Used Double Spindle Lathe for sale (24,402)

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: Hsdpfx Aspz Hubjfnonh - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Hodsv D Ip Nspfx Afnonh Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Hsdpfx Afjmgaddsnonh Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood Hedpfehy Tdysx Afnonh - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Hedpfx Afeg R S Rcsnjnh Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: good (used), Year of construction: 1999, TOS SU 150 Variant CNC Lathe TOS SU 1500 Variant with Heidenhain Control, year of manufacture 1999, in excellent original condition The machine comes from the special production department of a renowned German mechanical engineering company. CE compliant! Technical Details: Year of manufacture: 2004 Working Range Swing diameter over bed: 1500 mm Swing diameter over support: 1190 mm Swing diameter over extended slide with T-slots: 1100 mm Swing diameter over right-angle hardened guide with T-slots: 1020 mm Distance between centers: 2000 mm Max. workpiece weight (without/with support): 6000/8000 kg Spindle size: 11 DIN 55027; bayonet Spindle bore: 128 mm Speed range: 4 - 630 rpm Main drive power: 37 kW Max. spindle torque: 12,000 Nm Tailstock Quill diameter: 165 mm Internal taper: 100 (1:20) mm Reduction sleeve: 100 (MK6) Total power consumption: 67 kVA Weight: 9,400 kg The universal spindle lathe SU 1500 Variant is a numerically controlled machine designed for roughing and finishing of shaft and flange parts, as well as for threading, drilling, taper turning, and machining of various rotationally symmetrical surfaces. The machine is built with a rigid horizontal bed, the guideways are hardened and ground, and the counter surfaces on the longitudinal slides are coated with Turcite B sliding material. The SU 1500 Variant lathe is a machine with automatic cycle control, equipped with a Heidenhain control system. The feed drive for the longitudinal axis (Z-axis) is provided by a servo drive directly to the ball screw. The cross-feed drive (X-axis) is also provided by a servo drive directly to the ball screw. Both feeds are measured by rotary encoders mounted on the servo motors. The machine can be operated either manually or in controlled (automatic) mode. About the machine: Hnjdpfxsx Dy I Tj Afnjh Offered here is a CNC lathe TOS SU 1500 Variant with Heidenhain control, year of manufacture 1999. This lathe is in very good original condition. Coming from a shop where it was only used occasionally for special builds. The control system is very user-friendly. The ways are regularly lubricated by the central lubrication system. The TOS SU 1500 Variant has been mechanically and electrically inspected by us. Take the opportunity to view and test the TOS SU 1500 Variant under power at our premises. You will find further lathes from reputable manufacturers on our website.

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Hnodpfx Asxdi Agefnjh

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Hjdpfoxxm A Hsx Afnjnh Tool holder Steadies Live centre

Condition: new, Year of construction: 2024, Working range Center distance 1000 mm Turning diameter over bed 356 mm Rotation Ø over support 220 mm Bed width 206 mm Travel paths Hjdpfx Aou Sklyefnjnh X-axis travel 178 mm Z1-axis travel 92 mm Swivel range top slide ± 50° Main spindle Speed range, high 550 1/min - 3000 1/min Speed range, low 30 1/min - 550 1/min Spindle holder Camlock D1-4 Spindle bore 38 mm Spindle cone 5 MK Feed rate Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Thread cutting Thread cutting, metric (37) 0.4-7 mm Thread cutting Whitworth (28) 4-56 TPI Tailstock Tailstock pinol diameter 45 mm Tailstock taper 3 MK Tailstock quill stroke 120 mm Tailstock cross adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 1,350 mm, spindle bore: 120 mm, turning diameter over bed slide: 1,000 mm, center height: 675 mm, turning length: 5,000 mm, Heavy-duty lathes POREBA - Lathes after general overhaul Center height mm 675 Rotation Ø over bed mm 1350 Rotation Ø over bed slide mm 1000 Rotation Ø in the offset mm 1600 Length of offset A1-15/DIN 55027 mm 220 Center distance mm 5000 Spindle bore mm 120 Taper in main spindle metric 130 Front spindle bearing mm 220 Hjdpfohmuuysx Afnjnh Spindle mount Standard / fixing screws M22 ISO-702/I A1-15 Option DIN 55027/15 Max. Workpiece weight - between centers: kg 9000 - with 2 steady rests: kg 15000 - overhung: kg 2000 Bed width mm 660 Turning tool cross-section (HxW) mm 32 x 40 SPEEDS mechanical 18 speed levels Main motor power: kW 45 Number of steps: 18 Speed range: rpm 10-500 rpm or 12.5-630 rpm RIDING STOCK Quill diameter mm 190 Quill stroke mm 300 Cross adjustment mm +/- 15 ADJUSTMENT Number of steps 70 Range of longitudinal feeds mm/rev 0.07 - 10 Range of face feeds mm/rev 0.035 - 5 Feed range of the top slide mm/rev 0.017 - 2.5 Rapid traverse lengthwise mm/min 4000 Rapid traverse flat mm/min 2000

