Used Doubel Cluom Milling for sale (9,448)

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm Cgjdpfx Aett Da Iefqjw BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 350 mm, Control system: HEIDENHAIN Table surface: 315 x 710 mm Spindle speed: 50 - 3000 rpm Dimensions L x W x H: 2700 x 2250 x 1950 mm Cedpozfixwofx Afqegw Weight: 1,700 kg

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm Cgedjv Uh Ndepfx Afqjw - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, input voltage: 380 V, We are offering this defective Klopp UW5 CNC tool milling machine, manufactured in 1990, for sale. The spindle of the Z-axis is defective. It was inspected by a technician approximately 5 years ago, and it was determined that a repair would no longer be economically viable. Otherwise, the milling machine was functional. It is explicitly offered as a source of spare parts. The milling machine can be inspected, but it is no longer connected to the power supply. Collection must be arranged by the customer; a 10-ton overhead crane is available. Model designation: UW5/TNC355 Year of manufacture: 5/90 Serial number: 5309 Connection voltage: 380 V Frequency: 50 Hz Rated current: 43 A Cjdozh Takepfx Afqsgw Fuse rating: 50 A Control voltage: 220 V Auxiliary voltage: 24 VDC Wiring diagram: 0552 828 If you have any questions or require further information, please send us a message or call us.

Condition: used, machine/vehicle number: 14016, Rotor diameter: 530 mm Rotor width: 1000 mm Rotor knives: 4 x 2 Stator knives: 2 Cgodpfeyuz Dxox Afqjw Feed opening approx. 700 x 1000 mm Drive motor: 90 kW

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Codpeyr I E Rsfx Afqegw Stator blades: 2 Drive: 5.5 kW

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 310 mm, spindle speed (min.): 60 rpm, spindle speed (max.): 4,200 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,852 mm, chuck outer diameter: 210 mm, total width: 1,722 mm, collet bore: 73 mm, spindle nose: KK6, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is new and has only been used for demonstrations up to now; it has not yet produced any chips. The machine is set up and operational, and can therefore be inspected. Additional options & accessories: - Preparation for a bar feeder. - Tool measuring arm. - Chip conveyor (available upon delivery, not currently included). Csdezcplyopfx Afqjgw - 10 bar high-pressure coolant pump. - Rohm KFD-HE 210/3-KK6 3-jaw chuck. - Approx. 9 VDI-30 tool holders (7 static, 2 powered).

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min Cedpfx Afjy S Tm Usqogw drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: like new (used), Year of construction: 2012, functionality: fully functional, turning height: 8,000 mm, workpiece weight (max.): 350,000 kg, turning diameter: 17,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 4,000 mm, faceplate diameter: 10,000 mm, rotary table diameter: 10,000 mm, rotational speed (max.): 35 rpm, rotational speed (min.): 2 rpm, spindle speed (max.): 3,000 rpm, table load: 350,000 kg, table diameter: 10,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 4,000 mm, warranty duration: 12 months, workpiece diameter (max.): 17,000 mm, Equipment: documentation/manual, Huge 5 axis vertical turning centre. Never used. A magnificent machine tool Cjdjy Uvzmepfx Afqsgw

Condition: ready for operation (used), Year of construction: 1990, Available immediately from our location: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel distances X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Cjdezizgnjpfx Afqsgw Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: EUR 1,800.00 (plus VAT, ex location)

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, STARVISION DH 2012 Portal Milling Machine – available for short-term delivery The STARVISION DH 2012 is a high-precision portal milling machine for machining large and heavy workpieces. Ideal for mold making, mechanical engineering, or contract manufacturing, as well as for demanding machining tasks with high requirements for stability, dynamics, and accuracy. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease purchase possible ✔ High rigidity for heavy machining ✔ 24 months warranty Why STARVISION: STARVISION stands for modern portal milling machines with high precision and efficient machining. Thanks to its stable portal design, powerful drives, and high-quality components, the machine is ideally suited for demanding applications. Technical features: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool changer: 60-position chain magazine with dual gripper Chip removal: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure, closed at the top Accuracy: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Cjdoq Ixc Topfx Afqogw Your advantages as a JMT customer: ✔ Official sales partner in Germany ✔ Technical support and on-site service ✔ Fast supply of spare parts ✔ Training and instruction included

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN MM 6 Traveling Column Milling Machine The LAGUN MM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing possible ✔ High flexibility thanks to the traveling column concept ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of milling machines. The machines are convincing due to their reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN TFT displays 24" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Automatic tool changer (ATC), 60-position Chip removal: Hinged belt conveyor Enclosure: Cgodpfx Afjhy Au Ieqjw Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: used, Year of construction: 2022, x-travel 5.230 mm y-travel 2.750 mm z-travel 1.100 mm control Heidenhain TNC 640 Tool bore DIN69871 A50 BIG PLUS main drive 32/43 kW torque S1/S6-60% 752/1.011 Nm speeds Spindel stufenlos 6.000 U/min ca. 70 kw weight of the machine ca. ca. 43 t Installation dimensions (length x width x height) ca. 12,2 x 5,7 x 5,1 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Heidenhain TNC640 control system with HR510 handwheel and digital drives - 60-station tool changer - Internal coolant supply (ICS) for vertical spindle with 1000L tank and automatic water/air switching - Direct axis measurement via Heidenhain linear scales - Coolant system with paper belt filter and magnetic separator - Automatic central lubrication - Rigid tapping (threading without compensating holder) - Oil-cooled ball screw (internal) in the X-axis - Spindle oil cooler - Automatic machine shut-off - Screw-type chip conveyors on both sides of the table - Hinged-belt cross chip conveyor Cedpjzgxgmjfx Afqegw Accessories, pictured tools, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, Year of construction: 2017, x-travel 800 mm y-travel 500 mm z-travel 600 mm Cgjdpszgxggjfx Afqow control Fanuc Series Oi-MF spindle tunring speed 15.000 U/min table-size 800x560 mm gleichmäßig verteilt bis zu 600 kg tool taper SK40 tool changer: 32-fach output 35 KVA weight of the machine ca. ca.11t + Wechsler ca.8t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Robust vertical moving-column machining center with a fixed table, designed for precision and stability when machining heavy workpieces. Technical features & accessories: - Tool changer - Through-spindle coolant (TSC) - Swiveling pallet changer / 2-pallet machining system - Coolant system - Chip conveyor Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, Year of construction: 2015, x-travel 1200 mm y-travel 600 mm z-travel 600 mm control Dahlih-FANUC Solution C Csdezgxgaepfx Afqsgw spindle tunring speed 15.000 U/min tool changer: 40-fach tool taper SK40 table-size 1.300 x 640 mm output 35 KVA weight of the machine ca. ca. 7.500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. A robust vertical CNC machining center designed for the precision machining of steel, cast iron, and molds. It is characterized by high rigidity and flexibility. Technical features & accessories: - Lehmann 4th axis with tilting bridge and grid clamping table / tilting rotary table - 2x machine vises - Handwheel - Tool changer - Through-spindle coolant (TSC) - Coolant system - Chip conveyor Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping devices, clamping supports, clamping tool, clamping box, clamping tower -Clamping block: for workpiece clamping -Width: 700 mm -Length: 107 mm -Height: 440 mm -Threaded holes: M24 -Bores diameter: mm -Number: 2x milling support available Cedpfx Afscn Ibgoqjgw -Price: per piece -Weight: 235 kg/piece

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 13 pieces -Type: various designs, see photos -Price/Fee: complete Cgjdpfx Aezdyp Refqow -Transport dimensions: 400/400/H80 mm -Total weight: 24.5 kg

Condition: good (used), Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling chuck: MK4 chuck Cgodpfx Afozdyn Tsqew -Shaft: Ø 27 mm -Shaft length: 520 mm -Dimensions: Ø 44 x 665 mm -Weight: 5.6 kg

Condition: excellent (used), Year of construction: 1995, total height: 600 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 200 kg, Seperate coolant and frequency converter Last service & Test Log in 2018 Run out in 1 uM Spindle speeds:50000Rpm Spindle Taper:50ISO/Bt/Mk Length: 1200mm Width: 800mm Height: 600mm Cgsdpfjzcxy Hsx Afqsw Weight: 200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 14084, 14085, 14086, Rotor diameter: 180 mm Rotor width: 180 mm Rotor knives: 18 Cjdpfxezg Rb Ae Afqegw Stator knives: 2 Feed opening approx. 180 x 180 mm Drive motor: 3 kW

Condition: used, Used machine Equipment and technical data: Mortise milling unit Boring tool for hinge holes Rabbet cutter Cgsdewhuk Tspfx Afqsw Including accessories Motor: 1.7 kW 2800 rpm Location: Flörsheim Availability: short notice

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Cgedpfx Ajx N Dhdefqew Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Save working time with recallable tools; once set up, the drive unit can be brought back to the preset position with a single movement Mobile and flexible in use; beveling, grooving, flush milling Addition to table and CNC milling machines Table size 520 x 430 mm with fine adjustment #10450 Availability: short-term Cjdpfx Afjw I Upzoqsgw Storage location: Flörsheim

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Equipment and technical data: Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm The machine does not have a motor brake and can therefore only be sold as a source of spare parts! Csdpfxjw I Urio Afqjgw Availability: Short-term Location: Flörsheim

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine will be completely overhauled Equipment and technical data: Cgjdpfx Afewka Sbeqjw Table size: 1100 x 880 mm Pole-changeable drive motor: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Manual height adjustment: via handwheel Manual tilt adjustment: via handwheel Height adjustment of milling spindle: 110 mm Tilt adjustment of milling spindle: -5° to 45°; double-sided bearing Reversing switch for clockwise and counterclockwise rotation With 3-roller power feed unit Images show the machine in non-overhauled condition. Sale does not include Aigner table extensions visible in the images. Availability: by arrangement Location: Flörsheim