Used Double Belt Grinding Machine for sale (92,491)

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery Gijdsxq Hkuopfx Admel if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: new, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment Gjdpfxoxaaxqo Admeil - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Gisdpfx Adjxpqy Romjl Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: used, Year of construction: 1992, 920229 grinding band dimension 75 mm x 2000 mm wheel dimensions 250 mm weight 90 kg Gijdpfxjrxg Tqj Admol volt 380 V

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding width: 150 mm, grinding height: 100 mm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, GREIF 7 station flat surface grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations with 4 kW power each, frequency controlled at each station, each station can be swiveled by +-15° for cross grinding, max. grinding width 150 mm, max. grinding height 100 mm, diameter contact disc 200 mm, sanding belt dimensions 150 x 2500 mm, pneumatic belt tension, sanding belt oscillation, machine including return conveyor belt, including paper filter system with 1500 liter capacity. Since the contact wheels are directly driven, this system could also be used for polishing or brushing. Gedpfstq Twvjx Admsil If desired, this system can also be offered completely overhauled.

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for Gjdpfx Adoxab N Djmjil grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Gsdpfx Adjxab Dzemeil Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: used, Year of construction: 2024, tube diameter 16.0 - 90.0 mm width of the strips 100 mm Giodpfxsxab Dns Admsl band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm The TUGRA TT 90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - easy manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 72.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button Gijdpfxjxab Ako Admjl - Machine base

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : Godpfx Adjxabtiomsil - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 Godpfx Adoxabtcomsil - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Gijdexabp Dopfx Admsl Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed Gjdpfxjxabkze Admsil - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag Gedpfx Adexabhgemoil

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table Gsdjxabf Ejpfx Admjil - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min engine output 4.0 kW weight 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Giedpfxexaa Swo Admol Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW Godpfx Aexaatujdmeil motor 220 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes Gijdpfexaarqox Admjl - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Gisdpfx Adexaaq Temel Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base Giodoxaapvjpfx Admol - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Gijdpfxexaappe Admjl Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW Gsdpfx Adexaapismoil total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Giedpfsxaanrox Admel Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily Godow U U U Dopfx Admoil - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge

Condition: new, width of the strips 150 mm band length 2280 mm band speed 22 m/sec table-size 700 x 350 mm roll diameter 140 / 80 mm motor speeds: 2880 1/min range L-W-H 1300 x 800 x 1500 mm total power requirement 3,0 kW weight of the machine ca. 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm Gedpfxsppgdzo Admoil - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley