Used Doosan Dl 450 for sale (289)

Condition: used, Year of construction: 2014, 2014 Doosan DX140LCR-3 Ljdpsy Rlxyjfx An Usab 2014 Doosan DX140LCR-3 700mm Pads, CV, QH, Piped, Aux. Piping, Bucket, Rear View Camera, A/C

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Laodpoy R S Uzsfx An Ueb Spindle bore 80 mm (main spindle); All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. An automatic door can be retrofitted for this purpose. In Germany, complete commissioning upon request. All at additional cost!

Condition: excellent (used), power: 124 kW (168.59 HP), operation weight: 22,100 kg, chain condition: 70 %, Year of construction: 2019, operating hours: 10,131 h, Equipment: air conditioning, cabin, Doosan DX225LC-5 Year: 2019 Operation hours: 10.131 hrs. ROPS Protection Cabine Airco Radio Back drive camera Central lubrication Laedpfey T Hy Rex An Ueb Monoboom Stick: 2,90 m. All hydr. lines (hammer-, gripper-, scissor line) quick coupler OQ70/55 1x bucket – 700mm width u/c: approx. 60-70% good trackshoes: 600 mm width engine with 124kW CE Operation weight: 22.1 to

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Ledpfsv Iq Ezsx An Ueab Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2023, machine/vehicle number: IntNr231501, CNC Lathe – DN Solutions (Doosan) LEO 1600 Year of manufacture: 2023 Equipment / Highlights - Horizontal CNC lathe - High-performance main spindle - Robust machine construction for precise dimensional accuracy - Tool turret with rapid indexing - Compact design, minimal footprint - User-friendly CNC control - High reliability and low maintenance requirements Technical Data - Max. turning diameter: approx. 300 mm - Max. turning length: approx. 300 mm - Spindle bore: approx. Ø 52 mm - Main spindle speed: up to approx. 4,500 rpm - Tool turret: 12 stations - Control: FANUC CNC - Machine weight: approx. 2,200 kg The machine is fully operational, both electrically and mechanically. Laedpfxoy Rftwe An Ujb Comprehensive technical documentation available. The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change or error.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE Lodpfey Tzcyex An Usab - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 762 x 516 x 570 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 36 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 - Tool exchange time : 1,3 [sec] PALLET CHANGER - Pallet size : 860 x 570 [mm] - Pallets number : 2 - Pallet exchange time : 5 [sec] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 40,25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3130x3260 [mm] - Machine height : 3130 [mm] - Machine weight : 9200 [kg] EQUIPMENT - CNC : Fanuc 0i-MD Interface : PCMCIA, RS232 / RJ45 - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor - Electric transformer

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,000 h, overall weight: 3,900 kg, controller manufacturer: FANUC, controller model: 0i-TD, number of axes: 4, This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Internal machining adapter/shell kit • Preciflex active holder additional adapter set • A set of little used tool set is available for an additional price. Technical Machine Benefits • External turning tool holder • Double external turning tool holder (left side) • Double external turning tool holder (left side) • End surface treatment holder • Internal machining holder • Double external turning tool holder (both sides) • Triple internal machining holder • Axial active tool holder (left side) • Axial active tool holder (left side) • Radial active tool holder Extra Information Machine still under power Ledpfxjx D I T Rj An Ueab

