Used Demag Ac 155 for sale (560)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1977, load capacity: 10,000 kg, working height: 6,000 mm, Equipment: documentation/manual, DEMAG 10,000 KG double-girder overhead crane. - Span: 17,330 mm - Lifting capacity: 10,000 KG - Lifting height: 6 m - Year of manufacture: 1977 Delivery, customization, installation, inspection, and commissioning are all possible upon consultation. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and swivel cranes - Chain hoists - Demag KBK rails and accessories Dcjdpfx Aqs Afuplevjp - Vahle conductor bars Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Dcsdpsz H N Ncjfx Aqvsp

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor-mounted control Dcedpoz Tdbnsfx Aqvop Dimensions of steel structure approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB280 beams (running rails) with 8 U200 supports. Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Overall height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 - center to center) System will be delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor-mounted control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by prior appointment

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,250 h, clamping force: 13,000 kN, screw diameter: 110 mm, injection weight: 5,200 g, Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details. Dsdpfxoz E Hh He Aqvscp - Control Brand / Model: Demag NC4- Hydraulic Core Pulls: 4- Hydraulic Cascades: 12- Hot Runner Control Zones: 32- Handling System / Robot: Wittmann DR 853 227 (YOM 2014)- Robot Z-Axis Stroke: 3500 mm- Robot Y-Axis Stroke: 2500 mm- Robot X-Axis Stroke: 1600 mm- Robot C-Axis: 90°- Robot B-Axis: Servo 270°- General Condition: Very good overall condition, annual maintenance performed, currently under power / in series production

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: ROD391, Technical specifications: 1x Demag KBK 1 pillar slewing crane, NL 80KG, with Abus chain hoist, manufactured in 2021 Load capacity at full outreach: 80KG Height: approx. 3.65 m (pillar 3.05 m + pillar extension) UK jib length: approx. 3.1 m Outreach: 5 m Hook height: approx. 2.7 m Total weight: approx. 400KG with 80KG Abus GM chain hoist, manufactured in 2021 including bolts, cable carrier, trolley, end cap, etc. Slewing range: 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000KG, please inquire See pictures Dcjdez Tcv Depfx Aqvjp Shipping via freight forwarder or collection only by prior arrangement

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Djdpfx Ao Aarbbeqvjcp

Year of construction: 2016, condition: excellent (used), machine/vehicle number: SI25t, DEMAG hook block P DH PK DK DC Payload 25000Kg / 25t mint condition - unused Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Dodpfx Aqjupwn Usvscp Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Djdpsr Igtysfx Aqvscp Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, functionality: fully functional, Year of construction: 1996, machine/vehicle number: ROD397XX/999, DEMAG KBK overhead crane with dimensions of approximately 22 x 5 m (2 x 5 m span) Load capacity / lifting capacity: 2 x 250 kg – 0.25 tons Technical data of the system: Overhead crane system with Demag KBK2 rails Dsdpfx Aqjz Tc D Ievjcp The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. Including 2 bridge cranes, each with a capacity of 250 kg Including 2 x 250 kg Demag DK+DC chain hoists (the latter is a more recent model) The crane is disassembled and immediately available Used condition, see photos Item location is 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125 kg - 1600 kg Please feel free to request a quote for your overhead crane, specifying the load capacity and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MIKAOG1+2, 1 Demag KBK II wall-mounted slewing jib crane, 80 kg safe working load / lifting capacity Crane available 2x! Dcsdox U Nqbopfx Aqvsp Jib length 3m, 80 kg capacity With Demag DC chain hoist, 80 kg capacity Weight incl. wall bracket approx. 150 kg Complete with chain hoist, festoon system, trolley, and small parts Slewing range 270° Item location is 75053 Gondelsheim Unit is completely dismantled and immediately available Shipping via freight forwarder or collection Please inquire about shipping costs based on ZIP code

Year of construction: 2014, condition: like new (used), machine/vehicle number: 20020235 UG, DEMAG ALU crane canopy Crane runway dimensions approx. 6x4m Payload / lifting capacity 250 KG - 0,25to Technical data of the system: Crane runway made of Demag aluminum rails 180mm with internal power supply System is supplied complete: Rails, rail connectors, trolleys, end plates, cable drag, brackets/hangers etc. incl. Demag DCS PRO2-250 NL 250KG chain hoist - lifting speed 0-16m / min !!! Demag DCS chain hoist 250KG (NEW PRICE 4700 Euro !) Can also be exchanged for a standard model DK2-250 to reduce costs - please inquire ! NEW CONDITION - installed in clean room ! Crane is disassembled and immediately available Dcedpfjty S A Njx Aqvop Mint condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Demag KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with lifting capacity and dimensions.

