on components of the interchangeable body. Deformations/stops on components – see pictures. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request by phone or email.

Condition: used, maximum load weight: 13,250 kg, overall weight: 16,000 kg, first registration: 01/2015, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,995 mm, loading space volume: 57 m³, total length: 7,820 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2015, Vehicle no. G0123103_SAMPLE – Manufacturer: WECON. * Simple corner brackets * Insertion rail (aluminum) * Load certificate Code-XL * Mechanical lifting roof Pgodpfx Asz A Rpcsc Ast * Portal door with double swivel bar locking (inside) * Side sliding tarpaulin * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing points LASI CODE XL!!!. Delivery time upon consultation. Tarpaulin is used. Technically ready for operation without further repairs. Partially painted. Subframe galvanized. Valid UVV certificate. UVV documentation available. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Psdpfxey Auhzs Ac Aogt Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: used, Year of construction: 2016, Dough divider WP Kemper Relaxer S This model produces dough strands one at a time, gently handling the dough. The tedious manual dough strand production is eliminated in small and medium-sized businesses. Dough strand production for storage in rattan or plastic baskets. Year of manufacture: 2016 Condition: cleaned and inspected Performance: 4 dough strands per minute / 240 per hour Dimensions of the dough strands (L x W x H): 850 x 165 x 110 mm Suitable for TA 150 to 180 Hopper capacity approx. 160 kg (opening 720 × 600 mm) Hopper filling height: 1830 mm (loading with a tilting lift is possible) Insertion device for 1000 mm long baskets Operation via two-hand safety switch Machine is mobile with a locking mechanism External dimensions (L x W x H): 1500 x 750 x 1830 mm Pedpfez A Skbox Ac Aegt

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires Podpfozz Umxsx Ac Ajgt * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 16 K/min Cooling Rate: approx. 21 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Pedpfsz Air Sjx Ac Aogt Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions including overhangs (L × W): approx. 2,857 × 1,115 mm Equipment: Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / insertion levels Side test chamber openings RS232, RS485 / RS422 and USB Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to model series documentation: approx. 1,350 kg Shipping by freight forwarder possible Condition: Used Workshop tested Optical condition according to the pictures. Scope of delivery: Vötschtechnik ClimeEvent C/480/70/15 Shelves according to the pictures Existing documentation / operating manual Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. Podpjzz Hk Nofx Ac Asgt The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: used, mileage: 18 km, power: 75 kW (101.97 HP), first registration: 11/2025, fuel type: diesel, empty load weight: 1,568 kg, overall weight: 2,300 kg, wheelbase: 2,970 mm, next inspection (TÜV): 11/2027, color: grey, emission class: euro6, number of seats: 2, loading space volume: 4 m³, loading space length: 2,140 mm, loading space width: 1,600 mm, loading space height: 1,230 mm, construction height: 1,860 mm, working width: 1,855 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, traction control, Navigation via smartphone possible. Extended warranty for 3 years, up to 250,000 km. Air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, basic digital cockpit, lane keeping assist, front assist system with city emergency braking function, traffic sign recognition, driver alertness system, cruise control, speed limiter with predictive speed control, leather multi-function steering wheel with shift paddles, rear parking sensors, full-size spare wheel, summer tires, windshield wipers with intermittent function and light sensor, rain sensor, digital radio reception (DAB+), Composition audio system (touchscreen color display), Bluetooth hands-free system, USB multimedia interface (Type C - with increased charging performance), App-Connect, emergency call system, tire pressure monitoring display, heat-reflecting glass, tachometer, driver airbag, front passenger airbag, front head and side airbags, electronic stability program (ESP), brake assist system - ASR/ABS - EDS - MSR, start/stop system, preparation for We Connect and We Connect Plus mobile online services, service booklet available, right sliding door, immobilizer (electronic), headlight range control, tool kit and jack, exterior temperature display, electronically controlled power steering (Servotronic), paint: Pure Grey, wheel covers, special paint: Pure Grey, commercial vehicle registration, non-smoker package, exterior mirrors and door handles in black, unpainted, sliding door trim in silver, exterior mirrors in black, unpainted, sliding door trim in silver, roof rails/roof rack preparation, automatic headlight activation (ALS), standard rear lights, preparation for online services, interior trim: matte decorative inserts, driver's seat, front passenger seat, front floor covering (carpet), interior paneling in the cargo/passenger compartment: standard, driver's seat height adjustable, folding remote key (2), door seals with dust protection, plastic door panels, front seat belts with belt tensioners - height adjustable, seat belt warning system for front seats, interior light in the cargo/passenger compartment: 1 piece, open glove compartment, preparation for alcohol interlock system (Alcolock), front beverage holders, tie-down points in the luggage/cargo compartment, first aid kit and warning triangle, front camera (multifunction camera in windshield), anti-lock braking system (ABS), electric parking brake with auto-hold function, multi-collision brake, steering column (steering wheel) mechanically adjustable - height/length adjustment, SCR system (AdBlue technology), body/superstructure: panel van, drive type: front-wheel drive, wheelbase 2970 mm, 6-speed gearbox, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will gladly advise you. This offer is non-binding; no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an additional charge. Export license plates available here. Trade-in of your old vehicle possible. Retrofitting of: - trailer couplings, up to 3500 kg possible - auxiliary heaters - screen for reversing camera or navigation via mobile phone (Android Auto) - reversing system with rear-view camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs Pgodpsw S S I Nefx Ac Aot

