Used Dmg Mori Ecomill 50 for sale (192)

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2, year 2022. Siemens SlimLine control. Travels: X-500 mm, Y-450 mm, Z-400 mm, B -5 / +110°, C 360°. Spindle max 15,000 rpm. Tool magazine for 60 tools, BBT40. Through-spindle cooling 70 bar. Chip conveyor. Filter paper. High-pressure coolant pumps. Workpiece probe, tool probe. Quickset (rotary axis calibration). Machine in very good condition, available at our warehouse in France, 01360 Loyettes. Full specification below in PDF. Kjdpfx Adsxyi Hweyslt

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Kjdpfsy A Icrex Adyslt Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

Condition: excellent (used), Year of construction: 2014, CNC controller: M730BM Capacity Y-axis travel mm: ±50 Turning length mm: 510 Max. turning diameter mm: ø 356 Upper turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 10.000 Main spindle Speed ​​spindle rpm: 5.000 Counter spindle Speed ​​spindle rpm: 6.000 Automation (Gantry Loader System GX-05 AI) GX-05 AI Gantry Loader package (left-side installation, double gripper hand). 14-station integrated workpiece storage. Kjdpfx Aoyn Iatodyelt 20-pallet expanded workpiece storage. Custom gripper jaws for the loader hand. Modified lifting device with sensor and storage mounting device.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 Kljdpfx Asytbqvjdyjt MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Ksdpfeyzxcgox Adyjlt Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: like new (used), Year of construction: 2018, operating hours: 23,501 h, functionality: fully functional, turning diameter over cross slide: 740 mm, turning diameter: 920 mm, spindle motor power: 18 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, milling spindle length: 91 mm, rotational speed (max.): 10,000 rpm, total height: 2,395 mm, total length: 5,330 mm, total width: 4,100 mm, swing diameter over cross slide: 740 mm, spindle nose: JIS A2-8, overall weight: 8,360 kg, CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Kedpfx Ajwkf H Dodyelt Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Mist collector Workarea light Chuck foot switch (double) for main and counter spindle Coolant gun Measuring probe Paper band filter Preparación para trabajar con robot Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Hight 20mm Max. Weight by robot piece: 5,6kg Working time hours Under power: 23.501 Potencial nominal kVA: 48 Cutting Time: 7.494 Basic machine dimensions / weight Length mm: 5.330 Width mm: 4.100 Height mm: 2.395 Weight kg: 8.360

Condition: excellent (used), Year of construction: 2019, operating hours: 9,100 h, functionality: fully functional, We offer you: CNC Turning and Milling Center Manufacturer: DMG Mori Model: NTX 2000/1500 Year of manufacture: 2019 Control: DMG Mori Celos with Fanuc F31iB5, Mapps M730UM Technical Data: Max. turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel paths: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm Main spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Sub spindle: Max. speed: 5,000 rpm Drive power: 15/15/11 kW Spindle bore: Ø 73 mm Torque: 421/302/256 Nm Milling spindle: Speed range: 0 – 20,000 rpm Tool holder: Capto C6 Number of tool stations: 114 positions Feed rates: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min Kedpfoyhdqnjx Adyslt a-axis: 36 m/min b-axis: 100 rpm Through-hole chucking device: Ø 67 mm Operating hours: approx. 9,100 h Spindle hours: approx. 4,600 h Technical features and accessories: - High/low pressure chucking system for main and sub spindle; programmable hydraulic 2-stage chuck pressure control - 8" hollow chuck Ø210 mm, hydraulic 3-jaw chuck Kitagawa BB208A621 on main and sub spindle, incl. hollow clamping cylinder - Dual foot switch with safety cover - B-axis with 0.0001° positioning - Tailstock function for sub spindle - Self-centering hydraulic steady rest, centering diameter 20 – 165 mm, make: SMW SLU-X3.1 - Machine designed for coolant emulsions - Hinged belt chip conveyor - Coolant pistol - Coolant shower at the main and sub spindle chuck - Compressed air blow-off system for main and sub spindle chuck - Coolant supply through the sub spindle - Oil separator as band skimmer - ICS, compact filter system/paper band filter Knoll KF110/700, 70 bar, tank 700 l - Direct position measuring systems - Spindle probe measuring system with wireless signal transmission, Renishaw RMP 60 - Automatic tool setter for turning-milling spindle - EtherNet I/P interface - Electrical I/F for multi-channel bar feeder/loader, terminal block wiring - Air filter unit for drying and oil separation - 10 additional M codes - 95 kVA three-phase autotransformer - 3D quickSET - Pocket and island milling function - Fast fixed cycles - Program restart - Optional skipping of a program block - Workpiece unloader with conveyor belt and collection tray Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data, specifications, and subject to prior sale and errors excepted!

