Used Dosing for sale (1,129)

Condition: good (used), Dosing installation bag emptying machine with dosing screw Stainless steel discharge cabinet Stainless steel dosing screw with movable bottom and pneumatic end valve Filter unit for dust extraction during refilling Todpfx Aowyf U Tshujf VMA Wekerom See our other advertisements

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned Tsdsibx S Njpfx Ahuef - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Year of construction: 2010, condition: used, Dosing system, dosing device, dispenser for dosing system, dosing machine, paint mixing system Todpfsu Huvlox Ahuef -Manufacturer: FAST

Year of construction: 1998, condition: used, Name: Dosing System For Polymers Manufacturer: PRO-ENTEC Type: RM2 Year built: 1998 Conveying / dosing of: Liquid polymer Performance: 2 - 30 L/h Control: Yes Dimensions: L 1.150 x W 600 x H 1.600 mm Empty weight: 100 kg Technical doc.: No Condition: Second hand Price: On demand Tsdpfexa Atqsx Ahusf

Condition: new, DOPAG Micromix Tedoxcgpzspfx Ahuof The devices in the micromix series are solvent-free, compact, pneumatically driven dosing and mixing units with piston pumps. They are used for processing multi-component, low- to high-viscosity media based on, for example, epoxy, polyurethane, and silicone, with a mixing ratio from 100:100 to 100:4 in spray or continuous flow operation. The materials can be both abrasive and filled.

Year of construction: 2020, condition: excellent (used), cistern with conveyor in it with in front a dosing auger Todpfx Ahsilqfqoujf length 9 meters width 2 meters

Condition: good (used), Stainless steel vibrating chute conveyor with dosing unit Including storage hopper Entirely made of stainless steel Tsdpfjwyf Rnox Ahujf With stairs for refilling the hopper See our other listings

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Tjdpfou D E A Djx Ahuof Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Filler, dosing computer terminal, dosing device, doser, compressed air vacuum control Tedpfxet Ulumj Ahuef -Manufacturer: Hamatech, dosing device compressed air vacuum control -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 330/245/H145mm -Weight: 4.8 kg

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, Processing and dosing system for green waste, wood chips and fuel from biomass consisting of: - 2 x feed hopper 1,500 x 8,000 mm, with dosing and equalization stages - Drum screening system 2,300 x 7,000 mm, screening drum 15 mm² - Overband magnetic separator Permanent magnet - Disc separator 1,500 x 4,500 mm, separating cut 15-100 mm² - Elevation, steel construction - Conveyor belts, distribution belts - Switch cabinet with control system Manufacturer: Rudnick & Enners Project no.: AF4 167 C Year of construction: 2015 Operating hours: approx. 11,000 h Location: Hesse (Germany) Availability: August 2024, by arrangement Service details: The system is in very good technical condition. Warranty: The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects Tjdpfxetynfts Ahusf All prices are ex works, net plus VAT, excluding dismantling, packaging, transportation and crane provision! We reserve the right to prior sale, changes and repairs. This overview is for your information only and does not constitute a binding offer.

Year of construction: 2003, condition: good (used), Container for cellulose fiber 3 mc The container is insulated with mineral wool and covered with coated trapezoidal sheets to minimize heat radiation Further details & specifications of the device will follow. Tsdpfxoq E U U To Ahuof Transport can be organized if required. Subject to prior sale & changes. Welcome to Oussman-Machinery If you have any questions or requests, please call us - we will be happy to help you. We speak English, German, Arabic & French.

Condition: ready for operation (used), Year of construction: 2011, Powder feeding cabinet with suction hood and potentially a dust filter, twin screw powder feeder is installed under the cabinet with a level sensor. Tjdpow Dfv Ssfx Ahusf

Year of construction: 2020, condition: good (used), Rotary valve, Comav dosing valve, rotary airlock, drop-through valve Rotor diameter 400 mm Dimensions: see photos Manufacturer: Comav Type: VSD 400 Year of manufacture: 2020 Completely stainless steel Venturi diameter: 100 mm Motor power: 0.75 kW Tsdpfx Ahowyf Nwjuef See our other listings.