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2017, Vehicle no. G0123015 – Manufacturer: Kögel. * Sliding roof tarpaulin * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double twist-lock fasteners (inside) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof tarpaulin. Financing possible. Delivery time: AVAILABLE IMMEDIATELY. Multi Lock outer frame. Technically ready for operation without further repairs. Substructure (KTL) coating with signs of wear. Valid UVV certificate. UVV documents available. LASI CODE XL!!! Pgjdpfx Acsz Dmz De Ajt Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece - With wide table supports and dovetail guides for the vertical slide - With control panel above the table - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws - ELGO 89P23 control system for height, tilt, and stop - Program memory for 99 programs - With sliding table insert Pgsdpfx Aszyy Dtjc Aet - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so Pgjdjz Dmn Repfx Ac Ajt

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Podpfxsz Dmn Ds Ac Asgt Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: used, Stacking rack - Used RA2514 Technical Specifications:: External dimensions at the bottom: 1530 x 1165 mm Pedjzlrq Nepfx Ac Aogt Dimensions between the tubes: 1300 x 935 mm Height: 300 mm Pole size: 60.3 mm tubes Insertion length: 170 mm Net weight: 33 kg We have also the tubes on stock. Price: plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Pedpjv Sthgsfx Ac Ajgt Terms of delivery: ex location

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Pgjdexmamuopfx Ac Ast Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, Euro Classic range – Inox finish Electrical power 400 V three-phase Power supply 3N~ 50/60 Hz Maximum power 9.5 kW Average hourly consumption 4.5 kW/h Capacity 9 pizzas Ø 30 cm Tray capacity 2 x 600 x 400 mm Chamber 930 x 930 x 170 mm Maximum temperature 450 °C Independent digital regulation for dome / hearth Dome, hearth, walls, and bottom made of refractory material Heating elements inserted into the stone Counterbalanced door with lower swing Panoramic glass window Protected internal halogen lighting External dimensions 1320 x 1260 x 400 mm Pgsdpfx Acjzx Dzts Ast Net weight 200 kg Stackable up to 3 chambers General description The Italforni Euro Classic EC9-I professional electric pizza oven features a 930 x 930 x 170 mm chamber that can bake up to 9 pizzas with a diameter of 30 cm simultaneously or accommodate 2 trays of 600 x 400 mm. It reaches 450 °C and benefits from independent electronic digital regulation for the dome and the hearth. What makes this model stand out Its chamber is entirely made of high-density refractory material: dome, hearth, side walls, and bottom. This design promotes insulation, thermal homogeneity, and temperature recovery, as advertised for this model. The armored “hy•pe” heating elements are inserted directly into the stone to limit energy loss. Key advantages Capacity of 9 pizzas Ø 30 cm Independent dome / hearth regulation Entirely refractory chamber Maximum temperature of 450 °C Counterbalanced door with panoramic window Protected internal halogen lighting Stackable up to 3 chambers, and a smoke extraction module is possible.

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Pgodpfxezdf Utj Ac Ajt Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. Pjdoyy S Uajpfx Ac Asgt The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Pgjdpfx Ajz Afhpec Aet Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details. Pgodpfx Aoz Dh Dtsc Ast - Rotary Table Indexing Precision: 360 x 1°, precision 6"- Maximum clamping force of the rotary table: 500 daN (centered)- Rotary Table Max Tangential Torque: 10,000 Nm (clamped)- Rotary Table Max Tilting Moment: 8,000 Nm (clamped)- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Magazine Capacity: 80 tool pockets, 1 insertion pocket- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Measuring System: Direct in X, Y, Z axes- Positioning Tolerance: 0.007 mm- Optional Equipment / Features: Hydraulic workpiece clamping, central cooling unit for motor spindle and cabinet, probe with IR receiver, chip conveyor, tool coding, manual workpiece setup station (rotatable 4x90°), drill breakage control, prepared for emulsion mist extraction- Included Components: Without clamping device, without machine pallet Technical Specification Taper Size SK 40

Condition: excellent (used), L-Sealer with Shrink Tunnel For sale is a professional, semi-automatic L-sealer with an integrated shrink tunnel from the quality Italian manufacturer Pactur. It is ideally suited for the fast, professional shrink-wrapping of cardboard boxes, books, bottles, textiles, and other packaged items. The Ladypack 80/SI model is distinguished by its exceptional flexibility and very large sealing frame. It combines the sealing and shrinking processes into a single, compact, mobile unit, saving a significant amount of space on the production floor. Impulse Sealing System: The L-sealer operates using a Teflon-coated sealing wire. It produces clean, extremely strong seals without generating smoke. Efficient Shrink Tunnel: The integrated tunnel features a closed-loop air circulation system with adjustable air deflectors. This ensures perfectly uniform heat distribution and a flawlessly smooth shrink finish—even with complex product shapes. Precise Digital Control: The clear control panel allows for exact adjustment of sealing time, sealing wire cooling time, and tunnel temperature to match the specific film thickness and type (PO, PE, or PVC) being used. Heavy-Duty Conveyor Belt: The tunnel is equipped with a durable, heat-resistant metal mesh conveyor belt. It reliably transports even heavy items (e.g., printed materials, canned goods, or wooden components). Ergonomic Infeed Table: The separate, mobile preparation table allows for quick and easy insertion of products into the center-folded film. The film roll unwinds smoothly on ball bearings. Ideally suited for print shops, logistics centers, laundries, or contract packers for shrink-wrapping: - Cartons and multipacks - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle packs and cans Technical Specifications & Features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 Series Type: L-sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packages) Control system: Digital control unit for precise adjustment of sealing time and tunnel temperature Conveyor: Robust, heat-resistant metal mesh belt in the shrink tunnel Mains voltage: 380 V / 3-phase Max. power consumption: 11.5 kW Mobility: Entire system and the separate infeed table are mounted on sturdy swivel casters Max. film roll width: 700 mm Max. film roll diameter: Ø 250 mm Pgsdpfoz Dtf Asx Ac Aet External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (determined by the tunnel opening height) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, empty load weight: 5,193 kg, maximum load weight: 12,807 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2017, next inspection (TÜV): 05/2027, loading space length: 7,726 mm, loading space width: 2,478 mm, loading space height: 3,004 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 99,650 mm, suspension: air, tire size: 445/45 R19,5, Year of construction: 2017, front tire size: 445/45 R19,5, emission class: none, Axle manufacturer: Schmitz SCB, brake: disc brake, Edscha cover, insertion boards: 4 rows of aluminum slats, suspension: air/air, liftable roof, low coupling height, customs seal, sliding tarpaulin left/right, 3 storage boxes, support jacks front and rear, 2 reversing lights (LED), 4 swivel rod closures, pallet stops left/right, continuous lashing points in the outer frame, 7 pairs of lashing eyes. Sold only in conjunction with a MAN 24.460 LL BDF Jumbo from 05/2019. Pgedpfx Acezra N Tj Ast

Condition: new, 5x5m storage platform, load: 500kg/sqm lower edge: 2.5m, approx. 25sqm system platform Podpfx Aoz Eqh Rec Ajgt Data : - Length : approx. 5m - Width : approx. 5m - Lower edge of platform : approx. 2.5 m - Top edge of stage : approx. 2.88 m - Total area : approx. 25sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 5.0m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 02 x C profile 5000 mm , sendzimir galvanized . - 08 x S profile 4800 mm , sendzimir galvanized . - 04 x Support 2500 mm , RAL 7016 . - 03 x strut brace 2517 mm , RAL7016 . - 12 x chipboard 2400 x 1000 x 38 mm natural/white P6 . - 04 x Lining plates for supports . - 04 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 4.988 € net plus statutory VAT. You will receive an invoice with VAT shown. Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press Psdsvxgrrepfx Ac Aegt

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Pgodpfx Aewzmu Rsc Ajt Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...