Used Demag Ac 155 for sale (516)

Condition: used, Year of construction: 2008, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, load hours: 35,000 h, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Iodpfx Agjwlkb Ns Dsa Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 15,000 kN, screw diameter: 145 mm, injection pressure: 1,454 bar, opening stroke: 2,900 mm, tool height: 1,400 mm, TECHNICAL DETAILS Clamping force: 15,000 kN Platen dimensions (H x V): 2,150 x 1,880 mm Tie bar spacing (H x V): 1,500 x 1,250 mm Min. mold height: 700 mm Max. mold height: 1,400 mm Max. opening stroke: 2,900 mm Screw diameter: 145 mm Shot volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 14,400 x 3,400 x 2,900 mm Iedpfx Ajxup T Hog Doa Net weight (incl. control cabinet): 74,000 + 21,000 kg Electrical & hydraulic equipment Rated power of pump motor: 165 kW Heating capacity: 97 kW EQUIPMENT Wittmann W 753 robot (year of manufacture: 2008) Safety enclosure Conveyor belt Service history notes: 2010: New screw with RSP and barrel 2015: New IBED 2015: New wiring panel 2017: New motor and 2nd pump 2017: New injection side cylinder piston BS with seals 2017: Replacement of oil cooler circulation pump 2017: Replacement of teach box (robot) 2018: Replacement of pumps P1 + P3 (at 65,800 operating hours) 2018: Replacement of hydraulic oil

Condition: used, Year of construction: 1991, operating hours: 35,498 h, functionality: fully functional, Equipment: documentation/manual, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume (70mm): 960 cm³ / 860 g Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2x Air valve: 1x Robot interface Equipment 2-circuit core pull / 2-circuit robot interface 5/2 air valve No.1 on moving platen Clamping force control Handling interface, Euromap 12 (32-pin) robot interface Iedpfx Aexk Tk Ijg Dsa Tool protection interface (ejector plate safety) Integrated hot runner control, 2 zones Mould protection Electrical plug combination

Condition: used, Year of construction: 2009, Injection moulding machine Sumitomo Demag IntElect 210/580-1000, year of manufacture 2009 (without the handling unit / temperature control devices / material supply [hopper, feeding device] shown). Demag 210: Screw diameter Ø 50 mm - Sumitomo Demag IntElect 210/580-1000, year 2009: 6260 x 1555 x 2219 mm (LxWxH), net weight 11,000 kg Description SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 210/580-1000 27,297 25,717 3,450,308 Iedpfx Aew E N S Heg Dsa

Condition: used, Year of construction: 2018, DEMAG Overhead Crane – 16 Tons Capacity – Year 2018 Iedpfjxb D Nvsx Ag Doa Manufacturer DEMAG Cranes & Components GmbH – Germany Type Industrial motorized overhead travelling crane – single or double girder Industrial Applications Heavy-duty lifting in steel plants, fabrication workshops, boiler-making, general machining, and logistics warehouses Main Technical Specifications: - Rated capacity: 16 tons (16,000 kg) - Year of manufacture: 2018 - Manufacturer: DEMAG – global leader in industrial lifting - Motorized travel on rails - Electric wire rope hoist (DEMAG standard, high capacity) - Power supply: industrial three-phase - Control: pendant or radio remote (depending on configuration) - Condition: used – recent, robust design 🧩 Machine Usage The DEMAG 16T overhead crane is engineered for heavy-duty lifting in demanding environments. Its high capacity and modern design ensure efficiency, safety, and long-term performance. ⚙️ Features / Differentiators - Medium-high capacity (16T) for heavy industrial operations - Recent build (2018) compliant with modern safety standards - Integrated DEMAG hoisting and electrical systems - Compatible with automation and remote-control options

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Overall length: 6,500 mm Overall width: 1,900 mm Overall height: 2,300 mm Ijdpjw Hq Hhsfx Ag Doa Machine weight (net): 13,100 kg

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Ijdpfsuch Rfex Ag Doa Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: used, Year of construction: 1999, Technical details: Iedpjwvkgmjfx Ag Dsa screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN

Condition: good (used), hall crane, crane, crane runway, crane rails, overhead conveyor, light crane system -Manufacturer: Demag, 2x straight sections overhead conveyor for light crane system KBK II -Load capacity: 800 kg -Dimensions: 1x 6015/105/H195 mm / 1x 5630/105/H195 mm -Delivery/Price: complete Iodpsu N Sg Tjfx Ag Doa -Total weight: 189 kg

Condition: used, Year of construction: 2007, Injection moulding machine Sumitomo Demag IntElect 150/520-610, year of manufacture 2007 (without the shown handling unit / temperature control equipment / material supply [hopper, loader]). Designation SGM Operating hours Cycle counter Cylinder heating Electric drives Sumitomo Demag IntElect 150/520-610 29,125 26,530 3,562,329 - Sumitomo Demag IntElect 150/520-610, year of manufacture 2007: 5348 x 1468 x 2400 mm (LxWxH), net weight 7,400 kg. Iodpfsw E N S Tex Ag Dea Demag 150: Screw diameter Ø 45 mm.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm General Data Measurements width 1264 mm Measurements depth 4308 mm Measurements height 1779 mm Machine weight 4200 kg Injection Unit Screw diameter 25 mm Shot weight 46 g Heating capacity 5.7 kW Nozzle pressure 30 kN Clamping Unit Clamping force 500 kN Max open daylight 710 mm Distance between bars 370 x 370 mm Mould height min 200 mm Mould height max 410 mm Ejector stroke 90 mm Ejector force for / back 25 kN Additional Equipment Granule Dryer Iodpew Efy Tjfx Ag Dja Handling System Conveyor Belt - 1400 mm x 400 mm Precision Scale Temperature Units - 2x HB‑Therm This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 864 3 0066, clamping force: 8,000 kN, screw diameter: 95 mm, clearance between the columns: 1,120 mm, displacement volume: 2,801 cm³, injection pressure: 1,832 bar, injection weight: 2,011 g, mold height (min.): 500 mm, ejector force: 138,000 N, ejector stroke: 350 mm, opening stroke: 1,030 mm, plate length: 1,620 mm, plate width: 1,500 mm, total length: 10,600 mm, total width: 2,700 mm, total height: 2,700 mm, overall weight: 33,500 kg, heating capacity: 42.6 kW (57.92 HP), pressure: 190 bar, pump power: 412,000 W, power: 149 kW (202.58 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 329 A, Equipment: documentation/manual, Model: 800/1120–5200 Machine: Demag Ergotech System Type: Injection moulding machine Year of manufacture: 2005 Clamping force: 8000 kN Locking force: 8800 kN Opening stroke: 1030 mm Mould height min./max.: 500 / 1050 mm Platen size (H × V): 1620 × 1500 mm Clear tie bar spacing: 1120 × 1000 mm Max. mould weight: 10,800 kg Ejector stroke: 350 mm Ejector force: 138 kN Ejector retraction force: 58 kN Screw diameter (average): 95 mm Shot volume: 2801 cm³ Injection pressure: 1832 bar Shot weight (PS): 2011 g Installed barrel heating: 42.6 kW Electric screw drive: 51 kW Oil tank capacity: 1300 l Pump output: 412 l/min Pump unit: 133 kW Installed total power: 133–149 kW Pressure: 190 bar Net weight (without oil fill): 33,500 kg Overall dimensions (L × W × H): 10.6 × 2.7 × 2.7 m Ijdpfxjxa D Uve Ag Dja Total weight clamping/injection unit: 7500 kg Continuous sound pressure level: 70 dB(A) Connection: 3 × 400 V, 50 Hz, 329 A

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) Isdjhrkrtepfx Ag Dja 6 pcs. end covers suitable for KBK1 runners

