Used Double Sided Planer for sale (25,175)

Year of construction: 1999, condition: ready for operation (used), A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible. Nsdpfx Aow I E D Nsdbowc

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Nwodpfx Asxtff Aedbjc

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Nwedpfx Adjxcx A Tsbjc

Condition: good (used), working width 180 mm working height 120 mm 1 lower spindle 3.7 kW Nwsdpfxeyncgbe Adbjc 2 right spindle 3 kW 3 left spindle 3.7 kW 4 upper spindle 3.7 kW two feed speeds: 6 and 12 m/min

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: Nedsyh Uqcopfx Adbswc 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Nsdpfx Adoyh Um Rebowc Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7713 TECHNICAL DATA - Maximum workpiece width: 240 mm - Maximum workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal: 240 mm, 7.5 kW 2) Right vertical: 130 mm, 5.5 kW 3) Left vertical: 130 mm, 5.5 kW 4) Top horizontal: 240 mm, 7.5 kW 5) Top horizontal: 240 mm, 5.5 kW (Spindles 4 and 5 adjustable electrically up/down) 6) Bottom horizontal: 240 mm, 5.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm *From above: - 8 infeed metal feed rollers, toothed, including 3 double rollers - 4 outfeed smooth rubber feed rollers, including 2 double rollers *From below: - 3 smooth feed rollers - 3 lateral pressure rollers - Infinitely variable feed speed adjustment via inverter - Pneumatically adjustable pressure rollers - Feed motor: 7.5 kW - Feed via cardan shaft rollers - Electric thickness adjustment - Lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic cabin opening/closing - Pneumatic table blow-off - Central table lubrication - Extraction port diameters: 3x120 mm, 3x150 mm - Dimensions (L/W/H): 5300x1700x1800 mm - Weight: 5000 kg Nsdjyh N Ayopfx Adbowc ADVANTAGES – Italian production – 6-head design – For wet and dry wood – Pneumatic cabin opening – Pneumatic table blow-off – Spindles 4 and 5 electrically adjustable – Used planer, in very good condition Net price: 126,900 PLN Net price: 30,200 EUR (depending on exchange rate 4.2 EUR) (Prices may vary in case of significant changes in exchange rate)

Condition: excellent (used), Catalogue number 6368 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) bottom horizontal, 230 mm, 5.5 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) top horizontal, 230 mm, 7.5 kW 5) top horizontal, 230 mm, 11 kW 6) bottom horizontal, 230 mm, 18.5 kW 7) universal, 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, right/left - all spindles equipped with electric brake - spindle diameter: 40 mm - spindles 4 and 5 adjustable electrically up/down - top: 8 metal feed rollers, twisted, including 2 double rollers - top: 4 rubber outfeed rollers - top: 2 hold-downs - bottom: pawls - bottom side: 3 hold-downs - bottom: 2 smooth metal feed rollers - bottom: 2 double rubber feed rollers - rollers pneumatically loaded - feed via Kardana shafts - stepless feed speed adjustment 5–36 m/min Njdpfxoyh N Ago Adbjwc - feed motor 4 kW - electric thickness adjustment 0.75 kW - infeed table length: 1980 mm - fully enclosed in soundproof cabin - central lubrication for the table - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L/W/H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture – 7-head configuration – suitable for wet and dry wood – universal final spindle – unpainted – used four-side planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR, depending on exchange rate 4.2 EUR (Prices may vary in case of higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication Nwsdpsyh Nzvjfx Adbjc - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES Nwedpfex Syq Tex Adbsc – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7294 TECHNICAL DATA - Maximum workpiece width: 230 mm - Minimum workpiece width: 15 mm - Maximum workpiece height: 160 mm - Minimum workpiece height: 10 mm 7 spindles: 1) bottom horizontal 230 mm 7.5 kW 2) right vertical 160 mm 5.5 kW 3) left vertical 160 mm 5.5 kW 4) right vertical 160 mm 5.5 kW 5) top horizontal 230 mm 7.5 kW 6) upper horizontal 230 mm 7.5 kW 7) lower horizontal 230 mm 5.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the required dimension (ATS) - Motor: 2 x 0.37 kW - Spindle diameter: 40 mm - All spindles equipped with a brake Top feed: - 8 feed-in rollers, toothed, metal, including 2 double rollers - 3 feed-out rollers, rubber, double Bottom feed: - Feed-in roller, toothed, driven, pivoting - 3 feed-out rollers, driven, metal, smooth - Rollers pneumatically loaded - Infeed table length: 2480 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed by Cardan shafts - Extraction nozzle diameter: 7 x 125 mm - Dimensions (L/W/H): 5520 x 1930 x 1900 mm - Weight approx. 4000 kg Nwjdpfeyh Ny Ssx Adbec ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry timber – With ATS – Original DTR + CE documentation – Unrepainted – Used planer, in excellent condition Original photos Net price: 169,900 PLN Net price: 40,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm Nsdpfjx Syblex Adbswc From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood Njdpox S Ngkjfx Adbjwc – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW Nodpfoyh Nxnjx Adbjwc 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Catalog number: 7888 TECHNICAL DATA Max. planing width: 410 mm Max. thickness of workpiece (double-sided): 200 mm Max. thickness of workpiece on side heads (four-sided): 140 mm – Top: Kickback fingers / anti-kickback devices 2 pull-in feed rollers, geared, spiral 2 rows of segmented pressure rollers Geared, spiral feed roller Pressure system 410 mm planing shaft, 4-knife – 5.5 kW Pressure system Smooth, outfeed feed roller – Bottom: Nwjdpfjyh Nnvex Adbsc Guide rail – present Adjustable infeed table with sliding roller 410 mm planing shaft, 4-knife – 4 kW 2 smooth sliding rollers – Rear: 2 side spindles 1) Right vertical 140 mm – 3 kW 2) Left vertical 140 mm – 3 kW Spindle diameter: 35 mm Spindles adjustable up/down and right/left Spindles positioned alternately 6 feed speeds Dust extraction outlet diameters: 2x100 mm, 1x150 mm, 1x170 mm Dimensions (L/W/H): 2170 x 1300 x 1260 mm Weight: 1603 kg ADVANTAGES – Suitable for wet and dry timber – Ideal for processing beams, flooring, etc. – Made by the German brand BAUERLE – Used planer, in very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7679 Nodpfoyh H Hcsx Adbswc TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Table lenght 2000 mm. Workingwidth: max. 230 mm / min. 18 mm. Workingheight: max. 150 mm / min. 8 mm el height adjustable Speed 7-36 m/min. 3,7 kw motor, cardan Nsdpfx Asxr U Azsdbowc 5 pcs. Ø 40 mm. spindels: b + r + l + t + b (specifikations see file attached Siemens touchscreen see all technical features attached file

Condition: used, Year of construction: 2018, Cantilever rack, heavy duty rack Nsdpfxeryx Tzo Adbewc -Manufacturer: Gemac, cantilever rack base field double-sided -Cantilevers: 5 per side -Compartment height: 33 cm -perm. Load: 200 kg per cantilever arm / 1000 kg total. see nameplate -Quantity: 12x shelves available -Price per piece -Dimension: 1315/1210/H2000 mm -Weight: 98 kg/piece

Condition: good (used), Year of construction: 1998, Cantilever rack, heavy-duty rack -Manufacturer: LBE, cantilever rack base field double-sided Nwodpstrzpwjfx Adbec -Cantilever arms: 5 levels per side, length 500 mm -Compartment height: variably adjustable -Load capacity: 1-sided 630 kg, see photos type plate -Quantity: 1x shelf available -Dimensions: 1300/1180/H1985 mm -Weight: 80 kg

Condition: good (used), Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm Nedpfsr Ngpxjx Adbswc -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg

Condition: good (used), Cantilever racking, heavy-duty racking -without insert trays: none available -Double-sided -consisting of: Nwjdpfx Adecn Am Isbsc -Shelf: with 3 uprights each, height 5.4 m -Support arms, double-sided: 500 mm long -Brack load capacity: 795 kg -Load capacity per side: max. 7000 kg -screwed -Number: 4 shelves available -Price: per piece -Empty weight: 1250 kg/piece

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Njdpox Ifdkofx Adbowc Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Njdpex Iugusfx Adbswc Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Nwodoyi Eaajpfx Adboc Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Nsdpfxoyahv So Adbewc Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.