Used Doosan Dl 250 for sale (328)

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Ijdpfow Ruyxjx Aacjtn Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300

Condition: excellent (used), Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, Fanuc control, commissioned in 2023, two turrets, all stations driven, Y-axis on upper turret, sub-spindle, parts catcher, Hainbuch chuck, chip conveyor, short bar loader, accessories. Itsdpfxsxnpcuo Aacjn

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany, Wilsdruff 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Iedpfxexmv U Ie Aacjtn 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 4200 mm Measurements height 1750 mm Machine weight 4140 kg Control Unit Brand FANUC Main Drive Spindle speed range 4500 Number of axis 2 Movement X-Axis Movement 205 mm Z-Axis Movement 580 mm Workpiece Isdpfxexg Unyo Aacetn Workpiece drm over bed 550 mm Workpiece drm over support 300 mm Tools Number of station 12 This 2-axis DOOSAN PUMA 240MB was manufactured in 2008. It features a maximum swing over bed of 550 mm, a bar capacity of 65 mm, and a spindle speed up to 4500 rpm. Equipped with a FANUC i-series CNC, 12-station turret with driven tools, and a chip conveyor. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, fuel type: diesel, fuel tank capacity: 78 l, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,970 h, Year of manufacture: 2015 Field of application: Construction Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L Ijdpjxb Ay Hjfx Aacjtn

Condition: excellent (used), Year of construction: 2021, 300mm turning diameter, 510mm turning length, Y axis +/- 52mm, 600mm swing, 65mm bar capacity, 4500rpm, 24 station turret, 12.5kW spindle motor, milling 6000rpm, C axis 0.001 degrees , Fanuc I series control, tailstock, coolant, low volt light, parts conveyor, parts catcher, tool setter, swarf conveyor. Ijdpfx Aasw R T Stecstn

Condition: good (used), Year of construction: 2001, turning length: 580 mm, travel distance X-axis: 205 mm, mount diameter: 12 mm, LNS Barfeeder 1000 mm Tool eye Part chatcher Kitagawa chuck for main & sub spindel Collet device for mail & sub spindel Live driven tooling Max. turning Ø: 290mm X-Axis: 205mm Z-Axis: 580mm Spindle bore: 51mm Speedrange: 4500Rpm Spindle power: 15kW Subspindle speeds:4500Rpm Subspindle bore: 51mm Subspindle power:15kW ATC / revolver: 12 Speed live tools:4500Rpm Power live tools:7.5kW Chip conveyor: Yes Tool eye: Yes Length: 3500mm Width: 2000mm Height: 2300mm Weight: 4200kg Itsdpjxdxc Ajfx Aacon

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,004 h, Drive: Wheel Itjdpfxexgz Ute Aacsn Empty weight: 15.050 kg Serial number: N016 Rental currency: EUR Please contact Jan De Lepeleer for more information

Condition: used, Year of construction: 2020, operating hours: 2,442 h, 2020 | Doosan DX140LCR-5 with PowerTilt OQ65 quickcoupler (without bucket) | Used Tracked Excavator | 2442 hours 📍Location: Germany, München 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 95000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 84 inspection points 80 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ Itjdpjxmlxcsfx Aacon 📌 Inspector's Comment: Condition is good for age, ready to work, but U/C rubber pads are worn and chiped and some other smaller maintenance needed 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "37601 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1700 mm Measurements depth 3280 mm Measurements height 1650 mm Machine weight 3500 kg Control Unit Brand FANUC Model Oi-TC Main Drive Spindle speed range 6000 Number of axis 2 Movement X-Axis Movement 175 mm Z-Axis Movement 550 mm Workpiece Workpiece drm over bed 550 mm Workpiece drm over support 300 mm Ijdpfxoxg Unts Aacetn Turret Rotating tools Yes Tools Number of station 12 Media Chip conveyor Yes This DOOSAN LYNX 220 LMA was manufactured in 2007. A robust horizontal turning machine featuring a maximum swing over bed of 550 mm and a bar capacity of 61 mm. It includes a 12-station turret with driven tools, a spindle speed up to 6000 rpm, and a CNC FANUC Oi-TC. Ideal for precision machining with its comprehensive tooling options and chip conveyor system. Contact us for more information about this machine. Application Types Turning