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Dodpfx Aqez H Rc Dovjcp

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Dcsdpfxoz Ipkcs Aqvop Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht Dcsdpfjrr Ehmsx Aqvsp

Year of construction: 2011, condition: excellent (used), machine/vehicle number: MBMA500Ausschub, DEMAG KBK - double girder extending crane - crane runway with dimensions approx. 15x5m (5m bridge + 2 central 6.5m rails) with approx. 1.5m on both sides !!! extension. Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 500KG Demag DC chain hoist - lifting height approx. 5m Power supply on the long side by means of conductor rails Dcjdpfx Aeu I Ur Neqvep Crane is dismantled and immediately available Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Dcsdsz Hlx Hopfx Aqvep Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: ROD39, 1 Demag KBK I wall-mounted slewing crane, 400 kg payload / lifting capacity Jib length 2 m, 400 kg payload Equipped with Demag DC chain hoist, 400 kg capacity Weight including wall bracket approx. 200 kg Complete with chain hoist, cable carrier, trolley, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully disassembled and immediately available Shipping by freight forwarder or collection Please enquire for shipping costs by postal code Dcedpoxmuumjfx Aqvep

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Dedpfsz Ipi Sox Aqvjcp Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. TECHNICAL DATA Dodpfxo Ahkfko Aqvecp Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, single-girder crane, including steel structure with floor control. Dimensions of the steel structure approx. 7.5 x 4 m with 1x Demag bridge crane, 2 tons. Payload/lifting capacity: 2000 kg - 2 tons. Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams. Length of steel structure approx. 6 m Length of running rails approx. 7.5 m Dcedpoz Tdb Ujfx Aqvep Total width of steel structure approx. 4 m Total height of crane approx. 4.64 m Top of running rails approx. 4.4 m Bottom of running rails approx. 4.15 m Hook height approx. 3.2 m Base plates at the supports approx. 40 x 40 cm. System is delivered complete: Steel structure/supports made of HEB160 (embedded approx. 10 cm), running rails IPE300 incl. power rail/power supply. 1x single-girder crane with 2000 kg Demag PK10 chain hoist with floor control. Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection by appointment only.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: TD2002/0364, DEMAG KBK overhead crane, span approximately 8x4m – expandable upon request!! Load capacity / lifting capacity 500 KG – 0.5 tons Technical data of the system: Djdpfx Asz Tc Nqeqvecp Overhead crane with Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, supports/hangers, etc. incl. Dalmec manipulator PFS 80KG NL Articulated boom, rotatable 360 degrees, with an outreach of approximately 3m Crane is dismantled and immediately available Very good condition, see pictures Item location is 75053 Gondelsheim Shipping via freight forwarder or collection only by appointment Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125KG - 1600KG Please request your overhead crane with the required load capacity and dimensions.

Condition: ready for operation (used), Year of construction: 2019, Demag KBK overhead crane, crane system, crane, chain hoist Inspection report available! Manufacturer: Demag Load capacity: 1000 kg Year of manufacture: 2019 Length: approx. 24 m Width: approx. 5.90 m Track gauge: approx. 5.70 m Chain hoist: Manufacturer: Demag Type: DC-Com 10 1000 1/1 H4 Year of manufacture: 2019 Load capacity: 1000 kg Fine lifting speed: 1 m/min Main lifting speed: 4 m/min Hook travel: 4 m You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! Dodpfxs Ah Rtxs Aqvecp You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht Dodpfx Aqsh Nv Itsvocp

Condition: excellent (used), DEMAG hub motor for lifting unit DH1000 / DH1200 Dcodpfev Uvdiex Aqvsp Type KBH160 B4 In excellent, refurbished condition, original price €15,741.00 Several units in stock Individual parts also available, both new and used Significantly below the manufacturer's original price.

Condition: excellent (used), Year of construction: 2008, DEMAG SYSTEM 800/1120-9500 injection molding machine + DEMAG ERGOTECH DR743 robot Year of manufacture: 2008 | Clamping force: 800 tons | Demag Ergotech DR743 linear robot Hydraulic Demag System 800/1120-9500 injection molding machine from 2008, equipped with an integrated Demag Ergotech DR743 linear robot for automatic part removal. TECHNICAL SPECIFICATIONS 1. BASIC DATA Manufacturer: Demag Model: System 800/1120-9500 Year of manufacture: 2008 Machine type: hydraulic injection molding machine for processing thermoplastic materials Clamping force: 8000 kN (800 tons) Injection unit: 9500 Equipment: integrated Demag Ergotech DR743 linear robot 2. CLAMPING UNIT Clamping force: 8000 kN (800 tons) Dimensions of mounting plates: 1620 × 1500 mm Column spacing: 1120 × 1000 mm Minimum mold height: 500 mm Maximum mold height: 1050 mm Maximum distance between plates: 2080 mm Mold opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mold weight: 7200 kg 3. INJECTION UNIT Injection unit type: 9500 Screw diameter: 130 mm Injection volume: 7300 cm³ Injection weight (PS): 6640 g Injection pressure: 1300 bar Dedps Af Nhfofx Aqvjcp Screw length-to-diameter ratio (L/D): 20:1 4. DEMAG ERGOTECH DR743 LINEAR ROBOT Identification data Manufacturer: Demag Ergotech Model: DR743 Type: DR743-42141000 Year of manufacture: 2008 Serial number: W743-0277 Robot type: linear, designed for automatic part removal Integration with injection molding machine: yes Robot travel ranges X-axis: 1200 mm Y-axis: 2600 mm Z-axis: 3000 mm Electrical and mechanical parameters Supply voltage: 400 V Rated current: 18 A Connected power: 12.5 kVA Robot weight: 750 kg 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l 6. MACHINE DIMENSIONS AND WEIGHT Length: 12,300 mm Width: 2700 mm Height: 2700 mm Main unit weight: 33,500 kg Accessory weight: 9700 kg Total weight of main unit and accessories: 43,200 kg