Condition: used, Year of construction: 2022, operating hours: 10,014 h, functionality: fully functional, machine/vehicle number: 00340000910, turning length: 1,290 mm, turning diameter: 640 mm, spindle motor power: 46,000 W, spindle speed (max.): 2,000 rpm, spindle bore: 95 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, workpiece weight (max.): 1,200 kg, feed force X-axis: 9,500 N, feed force Z-axis: 15,500 N, Equipment: documentation/manual, Technical data in the attachment. Kledpfxey Emx Re Adyet

Condition: like new (used), Year of construction: 2013, operating hours: 5,931 h, functionality: fully functional, For sale: Very well-maintained CNC turning-milling center DMG Mori Seiki NLX 2500MC/700, year of manufacture 2013, equipped with a Mitsubishi 730 BM control system. Only about 6,000 operating hours! Technical data: CNC control: MSX-853 MAPPS IV Travel ranges X-axis travel (mm): 260 Z-axis travel (mm): 795 Max. turning diameter (mm): ø366 Max. turning length (mm): 705 Bar capacity diameter (mm): 80 Swing diameter over bed (mm): 787 (interference with front cover: 586) Swing diameter over cross-slide (mm): 541 Rapid traverse X, Z (m/min): 30 Main spindle Max. speed (rpm): 4,500 Drive power (kW): 18.5 / 15 Tailstock Tailstock travel (mm): 734 Quill taper: MT5 Turret Number of tool stations: 12 Driven tool speed (rpm): 6,000 Driven tool motor power (kW): 5.5 Turret indexing time (s): 0.27 Rated power (kVA): 32 Kodpfx Aoyq N E Aodyjlt Footprint / Weight Machine length (mm): 2,053 Machine width (mm): 3,970 Machine height (mm): 1,900 Weight (kg): 6,000

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Klodpfjyz S T Sox Adyjt

Condition: used, Year of construction: 2015, operating hours: 37,735 h, functionality: fully functional, machine/vehicle number: 14595607194, travel distance X-axis: 1,450 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, feed length X-axis: 42 mm, feed length Y-axis: 42 mm, feed length Z-axis: 42 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, nominal power (apparent): 33 kVA, torque: 130 Nm, controller manufacturer: Siemens, controller model: 840D, total height: 2,910 mm, total length: 4,383 mm, total width: 3,395 mm, table load: 2,000 kg, rotary table diameter: 9,900 mm, rotational speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, NO DEALER ENQUIRIES – Dealer enquiries will not be answered! We are offering a DMG MORI DMC 1450 V (vertical machining centre) from our inventory for sale. Condition Fully functional, in ongoing production Demonstration/inspection under power possible Details Operating hours: 37,735 h Machine No.: 14595607194 (nameplate: 4595607194) Factory ID: 3044578 Spindle: up to 10,000 rpm Power supply: 400 V (±10%), 50 Hz, 33 kVA, max. 48 A, fuse protection 50 A Total weight: approx. 9,900 kg Year of manufacture: according to nameplate 2015 (delivery/installation possibly 2017 – refer to documentation) Disassembly/Collection Disassembly/loading and collection by arrangement If you have any questions, require further technical details (control system, tool magazine, ICS, etc.), or would like to arrange a viewing, please send a message. _____ Inventory List – DMG MORI DMC 1450 V Basic Machine Manufacturer: DMG MORI Machine type: Vertical machining centre Model: DMC 1450 V Technical Basic Data X-axis: 1450 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 36 m/min Spindle speed range: 20 – 14,000 rpm Spindle: Inline spindle Power: 14.5 kW / 11.5 kW (40/100% duty cycle) Tool holder: SK40 DIN 69871 Tool clamping: DIN 69872 Tool changer: 20 positions (drum magazine) Kjdjypi Dcepfx Adyelt Table size: 1700 x 750 mm Measuring system: indirect X / Y / Z Control Control: Siemens SINUMERIK 840D solutionline User interface: Sinumerik Operate Control panel: ERGOline control Monitor: 19 inch Options / Equipment Tool magazine extension Chain magazine SK40 Capacity: 60 tool positions including double gripper and mechanical setup aid Touch probe Heidenhain TS 649 DMG Infrared measurement system Direct measuring system for X / Y / Z axes including air purge Coolant/air blow-off switching External via M function Air blow through spindle centre Selectable via M function Filtered air with low oil content Internal coolant supply – Basic Package 3 Rotary union spindle Internal coolant supply Paper band filter 40 bar / 600 l Chip conveyor Bed flushing Enclosure roof Rinsing gun For chip rinsing Oil and emulsion mist separator Mechanical (only with enclosure roof option) Operating mode 4 Process monitoring in production Documentation Machine documentation in German User interface Screen text German/English DMG Netservice Client Remote service Installation on external PC

Condition: excellent (used), Year of construction: 2018, operating hours: 5,500 h, functionality: fully functional, Control SIEMENS 840D SL Shopturn Swing diameter over bed 580 mm Swing diameter over slides 320 mm Max. turning diameter 320 mm X travel 242 mm Y travel +/- 40 mm Z travel 540 mm Distance between centers 780 mm Rapid traverse X/Z 30/36 m/min Rapid traverse Y 22.5 m/min Spindle speed 5000 rpm Spindle nose A2-6 Spindle bore D73 mm Through hole 51 mm Drive power 16.5/11 kW Turntable 12-station (with internal coolant supply) Spindle taper VDI30 C-axis programmable Tailstock sleeve Morse 4 Tailstock travel 550 mm Hydraulic action Power consumption 28 kVA Weight approx. 4400 g kg Dimensions (with chip conveyor) 2800 (3680) x 1780 x 1850 mm Kedpfoyr I A Asx Adyolt Accessories, Equipment - D210 mm SMW hydraulic chuck with 65 mm bore (spindle locked) - Chip conveyor (conveyor belt) - Coolant system - C+Y axes - Integrated tool measuring arm - Tailstock - Manuals

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: Klsdpfjyhwpwsx Adyot - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Klodpfxsw T Sn Ej Adyot Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: used, Year of construction: 2016, BAZ DMC850V, year 2016 CNC milling machine DMG Mori 30-position tool changer DMC850V 3-axis Control type: Sinumerik 840 D Required space: 4x4x2.8 m Table size: 1150 mm x 600 mm Year of manufacture: 2016 Travel paths: X=850 mm, Y=520 mm, Z=475 mm CE certified Kljdsw E Emgjpfx Adyet Operating hours: 16,637 h Spindle hours: 10,477 h CNC

Condition: excellent (used), Working travels 600 x 560 x 510 mm Table size 900 x 560 mm Spindle taper SK40 Spindle speeds 20 -12'000 rpm Tool changer 30 Pos. Control SIEMENS 840D Coolant through spindle Misc. accessories Klsdjvhahrspfx Adyst MARCELS MASCHINEN CH

Condition: used, TECHNICAL DETAILS - Number of axes : 6 Kledpsx H Atysfx Adyet - Number of spindles : 2 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 90 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/795 [mm] - Y stroke : +/-50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41 [kW] MACHINE HOURS - Number of hours under power : 21392.8 [h] - Number of working hours : 13797 [h] EQUIPMENT - CNC : CELOS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS V - 3 colors status lamp - Coolant tank : KNOLL * with high-pressure pump : 70 [bars] * with paper filtering unit - Tailstock option with counterspindle - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICKLOAD - Electric transformer - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Collet chuck

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Kljdpfeyap Shox Adyjt Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: excellent (used), Year of construction: 2018, Tool holder VDI 30 Tool turret with 12 stations Main spindle speed: 5,000 rpm Drive power: 16.5 kW Klsdpex Nnbhofx Adyjt Including bar feeder Including documentation

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h Kledpfxjwvr Tns Adyst

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Kledpfsylpf Sjx Adyot Rapid traverse 42 m/min Spindle speed range 20 to 14,000 rpm Inline spindle with power 20.3 kW / 14.5 kW (40/100% load) Tool taper SK40 DIN69871 Tool shank according to DIN69872 Tool changer with 20-position SK40 magazine (disc with tool holder in bushing and double gripper) Table clamping area 1,760 x 750 mm Direct position measuring in X, Y, Z axes Machine is connected, can be tested.

Condition: used, Year of construction: 2020, operating hours: 13,641 h, machine/vehicle number: 00820028701, Catalog No.: 2.3, as a twin-spindle machine, with SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% duty cycle), largest turning diameter: 360 mm, largest turning length: 800 mm, bar passage: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine slots, Y-axis travel: +/- 100 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: counter-spindle with tailstock function, groove stop function, connection to a central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Kledpfey T Nxcox Adyst

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Kjdpfx Adoyztyajyelt Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,500 rpm, overall weight: 6,000 kg, bar diameter (max.): 42 mm, travel distance X-axis: 50 mm, controller manufacturer: MITSUBISHI, controller model: M730UM, number of axes: 10, This 10-axis DMG MORI Sprint 42/10 linear was manufactured in 2021. It features a maximum spindle speed of 6500 1/min and includes a high-pressure cooling system of 20 bar. The machine is equipped with a bar feeder of 3200 mm length and offers advanced capabilities for precision turning. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 42/10 linear machine we have for sale. Contact us for further details. • Maximum Speed Spindle 1: 6500 1/min • Maximum Speed Spindle 2: 6500 1/min • Electrical Phases: L1,L2,L3,N,PE • Power Consumption: 57 kVA • Maximum Input Current: 82 A • Main Fuse: 100 A • Short Circuit Rating: 5 kA • Maximum Voltage: 440 V • Operating Voltage: 400 V • Voltage Tolerance: ±10% • Frequency: 50 Hz • AC Voltage: 230 V • DC Voltage: 24 V • Counter Spindle Flushing: Included • Counter Spindle Inner Cooling: Included • Main Spindle Inner Cooling: Included • Radial Driven Drilling and Milling Unit for Revolver: Included Klodpfx Adjy T Hzujyjt • Axial Driven Drilling and Milling Unit for Revolver: Included • Angular Adjustable Driven Drilling and Milling Unit: Included • High Pressure Cooling System: 20 bar • Bar Feeder: IEMCA BOSS 552 • Bar Feeder Length: 3200 mm Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Kedpfx Aox Sqptedyelt Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg