Used Die Cut for sale (18,279)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Kwedpfxowr T Aie Adtst Center Line System: for Quick Job Changeover Working Hours: 1500h

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame Kwsdpfxewq Dwzs Adtst – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Kwsdpfxswfq T So Adtst Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards Kwodpoxzulzefx Adtet – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV - 1680x1160 Machine little used, in very good condition, new upgraded electronics + laser protection Equipment: - pneumatic clutch and brake - control panel - New upgraded electronics + laser protection Ksdpfxsuwruao Adtowt - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools - hard plate for pressure

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III - 1480x1070 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - control panel - quick release frame + additional frame - 3 modes of operation: single, continuous, with time delay on opening Kwjdpfx Adsuwrtietst - central lubrication - additional safety guards - operating tools - hard plate for pressure

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III - 1480x1070 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - control panel - quick release frame (electric) + additional frame - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards Kwsdpfjuwrrrox Adtjt - operating tools - hard plate for pressure

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fully automatic die-cutting and creasing of paper, cardboard, and films Magnopro I-CUT12090 Year of manufacture: 2022 Latest software including NEW touchscreen control unit from 2024 Kwedpfxjwbgm He Adtot Connection: 230 V Material thickness depending on model: 10 mm Data formats: PLT, DXF, HP/GL, PDF, EPS Feeder: sheet feeder with vacuum/roll-off device (optional) Max. format: 90 x 120 cm Dimensions (W x D x H): 320 x 150 x 115 cm Alignment: CCD camera system Speed up to 1000 mm/sec Positioning: vacuum belt Dpkktr Programming: barcode reader, QR code Accuracy: +/- 0.1 mm Sheet and roll feeder! Plus 19% VAT For self-collection only

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: – Pneumatic clutch and brake – Console Kjdsuwru Hepfx Adtjwt – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Kwsdeff Apijpfx Adtot Stroke 20 mm

Year of construction: 1988, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1624, For sale: Two identical WUPA PS 6.2 punching machines On request, we offer two identical punching machines of the type WUPA PS 6.2 for sale. One of the machines was completely overhauled in 2020. All essential components were renewed – including gripper punches, gripper chains, the platen, as well as all ball bearings. The machine has been in excellent condition ever since. The electronics have not been rebuilt or changed. Everything is original. Ksdpfjwnfgrjx Adtowt Documentation is complete. Both digital and analog, we have circuit diagrams and exploded drawings. Technical data: Model: WUPA PS 6.2 Year of manufacture: 1979 Max. sheet size: 1,450 x 1,050 mm Min. sheet size: 600 x 400 mm Max. capacity: 4,000 sheets/h Max. cutting force: 350 t Material thicknesses: – Paper from 80 g/m² – Cardboard up to 2,000 g/m² – Corrugated board up to EB flute Equipment: – Non-stop feeder – Non-stop delivery Note: All information provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, we will be happy to assist you. Best regards

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Kwjdswk I Iqepfx Adtet Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Kwsdpedzqmzjfx Adtet Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 1986, condition: ready for operation (used), A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible. Ksdpfoxgudbjx Adtewt

Condition: used, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg S Year 1958 - Serial-No. 12218 Size max.: 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Ksdotzc Spopfx Adtowt Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1966, machine/vehicle number: 155017, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1966 - Serial-No. 155017 N Kwjdpfxsh Axiqe Adtjt Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1968, machine/vehicle number: 32236, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBBYear 1968 - Serial-No. 32236 Size max.: 570 x 820mm Kedpfx Asnnyg Iedtjwt Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1962, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Ksdpfjtzc Svox Adtowt Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1963, machine/vehicle number: 142, Letter Press Tiegel - DIE CutterSize min.: 40 x 70mm - max. 260 x 380mm Kedemi U Nmspfx Adtowt Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmComplete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1960, machine/vehicle number: 16945, Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBGYear 1960 - Serial-No. 16945 Size min.: 210 x 280mm Size max.: 560 x 7700mm Ksdpfx Aerttuhedtswt Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.0800kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1957, machine/vehicle number: 120523, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1957 - Serial-No. 120523N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Kwodpfxsh Ayhrj Adtet Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1968, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBDYear 1968 Size min. 290 x 400mm Size max. 640 x 890mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Kwedpferkqi Uox Adtot Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1974, machine/vehicle number: 186403, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1974 - Serial-No. 186 403 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Kodpfoh Eg Tbox Adtjwt Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1972, machine/vehicle number: 13269, Franzenschneidemaschine - Fray DIE Cutter ABA G100Year ca. 1972 - Serial-No. 5515329002 Online-Video-Inspection by Skype-Video Ksdpfxsh Axg Is Adtewt We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 52, Letter Press Tiegel DIE Cutter Heidelberg GTS Serial-No. 52 931 N Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Kjdpfxsun Dxws Adtewt We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test