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg Hnsdpfxeu Aftgo Afneh >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev Hedpfx Aovtp Edsfnsnh >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : Hedpfx Asvivmysfnsnh We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 Hodpfoxcuazox Afnenh >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Weiler Primus VC Precision Centre Lathe 3-axis Digital Readout K&C NEW with VC Drive, Stepless Speed Adjustment, and CE Compliance, Very Good Condition Technical Data: >> Year of manufacture: 2003, Machine No. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis Digital Readout K&C NEW >> Collet chuck system with collets from 3 to 26 mm, new, 1 mm increments, NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 toolholders >> Electric chip guard >> Machine feet Hedpfx Afow Idllenenh >> Splash guard About the Machine: This offer is for a Weiler Primus VC lead and feed screw lathe, built in 2003 and in very good original condition. A very nice lathe with VC drive and stepless spindle speed control. The digital readout and scales from K&C are new. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. The K&C digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and be convinced of its condition.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Precision Lathe Model Condor 81 Lead and Feed Spindle Lathe with 3-Axis Digital Display from K&C NEW Technical Data: >> Year of manufacture 1987 Machine No. 87 835 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Hjdpswrmuxsfx Afnjnh >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral-Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis digital display from K&C new, 12 months manufacturer's warranty with operating manual Functions: Switch mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming 200 pcs, taper calculation, radius/diameter, quick zeroing, reversing of count direction >> 1 piece 3-jaw chuck 160 mm NEW, 2 sets of jaws >> 1 piece 4-jaw chuck 160 mm, 1 set of jaws >> Collet equipment and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Machine feet About the Machine: A used Weiler Condor 81 in very good condition is offered. The machine is, of course, fully functional and has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine on site under power.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch Hedew Nw Dqopfx Afnenh >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on Hnsdjwb Supspfx Afnjh >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: like new (used), Year of construction: 1997, functionality: fully functional, center height: 150 mm, center width: 630 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Hnjdpjwgd R Hjfx Afneh Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Hnodpoxf E Rcsfx Afneh Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1987, Lead and draw spindle lathe Make: Boehringer Model: DUE 560 Year of manufacture: 1987 used Technical data: turning diameter 250 mm turning length approx. 1200 mm Rotation Ø over bed 560 mm Rotation Ø over facing slide 365 mm Max. workpiece between the centers 500-800 kg Spindle diameter in front bearing 100 mm Spindle bore 62 mm Spindle head DIN 55022 No. 8 Hsdstud S Ujpfx Afnjnh Travel Face slide travel 345 mm Top slide travel 125 mm Tailstock/pinsØ 80 mm Tailstock holder MK 5 Quill stroke 190 mm Longitudinal feed 60 x 0.0315-28 mm/1 Face feeds 60 x 0.016-14 mm/1 Tapping capacity 0.125-112 mm Total power requirement 20 kW Space requirement approx. 3.5x2.0x2.2 m Weight: approx. 2.5 tons

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 4 jaw faceplate Acu Rite digital display Hjdpfx Afjvq Ibxonsnh Coolant tank Longitudinal stop Chip guard at the rear Chuck guard

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - - Handwheel on the left of the support - with 3-axis digital display FAGOR INNOVA30iT (Art. No. 103877) Hnsdpfx Ajwrndzjfnoh * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, bed width: 250 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 35 rpm, quill mount: MK 3, Equipment: rotational speed infinitely variable, - Demonstration machine - - Handwheel on the left of the support - with steplessly variable spindle speeds and Hedpfx Aswrngcofnsnh 3-axis digital display FAGOR INNOVA30iT (Art. No. 103878) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: new, Year of construction: 2025, turning diameter: 542 mm, turning diameter over bed slide: 542 mm, turning length: 1,500 mm, quill diameter: 80 mm, spindle speed (min.): 1,500 rpm, Specifications: Height of centers: 271 mm Swing over bed: Ø542 mm Swing in gap: Ø730 mm Swing over cross slide: Ø387 mm Distance between centers: 1500 mm Bed width: 320 mm Spindle nose, Camlock taper: D1-8, Ø85 mm Taper 1/19.18 Spindle center sleeve: Ø85 mm Taper 1/19.18 x MT No.5 Spindle bore: 80 mm Spindle speeds: 26–1500 rpm Cross slide travel: 300 mm Main spindle: 10 HP (7.5 kW) Coolant pump Weight: 2000 kg Hnedpfx Afow U Uqljneh Standard scope of delivery includes: Self-centering chuck 250 mm Multifix quick-change tool post Dead center MT.5 Dead center MT.4 with carbide tip Spindle center sleeve Ø85 mm Taper 1/19.18 Leveling pads, 6 pcs Tool set and box Operation manual & parts list Full-length splash guard Halogen work lamp Chuck safety guards Electrical system conforming to CE Steady rest with ball bearing Follow rest with bronze tip Leadscrew safety cover (CE compliant)