Used Disassemble for sale (687)

Condition: ready for operation (used), Year of construction: 1980, An old dosing system from the insolvent manufacturer Tschäppät is available in disassembled condition. Industry: Pharmaceutical, screws: 1, hopper diameter: approx. 220mm. On site inspection is possible. Fsdpfxeyfhl Ro Afnsfu

Condition: used, Year of construction: 2020, machine/vehicle number: LC602, Technical Specifications & Performance Data This used bottling line is a Sidel PET aseptic Blow–Fill–Cap combi configuration engineered for high-speed beverage production. Designed for dry aseptic applications, it delivers consistent performance for sensitive products while maintaining hygienic integrity throughout the process. Manufacturer: Sidel Line type: PET aseptic Blow–Fill–Cap combi Production speed: 48,000 bph Current product: PET bottled water Application: Dry aseptic; suitable for milk and water Available bottle volume: 230 ml (0.23 L) Main equipment year: 2020 (blowing, filling, bottle dryer, etc.) Blower model: Matrix XS P50 (SBO 22/28/26 Matrix XS P50) Filler/Combi model: FMa-COMBI CAPDIS-24k Bottle dryer: 5 sets, includes conveyor Steam generator: Spirax Sarco, 200 kg Air compressor: AF L5S, 35 bar, 220 kW Preform handling: Preform flipping hopper TS21A Waste gas treatment: KYES-13V (blowing), KYES-35L (filling) Containers: PET bottles, cylindrical formats Advanced Automation & Control Systems Ffedpoyin U Tjfx Afneu The Blow–Fill–Cap combi architecture optimizes line efficiency by eliminating intermediate transfers, reducing contamination risk, and enabling synchronized control of blowing, aseptic filling, and capping. The system features integrated controls with centralized HMI for coordinated changeovers and process monitoring. Dry aseptic operation minimizes chemical residues and supports rapid restart with reduced utility consumption. Safety guarding and interlocks protect operators during production and changeovers. Production Line Integration Capabilities This second hand industrial packaging line includes upstream and downstream elements sized for 48,000 bph performance. Integrated conveying links the blower, filler, and bottle dryers, with provision for labeling and packaging downstream. Format changeovers are supported by combi-level integration for rapid switches within the validated range. The line is ideal for beverage production requiring sterile handling, including water and dairy-based products. Inline combi operation with synchronized conveying Bottle dryers (5 sets) for label-ready dryness Compatible with additional downstream packaging solutions Optimized for 0.23 L PET bottles; other formats feasible with appropriate tooling Machine Condition & Maintenance History The equipment is intact and has not been disassembled. It has been operated for about one year, indicating low wear relative to typical lifecycle expectations for this class of bottling equipment. Presented as a used bottling line in sound condition and suitable for recommissioning, it aligns with buyers seeking reliable second hand assets for rapid capacity deployment. Operational Performance & Versatility Engineered for sensitive beverages, this PET aseptic line supports dry aseptic processing with controlled environments from blowing through capping. The configuration is appropri...

Condition: good (used), Year of construction: 1991, Braun Canali band resaw TB 1100 Unimaster Roller diameter 1100mm Ffedpfx Asucnt Hsfnju With swivel table for diagonal cut disassembled from our warehouse in 23936 Grevesmühlen

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table Ffodpfx Aorz Nflsfneu - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: used, Soehnle Scale / Conveyor Technology Scale, Motorized Manufacturer: Soehnle / Overbeck Condition: Good (used) Model: SNR 215158 Overall length: approx. 850 mm Overall width: approx. 850 mm Conveyor width: approx. 440 mm Roller pitch/axle spacing: approx. 75 mm Includes Overbeck roller drive Includes SEW motor Includes height-adjustable feet Scale incl. Overbeck roller conveyor The conveyor system was in operation until disassembly. Condition: fully functional, with signs of use Ideal for fast material handling Internal article no.: 2026012702 Fodpfjyff Ensx Afnefu Professionally disassembled and packed Thanks to the excellent construction of the conveyor system, your material glides smoothly to its destination even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We would be glad to provide you with an individual quote or advise you on concept planning or installation questions. Just let us know your requirements and local conditions. Benefit from our many years of experience and our outstanding network of specialists. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, crafts, or the electronics sector. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can even offer you fully automated sorting systems or complementary components such as picking shelves or containers.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg Ffedpslbgfcofx Afnju POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, Material: stainless steel Double screw: 2 nylon brushes in two sections: Ø 200 mm x 3000 mm Quick disassembly Mounted on a mobile frame: 4 wheels Power: 0,55 kw Speed controller : mechanical Support for feeders and dosing systems Overall dimensions 3800 x 550 x 1700 Fodpfx Afex Rz N Isnefu

Condition: excellent (used), Year of construction: 2013, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 58 shelves, this results in a total storage area of ​​204.74 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 29,000 kg for all 58 shelves. Manufacturer: Modula Year of manufacture: 2013 Model: Modula Lift ML 50D Height: 7350 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Ffedpfx Afox Ezxloneu Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 58 Product video Product video 2 Datasheet: see Documents tab Item location: 18069 Rostock Disassembly and removal by buyer Disassembly by our assembly team is also possible (€5,000 net) More items – new and used – can be found in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: Fedpsx Dnb Uefx Afnefu • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Roller conveyor/ Conveyor system/ Conveyor -with drive Condition: Used total length: approx. 10400 mm plant consists of 4 segments segment length: approx. 2600 mm drive type: chain drive total width incl. motor: approx. 1350 mm Total width without motor: approx. 1130 mm Conveyor width between rollers: approx. 900 mm roller width: approx. 1010 mm roller/axle distance: approx. 165 mm roller diameter: approx. 70 mm track height: 100/ 50 mm Material: steel Color: orange Stock: 10,4 meters Price per meter Ffedpfxjpgkk Aj Afnou Conveyor system has run until dismantled. Due to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy load. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 2011, condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Potveer belt conveyor Manufacturer: Potveer b.v Machine No.: 112541 and 112546 Condition: used year of construction: 2011 1x total length: ca. 8900 mm 1x total length: ca. 9630 mm total width incl. motor: approx. 1000 mm total width without motor: ca. 770 mm belt width: approx. 700 mm frame height: approx. 85 mm Color: green Including feet, SEW motor 1,5 KW Stock: 2 pieces Price: per piece Potveer belt conveyor Due to the excellent workmanship of the belt conveyor, your material will glide smoothly to its destination, even under heavy load. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies from a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Ffjdpfxel Skage Afneu Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram Fjdex A U Ncepfx Afnjfu o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, This listing is for a single Pall (Now part of Cytiva) CSUH 040 Feed Retentate The unit is in full working condition and is ready for immediate use Designed for optimum performance and product recovery, Centramate™ TFF cassette holders, part of the Pall filtration portfolio, are available in a variety of sizes to meet your application requirements. These holders support efficient concentration, purification, and buffer exchange of biomolecules, making them ideal for small batch production, process development, and Phase I clinical studies. Identical fluid path lengths ensure precise linear scale-up to larger process systems. Tool-free cassette removal simplifies workflows—no need to disassemble system plumbing. Fedpsxv Dlyefx Afnofu Available in: 316L Stainless Steel (Centramate system) for robust, high-performance applications. Ultra-High Molecular Weight Polyethylene (PE) (Centramate PE system) for a more economical yet durable alternative. A variety of membrane types and screen options are available for system versatility and application-specific performance.

Condition: used, This listing is for a Scotsman AF 80 AS Ice maker The unit is in full working condition and is ready for immediate release. Supplied with water pipe. The Scotsman AF 80 AS Ice Maker is a high-performance, self-contained flake ice machine that excels in producing ice for various applications, ranging from food service to medical and scientific uses. Here’s a detailed overview of its features and benefits: Key Features: - Compact and Stylish Design: Constructed from stainless steel, the AF 80 AS not only looks professional but also ensures durability and easy cleaning, making it ideal for environments like restaurants or laboratories where aesthetics matter. - Electronically Controlled Operation: The machine's electronic control system includes self-diagnostic functions, allowing users to quickly identify any issues, minimizing downtime and enhancing reliability. - Integral Storage Bin: The built-in storage bin can hold up to 25 kg of flake ice, ensuring that you have a ready supply of ice when needed. - Production Capacity: Daily Output: With a capability of producing up to 70 kg of flake ice daily, the AF 80 AS is well-suited for high-demand settings. For instance, a busy seafood restaurant could utilize the flake ice to keep seafood fresh and appealing for customers. - Sanitation System: XSafe Sanitation System: This advanced feature effectively destroys 99% of all known bacteria and viruses, ensuring that the ice produced is not only plentiful but also safe for consumption. This is particularly crucial in medical settings where cleanliness is paramount. Fsdpfjxxyh Ajx Afnofu - Maintenance and Installation: User-Friendly Maintenance: With front panel access, routine maintenance becomes straightforward, allowing for easier cleaning and checks without the need for extensive disassembly.

Condition: used, This listing is for the Sartorius Practum6101-1S Toploading Balance The unit is in full working condition and is ready for immediate use The Practum 6101‑1S is a high‑quality top‑loading laboratory balance manufactured by Sartorius (often distributed by Cole‑Parmer). Here’s a breakdown of its key specifications and features: Technical Specifications Maximum Capacity: 6100 g (6.1 kg) Readability: 0.1 g resolution Ffjdexhfcqopfx Afneu Repeatability: ±0.1 g Linearity: ±0.3 g Stabilization Time: Approximately 1.5 seconds Pan Size: Around 180 mm diameter (7 in) Weigh South Notable Features Touchscreen swipe interface: Intuitive navigation through menus and functions Built-in overload protection: Protects the sensitive weighing cell from excessive loads Supervisor lock: Prevents unintended menu changes or unauthorized adjustments Data interface: Mini‑USB port allows direct communication with PCs or printers, including support for formats like SBI, xBPI, table, or text Multiple weighing applications: General weighing Density determination Percentage weighing Check‑weighing Peak hold Counting Handling unstable conditions Build and Design Durable, easy‑to‑clean housing: Includes a draft shield that can be disassembled for cleaning

Year of construction: 2019, condition: used, This listing is for a Sartorius Practum 6101-1S Balance. The unit is in full working condition and is ready for immediate release. The laboratory balance that enables you to start weighing right! Unmatched reliability attained by the Sartorius weighing technology featuring quality made in Germany. Innovative housing design and rugged weigh cell for easy weighing, whatever you weigh. Outstanding connectivity without the need for any additional software. Just connect the balance to your computer and transfer your data directly to a Microsoft ® Excel spreadsheet, for example. If you need to print your results, the laboratory balance’s automatic detection of the Sartorius standard printer Practum® - the laboratory balance that enables you to start weighing right! Unmatched reliability attained by the Sartorius weighing technology featuring quality made in Germany. Innovative housing design and rugged weigh cell for easy weighing, whatever you weigh. Outstanding connectivity without the need for any additional software. Just connect the balance to your computer and transfer your data directly to a Microsoft® Excel spreadsheet, for example. If you need to print your results, the laboratory balance’s automatic detection of the Sartorius standard printer YDP40 will make it easy. The sturdy draft shield will stand up to daily rigours, even to use by inexperienced operators. Moreover, it can be completely disassembled to conveniently clean the glass parts in a dishwasher. Fsdpfxjxx Ar Ro Afnjfu

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Fodsxv Abtjpfx Afnefu Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: like new (used), Year of construction: 2022, A Manz hot press is for sale. It is disassembled and stored in our warehouse, and can be inspected ready for connection. It was used in aircraft manufacturing. Ffedpfsyhq Adsx Afnju

Condition: used, mileage: 144,000 km, power: 62 kW (84.30 HP), first registration: 11/2014, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 09/2025, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, Year of construction: 2014, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, Engine disassembled. Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Specialty vehicles - Fleets Other: - Various loading options - Registration service - Delivery within Germany possible for an additional charge Viewing is also possible without prior appointment: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Fedpfxev Rrz Ao Afnofu Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Telephone: Email: Further information can be found at We speak German / English / Russian / Italian / French / Spain More Information Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91132846, Year of construction: 2018, operating hours: 8,616 h, The mast will be disassembled by the manufacturer prior to transport. The technical data is based on the original quotation. The seller assumes no liability for its accuracy. TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Mast type: DZ-V mast Ffsdpfxsyaawhj Afnou Lift height: 10,700 mm Height of mast (retracted): 4,100 mm Free lift: 3,456 mm Height of mast (extended): 11,344 mm Fork tilt forward: 2° Fork tilt backward: 5° Fork length: 1,150 mm Fork dimensions: 40 x 120 x 1,150 mm Width between wheel arms/loading platform: 940 mm MACHINE DETAILS Height to top of overhead guard (cab): 2,263 mm Overall width: 1,282 mm Battery voltage: 51.2 V Tyres: Ø 343 x 114 Operating hours: 8,616 h EQUIPMENT ISM Online ETV 216i Drive & liftPLUS equipment package Drive wheel, 140 mm wide Load wheel cover Panorama overhead guard Panorama rear-view mirror Blue floorSPOT lighting M-Device; including 2 adapters Video; video preparation Seat; leather MSG20 with 3-stage heating Voltage converter; 125 W, 48/24 V Battery: Li-Ion 51.2 V 360 Ah Type IM Charger: SLH300 D400 48 V 150 A

Year of construction: 1996, condition: ready for operation (used), This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. See attached PDF for all accessoires. Fedpfxjibatgs Afnefu – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Condition: good (used), Properties: * Turntable 180° from the manufacturer Overbeck Fördertechnik * Color: blue * Material: steel * Condition: fully functional with signs of use * Ideal for fast material transport * Professionally disassembled and packed Dimensions of the turntable: Diameter of the plate: 1250 mm Total width: 1270 mm Height: 1700 mm Fedpfsdidckex Afnefu All specifications are approximate. The system was in operation until dismantling. Driven turntables impress with their space-saving size. This means that they can be planned for a 180° rotation - with virtually no internal radius. Solutions with different infeed angles are also possible. Tailor-made solutions for your intralogistics: We are your competent partner for roller conveyors, belt conveyors, screw conveyors or telescopes for loading and unloading your goods! We will be happy to provide you with an individual quotation or advise you on the design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of sectors, such as logistics, the pharmaceutical industry Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Gemac Normafix shelving rack 2,720 mm - 2 bays 3x frame Height: approx. 2,500 mm Depth: approx. 1,250 mm Ffjdpfxjqqh A Sj Afnsu 14x shelf (two-part) Length: approx. 1,300 mm Depth: approx. 1,200 mm Shelf load per shelf: 120 kg Shelf load per bay: 490 kg Total length: approx. 2,720 mm Total height: approx. 2,500 mm Delivered disassembled. This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will be happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Gemac Normafix shelving rack 5,400 mm - 4 bays 5x frames Height: approx. 2,500 mm Depth: approx. 1,250 mm 28x base Length: approx. 1,300 mm Depth: approx. 1,200 mm Shelf load per shelf: 120 kg Shelf load per bay: 490 kg Total length: approx. 5,400 mm Total height: approx. 2,500 mm Delivered disassembled. This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. Fjdpfx Afoqqh E Honsfu TRANSPORT & ASSEMBLY We will be happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We are constantly offering you interesting used products from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Gemac Normafix shelving 4,060 mm - 3 bays 4x frames Height: approx. 2,500 mm Depth: approx. 1,250 mm Ffjdpfx Afoqqh Ebenju 21x base (divided into two parts) Length: approx. 1,300 mm Depth: approx. 1,200 mm Shelf load per shelf: 120 kg Shelf load per bay: 490 kg Total length: approx. 4,060 mm Total height: approx. 2,500 mm Delivered disassembled. This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.