Used Double Wheel Grinding Machine for sale (84,666)

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Dodpfx Aqexq Hkuevokn

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors Dksdpfewi Nh Nox Aqvsn *

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Dsdpfx Aqsy R Drljvjkn

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m In our opinion, the machine is in good used condition. The machines were used for the production of connecting rods. Two machines are available. One machine is suitable for pre-grinding and one for regrinding. Accessories, tools, and clamping devices shown are only included in the scope of delivery Dkedpexq R Hajfx Aqven if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm Dkjdpoxuv Udjfx Aqven grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec Dksdpjvnmnrofx Aqvsn workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: used, Year of construction: 1996, Technical details: Dsdoizldxepfx Aqvekn weight of the machine ca.: 15 t

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding Dksdpfx Aet Hw N Hjqven wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Rema double grinding head / school machine wheel mass (in mm) 300/40/76 power (in KW): 1,8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Dodpfx Aehaf Ndjqvjkn Shields Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2023, condition: new, We sell a new double belt grinder. The contact wheels can be purchased in different dimensions. Dkodek D Ex Tepfx Aqvon Technical data: Weight: approx. 350 kg Electrical connection: see type plate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm grinding belts: max. 120 mm x 3500 mm length Suction connection: Ø 160 mm If you have any further questions, please do not hesitate to contact us!

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm workpiece height:210 mm spindle speed max.:2800 U/min Dksdjcxxlrjpfx Aqven distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg Dkodpfxehrkrwe Aqvsn good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Dkedpfx Ajhrkrpsqven Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V Dkjdpfxou Ngrqs Aqvsn total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Double-sided Grinding and Polishing Stand MEYER Type SMP Machine No. 848 Year of manufacture: 1963 Max. grinding/polishing wheel diameter: 800 mm Shaft diameter: 50 mm Wheel mounting hole: Ø 305 mm Wheel spacing: 1470 mm Working height: 550 mm Speed: 710 / 800 / 950 rpm Drive power: 2 x 3 kW Power supply: 380 Volt, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by repositioning drive belts - Dust extraction flange Ø 100 mm - Equipped with 2 corundum grinding wheels, each 40 mm wide, Ø approx. 560 / 480 mm Space requirements (L x W x H): 1700 x 1200 x 900 mm Weight: 850 kg Good condition Dodpfsdzqmhex Aqvjkn

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Dkedpfsrk U Edjx Aqvsn Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2053, For sale is a used DDS 750 XR rotary surface grinder, manufactured in 2002. Dksdpfx Ajza Thtsqven The machine's IONIOC measuring system controller is defective; otherwise, the machine is in working order. Inspection under power is possible at the Remscheid location.

Condition: good (used), Aceti Macchine double grinding wheel Type: FB 90 2/4 ART 101 Diameter grinding stone max: 210 mm Machine height: 130 cm Dksdpfsl I I Upsx Aqvon Weight: ca 125 KG

Condition: used, GÜHRING Drill Bit Grinding Machine Type SS 15 Spiral Drill Bit Grinding Machine Serial No. 909 Year of manufacture: approx. 1977 Maximum drill diameter: 40 mm Grinding wheel diameter right: 300 mm Grinding wheel diameter left: 250 mm Grinding wheel width: 40 mm Grinding spindle speed: approx. 2800 rpm Motor power: approx. 2.2 kW Electrical connection: 380 Volt, 50 Hz - Point angle steplessly adjustable - Point thinning device Dkedpfsdzp Tbox Aqvon - Gear motor for vertical oscillation in front of cup wheel - Diamond dresser holder - Various drill holders - Coolant system Required space (L x W x H): 1200 x 950 x 1550 mm Weight: approx. 1150 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling a lightly used, fully functional, and exceptionally equipped brake disc grinding machine from BUDERUS. The machine is currently still in production and can be demonstrated under power. Dedjy Drh Ujpfx Aqvekn Buderus Brake Disc Grinding Machine, Type BDG220 2A SL Technical data: - Max. workpiece diameter: 440 mm - Max. workpiece height: 150 mm - Max. swing diameter over table: 500 mm - Workpiece spindle speeds, NC programmable: 0 – 1,000 rpm Machine design: Surface grinding spindles on vertical feed axes, mounted on a horizontal travelling column; workpiece spindle mounted on a changeover table for optional parallel main time loading Workpiece dimensions: diameter up to approx. 450 mm Control: Siemens 840D Solution Line with S7-300 PLC Installation data: Weight approx. 8,500 kg, dimensions 3,000 x 2,445 x 1,980 mm, electrical connected load 42 kW (pre-fusing 80 A) Further details regarding the equipment and technical specifications are available with our offer.

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form. Dkedpfxoy H H Hqs Aqvsn

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine Dksdpjd Dfhwjfx Aqven -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Condition: used, workpiece length / mm work piece width / mm workpiece height / mm FLAT GRINDING MACHINE UMA 19 Dodpfx Aqoyk Imrsvskn

Condition: excellent (used), Year of construction: 2012, DISKUS DDS 750 XR – Technical Specifications Machine type: vertical double-disc grinding machine Model: DDS 750 XR Grinding wheel diameter: 750 mm Maximum grinding width (through-feed): 180 mm Maximum material thickness (through-feed): 30 mm Maximum grinding width (plunge-cut): 300 mm Maximum material thickness (plunge-cut): 80 mm Grinding spindle 1 power: 48 kW Grinding spindle 2 power: 48 kW Grinding wheel surface speed (max): 63 m/s Coolant delivery: through the spindle center Feeder type: rotary feeder Feeder speed range: 20 mm/min to 240 mm/min Control system: Siemens 840 D CNC Total machine height: approx. 3,100 mm Overall weight: approx. 13,000 kg Footprint requirements: length approx. 4,900 mm, width approx. 5,000 mm Construction features: triangular rigid frame, linear-guide spindles, 16 CNC axes, central lubrication, coolant filtration Djdpfx Aqswwrqcsvjkn

Year of construction: 2014, condition: new, Double grinding machine REMA DS 40/400 Motor : 3kw , plus four boxes of grinding wheels Dsdpfxjgkrxce Aqvskn