Condition: ready for operation (used), A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible. Tjdpew R Uzpsfx Ahusf

Condition: used, dosing pump, piston pump, diaphragm pump -Manufacturer: Preci-Pompe, dosing pump with stainless steel container Tedpeu Huu Uefx Ahuef -Type: PP 31 -Motor: VEM 0.55 kW -Individual components: see photos -Dimensions: 680/440/H620 mm -Total weight: 87 kg

Condition: used, functionality: fully functional, Automatic dosing device for coating the filter plates with dry additive or for applying a filter aid layer. Tjdpfx Aewvh A Eehujf

Condition: excellent (used), 204 USED Automatic micronutrient dosing system with an acid generator. Manufacturers: REIMELT, ISERNHAGER, THORMER. EQUIPMENT: - 6 raw material silos - 6 round raw material dosing silos. - Transport stations - Rye sourdough maker - Wheat sourdough maker - Grain infuser - Dough mixing station - Dough mixing station - Water mixer - Water dosing. 1. Isernhager wheat sourdough maker, capacity 1000 L. IMPORTANT: Equipped with a cooling and heating system. 2. Bread grinder, fermenter for dry bread and stale bread, 3. Device for producing leaven from stale bread, 4. Bread dissolving device ("Brotauflosen"), 5. REIMELT: Automatic dosing of micronutrients, dosing of raw materials, dosing of sugar, salt, flour, dosing of improvers, recipe implementation. EQUIPMENT: - 6 round stainless steel tanks (height 70 cm, diameter 60 cm, capacity: approx. 150 L each), - automation - pneumatics - control - construction EXTERNAL DIMENSIONS (in cm) - 300x300x300 (width, depth, height) REIMELT: EQUIPMENT: - 6 rectangular stainless steel tanks (height 250, width 100, depth 176 each), - 1 stainless steel tank (height 250, width 100, depth 100) - internal dimensions: height 140, width 90, depth 140, - capacity: 1.7 m3. EXTERNAL DIMENSIONS OF THE SET (in cm): - Width: 650, - Depth: 250, - Height: 270. EQUIPMENT: - Automation - Pneumatics - Control Tsdpfx Ahoxpu R Hjuef - Construction Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, 4 never used dosing stations. Todpewvmiwefx Ahuof

Condition: used, Dosing screw, screw conveyor, auxiliary feed screw Material: stainless steel Motor power: 1.5kW 85rpm Tjdpfxowyf Imo Ahuef Inlet dimensions: 770x410mm Screw flight diameter: 220mm VMA Wekerom See our other listings

Condition: used, Filling system, filling machine, filling station, table filling machine, filling machine, liquid filling machine, filler, dosing computer terminal -Manufacturer: Hilger u. Kern Dopag, dosing computer terminal -Type: ZM 9310-1-0 -Voltage: 230V 50Hz 1A -Connection cable: see photos -Dimensions: 535/330/H170mm -Weight: 9.6 kg Tjdpfsumpnbsx Ahuof

Condition: good (used), K-Tron dosing machine, dosing screw, weighing filler, dosing unit Type: T-35 Incl. scale with control system and display (functionality unknown) See our other advertisements VMA Wekerom Todpswyf Iajfx Ahuef

Condition: used, Dosing pump, 2-component dosing pump Tsdpjb A S N Tofx Ahujf -For dosing liquid media -Dosing rate: 1.4 l/h -Pressure: 10 bar -electr. Connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

Condition: good (used), Stainless steel screw conveyor feeder screw feeder screw filling screw big bags Tedowyf Efopfx Ahuof Diameter screw conveyor 170mm Length screw conveyor 1900mm Outlet 170mm See our other advertisements VMA Wekerom

Condition: used, Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg Tedpfjdntftsx Ahusf

Condition: used, Perschroef dosing screw dosing machine All stainless steel Motor power 1.1kW 9.7rpm Diameter screw 150mm Mobile Connection DN100 Tjdowyfxrspfx Ahujf See our other advertisements VMA Wekerom