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Isdpfxewvkgge Ag Dsa injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 100 bar -Liter output: 6 l/min Iodpfxjb A Hcis Ag Doa -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 50,000 h, Demag Ergotech-Concept 1000/500-600 Year of construction 2007 NC4 control system Operating hours: approx. 50,000h (pump) Screw diameter 50 mm Fuel weight: approx. 359gr/hp Spar distance 500 x 500mm Machine weight: 5700kg Extras: 1x core pull & handling interface Isdpfx Agewnz Edj Doa Machine is free! Subject to alterations, prior sale and errors excepted!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 8,000 h, Injection Unit Screw diameter 25, 30, 30, 35, 40 mm Shot weight 54, 81, 102, 139, 181 g Stroke volume 20 cm³ Injection pressure 2800, 2400, 2800, 2180, 1670 bar Clamping Unit Clamping force 1000 kN Opening stroke 380 mm Ejector stroke 110 mm Iedpfx Agjw Efzkj Dea Ejector force for / back 35 kN This SUMITOMO SHI DEMAG IntElect 100/470-180 was manufactured in 2014. It features a fully electric, direct-drive main axes for high precision and energy efficiency, with energy savings up to 80% compared to hydraulic machines. Suitable for clean-room environments, it operates quietly with high injection dynamics. Clamping force is 1,000 kN with a maximum mold opening stroke of 380 mm. Consider the opportunity to buy this SUMITOMO SHI DEMAG IntElect 100/470-180 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 878 0643, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,800 kg, pressure: 190 bar, pump power: 45,000 W, input frequency: 50 Hz, input voltage: 400 V, input current: 173 A, Equipment: documentation/manual, Machine: Demag Ergotech System Machine type: Injection moulding machine Isdpfx Agsw U Dp Dj Doa Clamping force: 3000 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection pressure: 1877 bar Shot weight: 1090 g Overall length: 6.5 m Overall width: 1.9 m Overall height: 2.3 m Total weight: 13,800 kg Pump output: 243 l/min Pump drive: 45 kW Installed total power: 64–72 kW Pressure: 190 bar Connection: 3 × 400 V, 50 Hz, 173 A

Condition: good (used), Travel Motors / Crane Motors / Drive Motors with Gearboxes - 22 units. 1. Gear Motor: Type - ZBA 132 A4 B050 - 1 unit (2 units available). Gearbox type - AUH 70 DD 2. Gear Motor: Type - KBA 125 B4 - 2 units Isdpfou Uh Ubex Ag Dsa Gearbox type - AF12 3. Gear Motor: Type - KBA 112 B4 - 2 units Gearbox type - AF 10 4. Gear Motor: Type - KBF 80 8/2 - 2 units Gearbox type - AF 05 5. Gear Motor: Type - KBF 71 8/2 - 2 units Gearbox type - AF 06 6. Gear Motor: Type - KBV - 71 A2 - 1 unit Gearbox type - D 05 7. Gear Motor: Type - ZBF 112 A4 B050 - 2 units Gearbox type - ADK 60 TD 8. Gear Motor: Type - KBF 71 B 8/2 - 2 units Gearbox type - D 04 9. Gear Motor: Type - 16/8 KF 8-2 - 1 unit Gearbox type - 53 DF

Condition: good (used), Year of construction: 1997, Ref. no.: 18142 Iedpfswm Iz Aex Ag Dja Hersteller: DEMAG Type: Ergotech pro 50-270 Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! Iedpfjq R N Tqex Ag Dsa also available as Craneset

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Ijdpfx Agewkiicj Dsa

Condition: good (used), Year of construction: 2006, Ref. no.: 18138 Hersteller: DEMAG Type: IntElect 80-370-100 NC 4 All electric Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Iodpfx Agjwm Izio Dja Distance between tie bars: 370 X 370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg

Condition: used, Year of construction: 2006, A Demag Ergotech injection molding machine including Wittmann robot and machine housing is available. 1) Injection molding machine Demag Ergotech 50/355-200, year of construction: 2006, tie bar distance X/Y: 355mm/355mm, min. installation height: 210mm, max. platen distance: 610mm, screw diameter: 25mm, injection weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control: CDIAS. 2) Handling robot Wittmann W721, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Cage. Documentation available. On-site inspection is possible. Ijdewvadnjpfx Ag Dea

Condition: good (used), Year of construction: 1998, Ref. no.: 17507 Hersteller: DEMAG Type: ERGOtech system 800-310 Year of construction: 1998 Iodpewm Iyfjfx Ag Dea Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg