Used Disassemble for sale (700)

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Bdodpsyylugjfx Acvsa Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, overall weight: 1,300 kg, load capacity: 160 kg, throat depth: 3,500 mm, working height: 2,150 mm, Al-Vac Powerlift. Mobile column jib crane with articulated arm. Mounted on a robust steel base/foot, the crane can be positioned on a flat surface for immediate use. Alternatively, it can be permanently anchored into a concrete floor if required. Bdedpfxoywti Tj Acvea The lifting and lowering function is controlled by simply raising or lowering by hand directly above the hook, making lifting loads of up to 160 kg feel effortless - like lifting by hand. Reach: 3500 mm. The innermost joint of the jib rotates approximately 270 degrees, with the outermost joint offering slightly more rotation, providing full access around the entire column. Load capacity: 160 kg. Lifting height: 2150 mm + 120 mm base. Overall height: 3560 mm + 120 mm base. Height under jib: 3330 mm + 120 mm base. Loading and delivery available for an additional fee. Disassembly for cost-effective transport possible. The crane requires a 230 V power connection and is ready for immediate use. Extremely user-friendly operation. The crane was manufactured in 2010 but is in almost as-new mechanical condition. A comparable new unit costs approximately €26,000 today. A demonstration video can be sent via WhatsApp on request.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Completely overhauled OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – mechanically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent condition both technically and visually. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts were carefully inspected and replaced as necessary, including but not limited to ball rollers and drive spindles. A comprehensive geometric measurement, alignment, and additional verification using a laser measurement system were carried out afterwards. The machine bed as well as the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, have been completely renewed. Additionally, the machine has been completely repainted and is also visually in an extremely well-maintained condition. The generator and control system have been cleaned and technically checked. The generator’s climate control unit has also been cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent extensive EDM testing in accordance with OPS Ingersoll’s quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Manufacturer: Ingersoll (OPS Ingersoll) - Type: Die-sinking EDM machine - Model: OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn fast programming - Powertec Handheld – multifunctional manual control unit - Manual eroding with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Amperes, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up carousel changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special features: Bedjyr I Aiopfx Acvoda - Linear measuring system on all axes (Z-axis standard on series model)

Condition: used, Year of construction: 2016, functionality: fully functional, conveyor belt width: 600 mm, total length: 9,770 mm, total width: 770 mm, motor manufacturer: SEW, Equipment: type plate available, Belt Conveyor/Belt Band/Conveyor Belt 9.77 Meters Manufacturer: AMI Year of manufacture: 2016 Condition: used Total length: approx. 9,770 mm Bdedsyvhg Dopfx Acvea Total width including motor: approx. 770 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Belt width: approx. 600 mm Belt type: longitudinal grooves Material: steel Frame height: 300 mm / 80 mm Incl. SEW motor 0.55 kW/rpm 1360/87 The belt must be installed on site Internal article number: 2026031801 The conveying system was operational until dismantling. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Pickup location: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized offer or advise you on concept development or installation questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies from various industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or complementary components such as picking racks or containers.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AS14824, number of spindles: 6, spindle speed (max.): 6,000 rpm, bar passage: 14 mm, bar diameter (max.): 14 mm, total width: 2,150 mm, total length: 1,466 mm, total height: 820 mm, turning length: 30 mm, Cam-controlled multi-spindle automatic lathe TORNOS AS14 – fully overhauled in 2016! Retrofit year: 2016 Machine counter: 1,957,690 produced parts (as of 19.12.25) Number of spindles: 6 Control: cam-controlled Max. turning diameter: Ø14 mm Max. turning length: 30 mm Spindle speed: 6000 rpm Spindle power: 7.5 kW Bdsdpfx Aceyxnp Djvoa Weight: 2200kg Dimensions (W x D x H): 2150 x 820 x 1466 mm Transport, collection, and disassembly must be organized by the buyer.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Bdjdpfx Ajyrqpfecvja Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: MAZATROL, controller model: 640, table width: 650 mm, table length: 1,740 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of axes: 4, This Mazak MTV 655/60N Vertical Machining center was built in 2007. It is operated through a Mazatrol 640 control unit and has 4 axis. The machine works with a spindle speed of up to 6000 rpm. Includes a chip conveyor. Additional equipment • Chip conveyor Machine Benefits Bjdpfxsyi El Aj Acvoda Technical Machine Benefits • Rapid feed x, y 26 m/min - z 20 m/min • Tool turret 30 positions • Tool shank cat-50 • The mazatrol 640 control is a conversation / dialoog • The 4 axis can be disassembled and is integrated by the cnc

Condition: not inspected (used), Schröder double-jacketed pressure tumbler, steam tumbler, heat tumbler, 2500 liters Preheating or thawing of meat possible For heating, the tumbler must be connected to a steam generator Water vacuum pump Bjdpfxswg H D Nj Acvsda Machine is offered as shown in the photo. All cables are labeled, which simplifies electrical connection. The machine was in operation until the last day and had to be dismantled due to its width. It was disassembled by the sausage manufacturer's in-house technician, and all electrical cables were numbered. The machine was dismantled in working condition. We have not reassembled or tested the machine.

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Bdedpfx Acowunwyovea Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Bdodpfeyr Tlpjx Acvja Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: good (used), Year of construction: 2002, Machine type: CNC Lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Bodpfxjkyrwwo Acveda Year of manufacture: 2002 Available immediately Ex site for self disassembly Optionally we can offer dismantling and loading

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, overall weight: 11,000 kg, total length: 18,800 mm, total width: 4,310 mm, load capacity: 20,000 kg, main lifting speed: 4 mm/min, working height: 8,000 mm, Equipment: documentation/manual, Overhead Crane Konecranes – Type: double girder – Capacity: 20,000 kg – Lifting height: 8 m Bdedpfjyrr D Dsx Acvsa – Year of manufacture: 2006 – Type of hoist: wire rope hoist – Manufacturer: Konecranes Dimensions – Span: 18,800 mm center-to-center – Installation height: 840 mm – Total width: 4,310 mm – Wheelbase: 3,800 mm – Suitable for crane rail: A65 / 60×40 / 60×30 – Own weight: approx. 11,000 kg Speeds – Hoisting: up to 4 m/min (stepless) – Trolley travel: up to 20 m/min (stepless) – Crane travel: up to 32 m/min (stepless) Features – Control: radio remote control – Crane documentation present: yes – Electrical schematics available: yes – Condition: in good condition. – Disassembled: yes, immediately available Optional – Crane power supply – Transport to your location (unloaded or unloaded with truck-mounted crane) – Crane modification by NEN-EN 1090 certified structural engineering company

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, Venti Oelde Extraction System ???, ??? m² filter area, year ???, incl. 3 powerful fans, excl. spark extinguishing system The listed machine is sold as a used unit. The sale is made under exclusion of any warranty for material defects. The machine is sold as inspected and under exclusion of any liability for defects. The seller does not provide any guarantee as to functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in the case of intentional or grossly negligent conduct on the part of the seller. Bdjdpfx Aoywflascvsa Dismantling and Transport Dismantling of the machine is the buyer’s responsibility and risk. The buyer bears all costs and risks associated with disassembly, loading, and transportation. Transfer of Risk The risk passes to the buyer at the latest with the start of dismantling or loading. Other No liability is assumed for hidden defects. All information regarding the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Bedpfx Aedzqnyocvoda Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,336 h, functionality: fully functional, Arizona 1280GT flatbed printer Purchased new from Canon in 2019. The printer is in full working condition and can be demonstrated in operation. It will be available within 2 months. Covered by a maintenance contract with Canon. White inks can be replaced if required. 125 cm (W) x 250 cm (L) x 48 mm (thickness) Edge-to-edge (full bleed) printing Bdodpfx Aoyrn H Uecvsa True flatbed with vacuum table for securing rigid media or objects True roll-to-roll printing (with Roll Media Option) Variable droplet sizes from 6 to 42 picolitres. The ability to reduce drop size to 6 picolitres enables sharp images with smoother gradients and quarter-tones. The capability to jet larger droplets up to 42 picolitres ensures uniform color fills. The result is near-photographic print quality, with sharpness previously only seen at 1,440 dpi resolutions or higher. Text as small as 2 pt. is perfectly legible (with High Definition mode). Transport, assembly and disassembly are the responsibility and risk of the buyer. The machine is 100% operational.

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Bdjdpsmza S Eefx Acvsa Filter CURRENT STATUS: Disassembled and stored in our facilities.

Year of construction: 2023, condition: like new (used), functionality: fully functional, machine/vehicle number: Ohne, The Solarfold PV Container is an innovative, mobile photovoltaic solution for flexible power generation precisely where energy is needed. The entire solar power plant is housed in a 20-foot high-cube container and can be assembled and commissioned on site in a short time. With an installed capacity of up to 130 kWp and a total of 196 PV modules, the Solarfold offers a powerful, scalable solution for temporary or mobile energy supply. The system is fully pre-configured and pre-wired. Thanks to its innovative aluminum rail system and mobile ground anchors, the installation can be set up without complex foundation work or cable trenches. This makes the Solarfold particularly suitable for projects with changing locations. Bedpfx Aeytblyscvsda Technical highlights: Rated power: up to 130 kWp PV modules: 196 units Container: 20' HC (High Cube) Transport weight: approx. 13.5 t Module surface area in operation: approx. 6 m × 123 m Integrated inverter Modules fully pre-wired Rapid assembly and disassembly Advantages: Mobile power generation for flexible sites No soil sealing or cable trenches required High energy yields and short payback period Transportable by truck, train, or ship Typical applications: Construction sites and infrastructure projects Agriculture Industry and commerce Events and festivals Charging infrastructure for e-mobility Temporary power supply or off-grid applications The Solarfold enables sustainable, economical, and flexible power production and can be combined with battery storage systems as required by the project.

Condition: reconditioned (used), functionality: fully functional, Herminghausen SR2 Centerless Cylindrical Grinding Machine High-precision and conventional centerless cylindrical grinding machine. Suitable for grinding workpieces up to 40 mm in diameter. High machine and grinding stability due to a robust cast iron base and hydrodynamic segment jaw bearings. The low construction height provides excellent accessibility to all essential functions. Fast and simple conversion for different workpieces and materials. The machine has been disassembled, defective parts replaced, painted, and rebuilt. It is in very good mechanical and electrical condition, ready for immediate operation. Bjdpfxsyvn Ubj Acvoda Commissioning and training/instruction in machine operation and grinding technology are available.

Condition: used, machine/vehicle number: NEW-54, Year of construction: 2012, Log stacker Svetruck, type TMF 15/11 year of construction 2012 Mileage 16370 lt. counter Total weight 58500 kg Machine dimensions complete in length x width x height 11400 x 3900 x 6000 mm Machine dimensions (disassembled) in length x width 7500 x 3900 mm Height without dimensions 4700 mm Height without mast and mast support 4300 mm Machine dimensions mast in length x width x height 8000 x 1600 x 2000 mm Dimensions grapple in depth x width (closed) x height 1400 x 3600 x 4200 mm Length grab open 5200 mm, height grab 4000 mm Wheelbase front 1500 mm Height 250 mm (pole shield) Wheelbase rear 1600 mm Height 400 mm Lifting capacity telescope retracted max. 15000 kg Bedpfx Acehhkf Njvjda Lifting capacity telescope extended max. 11000 kg Stacking height telescope extended (open gripper) 8000 mm Stacking height telescope extended (closed gripper) 7600 mm Reach center drive axis max. 6870 mm Drive via 6 cylinder Volvo diesel engine with 289 KW / 393 PS Displacement 12130 cm³ Transmission type Torque converter Automatic 3 forward ? and 3 reverse gears Driving speed 27 km/h Tire size 18.00 x 25? We will be happy to send you more data and additional pictures on request. This description is not a binding offer and may contain errors. No guarantee on all data.

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Bjdpfx Aeyt Rmgjcveda Already disassembled without power (currently likely without PSU, but a PSU may be available). Inspection welcome north of Flensburg. B2B sale only.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. Bdedpfx Acswqg Iievea We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 052 249, grinding depth: 250 mm, center height: 260 mm, total width: 1,340 mm, total length: 3,455 mm, total height: 1,710 mm, spindle speed (min.): 3,600 rpm, spindle speed (max.): 40,000 rpm, grinding length: 1,000 mm, overall weight: 3,000 kg, rotational speed (max.): 40,000 rpm, rotational speed (min.): 3,600 rpm, grinding diameter: 200 mm, table speed: 10,000 mm/min, workpiece spindle speed (max.): 40,000 rpm, feed rate X-axis: 6 m/min, input voltage: 380 V, power: 15 kW (20.39 HP), The Voumard 5A LP1000 is a universally applicable internal and face grinding machine designed for high-precision grinding tasks in toolmaking, mechanical engineering, as well as single-part and small-batch production. Bedpfx Acjyvg Eleveda The machine enables internal, face, and plunge grinding, impressing with its robust construction, high accuracy, and versatile applications. Thanks to its automatic grinding cycles, it is suitable for both manual and semi-automatic operations. The specified price is exclusive of disassembly, packaging, and shipping. Sale from site, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Year of construction: 2015, condition: good (used), For Sale: Nawi Stainless Steel Bin Washing Machine Make: Nawi Year of Manufacture: 2015 Specifications: - Completely stainless steel - Steam heated - Equipped with infeed conveyor belt, width 1100 mm - Tilting device with infeed guide - Discharge screening system - Central control cabinet with touchscreen operation - Wash chamber dimensions: 2500x1700x1300 mm - Infeed + outfeed If you have any questions or comments, please feel free to contact us. Bsdpfoyiyxkox Acvjda Price includes disassembly Loading is included. Transport by arrangement Inspection possible on site. Kind regards, Leo Holland

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 1,100 mm, overall weight: 6,600 kg, spindle speed (max.): 10,000 rpm, Manufacturer: Mori Seiki Model: SV-50 Control: MSC 516 MB Axis: 3+2 (Nikken) X / Y / Z Travel: 800 × 510 × 510 mm Table size: 1100 × 600 mm Bdodpfx Acjyuw Akjvoa Max. table load: 1,000 kg Spindle: BT40 & 30 positions Spindle speed: 10,000 rpm Tool changer: 20–30 stations Machine weight: approx. 7,000 kg Availability: From June SOLDE GmbH specializes in the purchase, sale, dismantling, and loading of industrial machinery. With our expertise, we also handle the entire process, including disassembly, transport preparation, and export. We operate our projects throughout Europe, primarily with large machine tools such as machining centers, milling machines, and boring mills.

Condition: reconditioned (used), The STROBEL 45-250 is an industrial blindstitch sewing machine (also known as a blindstitch or closed-stitch machine), designed for closing linings, outerwear, leather goods, and footwear with the highest precision and quality. Manufactured by the renowned brand STROBEL, a global leader in high-end stitching technology, the 45-250 stands for reliability, sturdiness, and a professional finish. This machine is pre-owned but has been fully overhauled by our specialized technical team, who have checked every component and replaced all worn parts. It is delivered ready for use, providing performance and accuracy equal to a new machine—ideal for tailoring workshops and garment manufacturers seeking an efficient and long-lasting solution. Bsdpfx Aoxrb Htscvjda Specifications Brand / Model: STROBEL 45-250 Type: Industrial blindstitch / chainstitch sewing machine Condition: Used – fully overhauled and tested Main applications: sewing linings, sleeves, jackets, coats, suits, and leather goods Sewing system: precision mechanical, with adjustable stitch Sewing speed: up to 2,500 stitches/minute (depending on fabric type) Quick settings: adjustable stitch depth, length, and thread tension Automatic lubrication for reduced maintenance Silent motor and stable mechanism for smooth and continuous operation Features The STROBEL 45-250 is a high-precision machine, perfect for invisible stitches with a refined finish: - Invisible, professional-quality stitching, ideal for linings and high-end outerwear. - Perfect stitch consistency, even on difficult or stretch fabrics. - Easy adjustment for various materials and thicknesses. - Robust build ensures stability and a long operational life. - Low noise and reduced vibration for a comfortable working experience. - Complete technical overhaul and functional testing before delivery. Overhauled Every used STROBEL 45-250 undergoes a thorough overhaul in our technical center, including: - Disassembly, complete cleaning, and lubrication. - Replacement of worn parts with original or certified components. - Alignment of the sewing mechanism and adjustment of the blindstitch. - Final functional tests on various fabrics. The result is a refurbished, ready-to-use machine, with guaranteed performance and long-term reliability. Applications The STROBEL 45-250 is used in many segments of the textile industry: - Garment manufacturing (linings, sleeves, jackets, coats). - Professional tailoring shops and high-fashion ateliers. - Production of footwear and leather goods requiring strong, invisible seams. - Fashion schools and tailoring training centers. The STROBEL 45-250 – Used and Overhauled is the ideal choice for those seeking precision, reliability, and professional results. Perfect for tailors, garment manufacturers, and textile companies looking for a solid and high-performance machine, it offers top-level performance at a competitive price. Thanks to its thorough overhaul and technical testing, the STROBEL 45-250 guarantees flawless, invisible seams, long operational life, and a smooth, quiet working experience. A safe investment for those aiming for efficiency and sartorial perfection.