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm Laedpsx D H Aqofx An Usb • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,500 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 1,130 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 21i-T, number of axes: 2, Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details. • Condition: Fully functional, ready for demonstration; machine still under power; enhanced operational efficiency and precision • Capacities: max workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width across saddle slideway 280 mm • Spindle: nose ASA A2-8; spindle hole taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearings: roller/angular + thrust; speed override 50–150; motor AC 18.5/22 kW (continuous/30 min) • Turret/tooling: V12 turret; standard tool shank 25 mm; max boring bar Ø50 mm • Axes: rapid traverse rate X: 20, Z: 24 (units as provided) • Control/electrics: NC unit F-21iTB; total power consumption 31 kVA Ledpfx Aey Hrgcen Ueab • Pumps: hydraulic pump motor AC 1.5 – 4P kW; way lubricating pump motor AC 0.02 – 4P kW; coolant pump motor AC 0.4 – 2P • Other features: steady-rest and tailstock move when hooked to the carriage Additional equipment • Programmable tailstock • 12" 3-jaw chuck • Self-centring steady rest SLU 3.1 • Automatic tool measuring arm Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2013, operating hours: 2,990 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: gas, construction height: 2,540 mm, gearing type: automatic, Equipment: cabin, head guard, Doosan G30G. Forklift with a load capacity of 3,000 kg and 2 doors. Unladen weight: 4,600 kg. Lifting height: approx. 4 m. Tow hitch, heater, 2 sliding windows, turn signals, work lights, fork length approx. 1 m, windshield wiper, power steering, suspension seat, reversing alarm, 4-cylinder engine. Ledpfx Ansy S Ng De Ueab Daily purchase of commercial vehicles, trade-ins also possible. Price: €6,900.

Condition: used, lifting height: 4,650 mm, Year of construction: 2016, operating hours: 8,640 h, Year of manufacture: 2016 Empty weight: 8.500 kg Digging depth: 4.175 m = Additional options and accessories = Ledpfx Ansy Nw Abj Ueab - Rubber tracks

Condition: used, Year of construction: 2017, operating hours: 6,650 h, Year of manufacture: 2017 Empty weight: 23.500 kg Dimensions (LxBxH): 898 x 299 x 308 cm Track width: 60 cm Digging depth: 10.795 m = Additional options and accessories = Laedpfey Nwudsx An Usb - Central lubrication

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Weight 22 ton Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Ljdeyrf Tfjpfx An Ueab Machine Weight 21500kg. S/No. P60L0377 (2006)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 2,800 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, spindle motor power: 30,000 W, total height: 1,915 mm, total width: 2,035 mm, overall weight: 5,650 kg, product length (max.): 3,821 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D control touchscreen with ShopTurn 15-inch display • 3-axis CNC horizontal turning machine with driven tools and tailstock • C-axis main spindle: 360° resolution 0.001° • C-axis speed: 200 rpm • C-axis torque: approx. 1162 Nm • Swing diameter over bed: 720 mm • Swing diameter over cross slide: 590 mm • Max turning diameter: 376 mm • Max turning length: 725 mm • Main spindle bore: 115 mm • Bar capacity: 103 mm • Spindle nose: ASA A2-11 • Max torque: approx. 1112 Nm • Rapid traverse X-axis: 24 m/min • Rapid traverse Z-axis: 30 m/min • Feed force X-axis: 9465 N • Feed force Z-axis: 17379 N • Three-jaw power chuck diameter: 305 mm with soft jaws • 12-station tool turret with BMT65P tool holders • Max driven tool speed: 5000 rpm • Driven tool power: approx. 7.7 kW • Driven tool torque: approx. 75 Nm • Tailstock with quill diameter: 100 mm • Quill stroke: 100 mm • Hydraulic clamping system with hollow cylinder • Monoblock cast iron machine bed, Meehanite construction • 30° slant bed design • Hardened and ground guideways with low-friction coating • Automatic central lubrication • Coolant system: 7 bar pressure • Coolant tank capacity: approx. 235 liters • Hydraulic tank: approx. 20 liters • Full enclosure with working area lighting • Bar feeder interface • Oil skimmer • Electronic safety clutch for X and Z axes • Electrical connection: 400 V, 3-phase, 50 Hz • Total power: approx. 47 kVA • Unused (like new) Additional equipment Ledpfxjy E I Hie An Ujab • OPTIONAL: HALTER LoadAssistant Universal Big 70 (robot) • Gripper for Doosan Universal Big 70 • Turning station • Workpiece support • Base plate 23 mm / 175 mm Big 70 • Machine interface box Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles Lsdpfx Aey E Izaon Ujab • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW • Torque approx 118 Nm • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA • Machine was never used (like new) Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Lsdoy Epi Aepfx An Usab Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Parts handling arm (for sub-spindle unloading) • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2008, swing over bed 700mm, max dia. 550mm, max length 2093mm, spindle speed 2,000rpm, 10 station turret, Fanuc 21i TB control Lajdpfx Anjypb Nqo Uob tailstock,3 jaw chuck, tool presetter, fixed steady,swarf conveyor