Condition: used, Serial number: CD6068L19xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20308 Description: We have a  Doosan Ingersoll Rand Compressor for sale. Is a 6 cylinder engine that is in it. The compressor is 16m3. Starts and runs. Ready for delivery Iedpfx Aajwi R Hmecstn

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Itedpfst H Nbusx Aacjn Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: excellent (used), Year of construction: 2012, Offered here is a Doosan Puma TT1800SY-GL CNC lathe including portal loader. The machine is in good condition and can be inspected under power in our warehouse. The scope of delivery includes various static tool holders and 4 driven tool holders. The machine will be loaded free onto truck by overhead crane. Make: Doosan Model: Puma TT 1800SY-GL Control: Fanuc 31i Year of manufacture: 2012 Technical Data: Isdpfx Aexmkfheacetn Turning diameter (lower and upper turret): 230 mm Turning diameter over bed: 230 mm Turning diameter over slide: 230 mm Recommended turning diameter: 210 mm Chuck size (both spindles): 210 mm/ 8 inch Spindle bore: 65 mm Travel: X1-Z1 (upper turret): 165x700 mm X2-Z2 (lower turret): 190x720 mm Y (upper turret): 100 mm A (sub spindle): 770 mm C-axis: 360° (0.001° increment) Feed rates: X1-X2-Z1-Z2: max. 20 m/min Y: 7.5 m/min A: max. 40 m/min Spindle speeds (both spindles): 6000 rpm Spindle power S1: 22/19.6 kW Spindle power S2: 22/18.5 kW Torque (both spindles): 208 Nm Number of tool stations: 24+24 (lower and upper turret) Rotational speed of driven tools: max. 6,000 rpm Torque driven tools: 5.5/2.2 kW (7.4/3.0 kW) Power consumption: 64.86 kVA Dimensions: 3905x2250x2600 mm (machine only) + portal loader

Condition: used, Year of construction: 2004, operating hours: 10,000 h, Doosan PUMA 2000 LSY with bar feeder Year of manufacture/new: 2004 Operating hours: 9,400 Itedpfx Aexizdgjacjn Control: Fanuc 18i-TB Bar feeder: LNS Servo 2 Tool measurement: available Chip conveyor: available Tools: 12 stations Axes X: 250 mm Y: ±50 mm Z: 830 mm B: 830 mm

Condition: used, Year of construction: 2010, Engine Power: 245kw Weight: 47500kg Maximum range: 12.15m Digging depth 7.8m Breaking Strength 30.8 kN Itsdpfouf E Utox Aacjn Engine Manufacturer: Doosan Engine Type: DV11 Demolition Cage: Included

Condition: used, Control – Fanuc 31i Max. turning diameter: 760 mm Max. turning length: 1540 mm Chuck size: 10" inches Bar working diameter: 76 mm Max. spindle speed: 4000 rpm Max. spindle motor power: 26 kW Iodpfx Aasxlbvujcjtn Milling spindle speed: 12,000 rpm Y-axis travel: 230 (±115) mm

Condition: used, Year of construction: 2008, turning diameter 900 mm turning length 1.600 mm control FANUC 21i TB turning diameter over bed 1.030/800 mm bar passage 160 mm Ijdpfxovzhcds Aacetn travel -x axis 450 mm travel -z axis 1.650 mm speed X/Z 12 /16 m/min Machine on 30.337 h Cutting time 16.067 h total power requirement 64,4 kVA weight of the machine ca. 16 t dimensions of the machine ca. 5.760 x 3.145 x 2.780 mm

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, Itsdpfxew Npz Is Aacsn 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 8,935 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light - 360 kW motor - Radio/cd Iedpfx Aevg Nq Heacotn - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Condition: good (used), power: 213 kW (289.60 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 6,306 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: DL08P Empty weight: 36.200 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCECEBEH1020055 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,3x3,5x3,4 Itodpfxsxbba So Aacjn Production country: KR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2014, Engine Power: 209kw Weight: 34980kg Track Width: ~600mm Digging depth 7.3m Demolition Cage: Included Itjdsuf E Uyspfx Aacen

Condition: used, TECHNICAL DETAILS - Number of axes : 2 Isdexcbt Iopfx Aacetn MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 19.781 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Itodpfx Asw I Tnijacon Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] Itjdpfx Asxcbtzsacsn - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.818 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] Ijdpfx Ajxcbtujacstn - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.725 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer