Used Dosing for sale (1,143)

Condition: excellent (used), Height of side extension boards: 750 mm Length: 4900 mm Kedpfxoy Ivfre Ablslt Discharge height: 1400 mm Loading height: 157 cm The machine is in good working condition and ready for operation, made of stainless steel (Inox). Please see my other listings as well.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor Kedjyfm Epspfx Ablelt The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Condition: used, Year of construction: 2015, Manufacturer: Packinov Model: 1015 D Year : 2015 Type: Semi-automatic electric dosing machine Volume digitally adjustable Dosage cylinder available: 2 blocks, max. 85 ml. 3 x hoppers, 1 of which is double-jacketed Mixer for hopper Temperature controller Foot-operated actionner Control panel Height-adjustable frame Kjdsx R Dhyepfx Ablolt Machine dimensions: 110 x 100 x 190 cm

Condition: used, Year of construction: 1994, Dosing pump 2 heads Year : 1994 Ideal for corrosive products Large batches of spare parts Klodox Rz Siopfx Ablst Motor EX

Condition: used, Year of construction: 2000, Manufacturer: Atoma Model: 823-C-400 Year: 2000   Number of weighing channels: 3 Maximum weight: 400 g Margin of error (e): 0.5 g   Feeding by hopper and vibrating lane. Ksdpfx Abex Rz Hgelolt Conveyor belt Product stop by cell  

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Kljdpfx Abjl Hx Rdelot

Condition: used, Year of construction: 2021, Overview  This inline dosing system was manufactured in 2021 by AGATHA (Italy). The AGATHA PRO is a compact automatic unit for precise dosing of liquid stabilizers such as Gomasol and Estabicel in wine production. It can be integrated directly into bottling or filtration lines and ensures accurate, homogeneous dosing through its flow-controlled injection system. The machine is in good condition and ready for use. Technical data  Application: Dosing of liquid stabilizers in winemaking Structure: Stainless steel AISI 304 Dimensions (L × W × H): 160 × 60 × 80 cm Weight: 140 kg Control: Touchscreen with dosing software Power Supply: 230 V, ≈500 W Features: Flow sensors, alarms, IP65 protection, easy line integration Klsdpjyb Tafefx Abljt

Year of construction: 1999, condition: used, We have two units available Kedpfxoyvixbo Abljlt Name: Polymer dosing system for liquid Manufacturer: Reiflock Type: Reifomat 500 Year built: 1999 Performance: Polymer throughput: 0,12 - 2,5 l / min. Water flow: 40 - 160 l/min. Dimensions: L 1000 x W 750 x H 1500 mm Empty weight: Approx. 120 kg Technical doc.: yes Condition: Second hand Price: On demand

Condition: used, For sale: Ksdpsy Hi Ecsfx Abljlt BIELAWA filling doser Net price: 900 EUR Negotiable

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). Klsdpfsibx S Njx Ablst St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Kjdpfx Aeu D E A Dsblelt Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Klodpfx Aoyt N A Hjblst

Condition: used, AZO vacuum system with dosing screw Screw type: DFS 155x550 NE320 A22R Separator type: PKS 320-50 M A23R Year of manufacture: 2004 Equipped with quick cleaning system on dosing screw Klodsygh Emspfx Ablet Equipped with various pneumatic valves and accessories for vacuum conveying See our other listings VMA Wekerom

Condition: used, Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg Kedpfxst Ulumo Abljlt

Condition: good (used), Dosing pump, 2-component dosing pump -for dosing liquid media -2x dosing capacity 0-300 l/h -Pressure: 3 bar -Drive: 0.37 kW/57 rpm -Quantity: 1 piece available -Dimensions: 830/400/H340 mm -Weight: 125 kg Kljdpfxjb A Rats Ablst

Condition: used, dosing pump, piston pump, diaphragm pump Kedpfxou Huu Us Ablelt -Manufacturer: Preci-Pompe, dosing pump with stainless steel container -Type: PP 31 -Motor: VEM 0.55 kW -Individual components: see photos -Dimensions: 680/440/H620 mm -Total weight: 87 kg

Condition: good (used), Dosing pump, 2-component dosing pump -For dosing liquid media Klsdpob A S N Tefx Abljt -Dosing rate: 1.4 l/h -Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

Condition: used, Filling system, filling machine, filling station, table filling machine, filling machine, liquid filling machine, filler, dosing computer terminal -Manufacturer: Hilger u. Kern Dopag, dosing computer terminal -Type: ZM 9310-1-0 -Voltage: 230V 50Hz 1A -Connection cable: see photos -Dimensions: 535/330/H170mm -Weight: 9.6 kg Klsdpfx Abeumpnbjljt

Condition: used, Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm Kjdpfx Asdntftjblolt -Weight: 0.3 kg

Year of construction: 2003, condition: good (used), functionality: fully functional, Platform with dual dispensing units. - Electrical cabinet - suction - differential pressure gauge - safety - non-slip floor Kjdpfxeudwl Uj Abljlt

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. Klsdpfsrdyb Ajx Ablet The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Dosing/filling line The dosing/filling line consists of: Klsdpfx Abowaty Rslst 1. Product pump with inlet hopper Brand Rademaker B.V. Dimensions: 1700 mm x 1100 mm x 2250 mm 2. Dosing unit Dimensions: 1700 mm x 1100 mm x 2250 mm 3, Conveyor belt Brand Meyer Plastic mesh belt Belt width: 910 mm Overall dimensions: 3400 mm x 1500 mm x 1690 mm Including trolley with additional parts.

Year of construction: 2020, condition: like new (used), functionality: fully functional, machine/vehicle number: 7523/OC6199, Equipment: CE marking, Complete cement dosing silo with cement screw conveyor and control panel. The unit has operated for 10 hours. Hour counter on the control panel. Technical manual available. Ksdoyrywljpfx Abljlt

Condition: like new (used), functionality: fully functional, machine/vehicle number: Drop 31, input voltage: 380 V, year of last overhaul: 2022, inner dimension length: 250 mm, inner dimension width: 250 mm, Good as new lock inlet square 250x250 Kedpfxeuigtrs Abljlt sheets 10mm thick completely stainless steel motor 0.55 kw 17 rpm maintained annually 5 pieces available

Condition: new, Year of construction: 2023, machine/vehicle number: U-231811/2, 1x VDL HT350 rotary valve without drive (with drive available at extra cost). Kodpfx Aevpg Axoblelt These are new and have never been used; manuals and flange gasket are included as new. The valves are supplied without drive. Size: DN350 Housing: Painted cast iron Rotor: Stainless steel with rubber blades Bearings: External slide bearings At 100% fill, 10 liters per revolution.