Condition: ready for operation (used), Year of construction: 2021, load capacity: 10 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis DOOSAN M1013 collaborative robot was manufactured in 2021. It features a payload capacity of 10 kg and a reach of 1,300 mm, making it suitable for various applications. The machine includes a stable construction with an aluminum plate and a rotary table for enhanced functionality. If you are looking to get high-quality automation capabilities, consider the DOOSAN M1013 collaborative robot we have for sale. Contact us for further details. • Total dimensions: 1,790 x 1,100 x 900 mm • Documentation: Complete documentation, risk assessment, and CE conformity declaration included Additional equipment • Machine table: Stable construction with 20 mm aluminum plate (840 x 700 mm) • Additional pallet: 400 x 700 mm support surface • Storage system: Rotary table with automatically rotatable hole-pattern plate (28 mm pitch) Laodpfxoy D S S Ts An Uob • Gripper: Pneumatic double-parallel gripper with quick-change jaws • Insertion aid: Spring-loaded compensating adapter (21 N) for raw part placement • Controller housing: EPS-Case IP54 for robot controller, pneumatic valves, and I/O modules • Construction: Open Item profiles with external T-slots for modular expansion • Electrical/pneumatic: 24-pin Harting plug set, pneumatic connection, ready to plug in • Included accessories: 100 cylinder pins (12 x 120 mm), 5 sets of gripper finger blanks, blow-out nozzle, hose guide, tablet holder, splash guard

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Coolant through spindle Ledpfey Hqyhsx An Uoab Misc. accessories MARCELS MASCHINEN CH

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER Laodpfjy Tvbkex An Ueb YEAR OF MANUFACTURE: 2019 CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 687 h, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm. Lodpfx Asx Scplen Ueab

Condition: used, power: 124 kW (168.59 HP), Year of construction: 2015, operating hours: 9,652 h, Empty weight: 21.900 kg Lsdpfx Ansy Nmrre Uoab Please contact Emal Jaweed for more information

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,879 h, Empty weight: 16.500 kg Laodpfx Asy Ivyven Ueb Please contact Emal Jaweed for more information

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, total height: 2,163 mm, total width: 1,945 mm, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,873 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600YB II was manufactured in 2019. It features a maximum turning length of 725 mm and a swing over bed of 780 mm. The machine is equipped with a FANUC i Series controller and includes 12 turret stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600YB II machine we have for sale. Contact us for further details. • Working hours: 4436 h • Parts count: 305 • Swing over bed: 780 mm • Swing over carriage: 630 mm • Max turning length: 725 mm • Bar capacity: 102 mm • Spindle nose: ASA A2#11 • C-axis indexing: 0.001 degrees • Turret stations: 12 • Driven tool speed: 5,000 rpm • Rapid traverse (X/Z): 30 m/min • Tailstock taper: MT#5 Additional equipment • Chip conveyor • Tool setter • Manuals Lsdpfx Ajy A N Dqjn Ueab • CE Declaration Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, functionality: fully functional, machine/vehicle number: 3003, Year of construction: 2015, operating hours: 4,372 h, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, power: 10 kW (13.60 HP), drive type: Elektro, Electric 3-wheel forklift Chassis number: 3003 Laedpfx Ansym Hgvs Ueb Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Super elastic Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire condition: 60 - 80% Battery voltage: 48V Battery type: PzS Side shifter, 3rd valve, rear work lights, front work lights, roof cover, safety light,