Used Demag V 70 for sale (547)

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Gsdexrf Nrspfx Acmjkd

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Gjdszp Ew Dopfx Acmokd - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Gkodezh N Tyopfx Acmed delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Gkedjymqz Rjpfx Acmed

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Gsdj Ahkfkspfx Acmskd Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine Gkedpforr Ehmjx Acmjd - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: excellent (used), Year of construction: 2012, Wittmann TP+D-S-2, 140,SO-C, S,X- TVEBBH2M_04_00 (2012) 1\. Overview & Model Decoding 1. Manufacturer: Wittmann (Austria) Gkodpfs Ah E Adox Acmed 2. Year of Manufacture: 2012 3. Model Series: Tempro Plus D (TP+D) – high-end temperature controller equipped with a touchscreen interface 4. S-2: S (Single) = single-circuit configuration / 2 = dual connection configuration or generation 2 module 5. 140: Pressurized water medium with a maximum operating temperature of up to 140 °C 6. SO-C: Solenoid valve / Option C cooling configuration 7. S: Standard pump and heating size configuration 8. TVEBBH2M_04_00: Internal PCB assembly or firmware system part code from the rating plate 2\. Main Technical Specifications (Tempro Plus D 140 Series) 1. Heat Transfer Medium: Pressurized water (up to 140 °C) 2. Heating Capacity: Typically 9 kW or 12 kW (depending on the exact internal configuration) 3. Cooling Capacity: Approx. 40 kW – 60 kW at 130 °C 4. Pump Performance: 5. Max. Flow Rate: Approx. 40 – 60 l/min 6. Max. Pump Pressure: Approx. 4.5 – 6.0 bar 7. Power Supply: , 8. Control System: Microprocessor Touchscreen Display (Tempro Plus D visualization unit) 9. Communication: Injection molding machine interface (Serial/CAN-bus/Ethernet/Wittmann B2/C2 protocol)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm Godpfx Aj Aggumscmekd • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS • PLC operating hours: approx. 61,679 h Gedo Aggpajpfx Acmekd • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Gjdpeuzx T Refx Acmekd

Condition: new, functionality: fully functional, Basic Drive Specifications (ACS800-DEMAG 04M-0170-3) Product Series: ACS800 (ABB Industrial Low-Voltage Drive) Application Software: DEMAG (Loaded with Demag's proprietary crane control program rather than standard ABB firmware). Construction Type: 04M (Drive module designed for cabinet installation with specialized mechanical configurations). Rating/Size: 0170 (Nominal current rating indicator; fits an R7 frame size).Normal Output Power: 132 kW Continuous Max Current: 248 A Heavy-Duty Power (Cranes): 110 kW (with 202 A continuous output) Voltage Rating: 3 (Three-phase input supply voltage of 380 V to 415 V AC). Hardware & Software Option Codes (+D150+E210+H355+H362+J400+L501+L502) The plus-codes define the factory-installed modifications and optional expansion modules: Code Component / Feature Description +D150 Brake Chopper Built-in dynamic braking control module. Essential for hoisting to safely dissipate energy generated during load lowering. +E210 EMC Filter Low electromagnetic emission filter conforming to standard European industrial standards (Category C3/Class A). +H355 Control Cabling Entry Specifies a specific bottom or standard orientation configuration for thick power/motor cables. +H362 Coated Circuit Boards Provides an extra layer of protective chemical coating on internal PCBs to prevent corrosion from dust, humidity, or aggressive industrial environments. +J400 Control Panel (CDP312R) Removable digital control panel with alphanumeric display mounted on the unit or cabinet door for programming and metrics tracking. +L501RDIO-01 Digital I/O First digital I/O extension module, giving extra programmable inputs/outputs for crane safety limits or interlocking. Gkjdpfoy Udtkex Acmjd +L502RAIO-01 Analog I/O Analog I/O extension module, allowing precise master/joystick references or load cell signal reading. Brand new never used. Please check out our other listings as well.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, overall weight: 11,800 kg, total length: 16,700 mm, load capacity: 10,000 kg, working height: 11,350 mm, lifting height: 11,350 mm, Equipment: documentation/manual, Demag overhead crane – Type: double-girder – Capacity: 2 x 5,000 kg Gkedpfxoyvr Hue Acmod – Lifting height: 11.35 m – Year of manufacture: 2021 – Hoist type: wire rope hoists – FEM/ISO hoists: 2m / M5 – Manufacturer: Demag / Siempelkamp Dimensions – Span: 16,700 mm (center-to-center) – Total length: 17,000 mm – Installation height: 1,600 mm – Width: 3,860 mm – Wheelbase: 3,150 mm – Suitable for crane rail: A55 / 50 x 30 mm – Net weight: 11,800 kg Speeds – Hoisting: 8/1.3 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Features – Control: radio control – Crane manual available: yes – Electrical diagrams available: yes – Condition: in very good condition – Disassembled: yes, available immediately – Excluding rotating carousel

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,000 h, clamping force: 1,200 kN, screw diameter: 40 mm, Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2025 bar- Max. Metering/Dosing Volume: 231 cm³- Mold Height Min./Max.: 250 / 850 mm- Distance Between Tie Bars: 470 x 470 mm- Centering Ring Diameter (Ejector/Nozzle): 125 mm- Core Pull: 1 circuit via switching valve on movable mold platen (Q-independent)- Operating Hours: Drives 23,000 hrs- Pump Drive Power: 22.0 kW- Power Supply: 400 V +-10% / 50 Hz, 3 Ph + N + PE- Oil Cooler Max Water Temp: 25°C Gkodez Eq Svepfx Acmjd

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Gedozhtfmepfx Acmskd Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures

Condition: used, CNC CONTROL Controller: C-Dias CLAMPING UNIT Clamping force kN: 4.200 Tie-bar clearance (H x V) mm: 820 INJECTION UNIT Injection unit size (Euromap): 2300 Screw diameter mm: 70 Max. shot weight (PS) g: 1.100 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 4 Hot runner control zones: 40 Godpfx Aoz Alptscmekd Handling robot (model / year): Wittmann DR 832 (2015) Robot strokes X / Y / Z mm: 900 / 1.600 / 2.500 Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 187 + 114

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Godpfszxg T Esx Acmekd Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: not inspected (used), functionality: unexamined, Year of construction: 2007, total length: 18,000 mm, total width: 6,000 mm, load capacity: 500 kg, main lifting speed: 8 mm/min, working height: 4 mm, For sale is a used DEMAG KBK lightweight crane system, including an electric chain hoist, electric traveling unit, control panel, and extensive original accessories. The system was professionally disassembled and stored in a dry environment. It is ideally suited for workshops, assembly areas, production facilities, maintenance, or logistics. Technical data Manufacturer: DEMAG System: KBK lightweight crane system Load capacity: 500 kg Crane span: approx. 18.9 m Span: approx. 6 m Lifting height: 4 m Lifting speed: 8 / 2 m/min Electric chain hoist with electric traveling unit Voltage: 400 V Protection class: IP55 Year of manufacture of chain hoist: approx. 2007 Scope of delivery Godpfx Acszwt Tcsmekd DEMAG electric chain hoist 500 kg Electric traveling unit Pendant control DEMAG KBK crane rail approx. 18 m x 6 m Trolley Rail connectors Suspensions Connecting elements Original mounting material Additional accessories as shown in the photos Condition Used Disassembled and stored Visually in good overall condition Sold as is Advantages ✅ Original DEMAG quality ✅ Extensive accessory package included ✅ Compact lightweight crane system ✅ Quick assembly possible ✅ Ideal for production and assembly areas Inspection Inspection is possible by appointment in Waiblingen. Please note that the sale of the lightweight crane system is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Disassembly, removal and transport are the responsibility of the buyer and at his own risk. • The buyer is responsible for providing personnel, tools and transport equipment. The personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l Gkjdpfx Acoz D Tnqsmjd GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, Year of construction: 2007, operating hours: 98,000 h, clamping force: 80 kN, displacement volume: 61 cm³, injection pressure: 2,740 bar, overall weight: 3,900 kg, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Gksdpfx Acs Aiv D Tsmod terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Godpfx Aszkfd Tecmokd Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. The machine is in very good condition and is powered on.

Condition: good (used), Hoisting motor with chain hoist and control panel. Load capacity: 1/1 125 kg 8 m/min. 2/1 250 kg 4 m/min. Depth: 300 mm Gsdpfjzcm R Tox Acmjkd Height: 400 mm Width: 500 mm Weight: approx. 22 kg (net) Condition: good, second-hand

Condition: good (used), 2 lifting motors/chain hoist without suction lifter Gkedpfx Acjxaubajmsd Length: 13000 mm Width: 5600 mm Height: 3250 mm Motor 1 lower edge: 3040 mm Motor 2 lower edge: 2970 mm

Condition: used, Year of construction: 2004, operating hours: 94,000 h, clamping force: 150 kN, displacement volume: 124 cm³, injection pressure: 2,420 bar, overall weight: 7,900 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Gsdpfj Ahrw Uex Acmekd terms of payment: 100% prior to delivery

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor-mounted control Dimensions of steel structure approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB280 beams (running rails) with 8 U200 supports. Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Overall height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 - center to center) System will be delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor-mounted control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Gedpfsz Tdbnex Acmokd Shipping via freight forwarder or collection only by prior appointment

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits Godox D Eccepfx Acmokd • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Dimensions Machine Depth 4308 mm