Used Camlock for sale (147)

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: with driving pin -Outside: Ø 192 mm -Camlock cone size: 6 (106 mm) -Bolt circle: 2 x 160 mm bolt diameter 18 mm Tedpfsduacqox Ahuof -Weight: 6 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 270 -Cone: Ø 139.7 mm -Camlock recording Tedodu Ufvepfx Ahuof -Weight: 13 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening Todpfx Aexuflfshusf -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm Tsdev Tlryepfx Ahujf -Total weight: 9.6 kg

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange Todpfx Ajt Sz Evohusf -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø350 x 90 mm -Weight: 19 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool Tsdpfxotxklye Ahusf -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Condition: excellent (used), functionality: fully functional, center height: 165 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, total height: 1,350 mm, total length: 1,850 mm, total width: 700 mm, 3 Phase 400V motor is running fine! Left & right running. Geared headstock, gears running in oil. 12 spindle speeds adjustable from 45 up to 2000 RPM. Metric lathe. Tjdpfx Aoxzu Ivehusf Norton gearbox for easy thread cutting. Dickson quick-change toolpost with a total of 4 tool holders. Power feed both longitudinal and cross directions. D1-3 camlock spindle. Foot brake pedal. Induction hardened bedways. MT3 tailstock taper. Distance between centers: 1050mm Center height: 165mm Spindle bore: 35mm Overall dimensions: 185x70x135cm Made in the UK. Very good overall condition! Includes all accessories as shown in front of the machine in the pictures. Contact us for shipping options! € 3,450.00

Condition: excellent (used), Face plate and clamping disk (2858) Diameter 440 mm Todpstup Trsfx Ahuof Camlock mounting 133.4 Cone diameter 106.39 Height of face plate 50 mm Weight 28 kg

Condition: new, Distance between centers 2000 mm Tjdpfx Aexu Errjhuef Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Maximum cutting length 1080mm Swing over bed 480mm Swing over cross slide 257mm Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Tailstock quill taper No. 5 MT Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm Todpfx Ahext E Nnoujf MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: used, TRAK / XYZ SLX 355 is a CNC turning lathe of high precision, engineered for superior accuracy and reliability. It features 2 axes, centre height 360 mm, distance between centres 1000 mm and centre height over slide 225 mm; spindle hole 52 mm; Z travel 1000 mm and X travel 190 mm. Rapid traverse Z 4 m/min, X 3 m/min; spindle speeds 50–1410 and 100–4000 rpm. Spindle nose D1-6 Camlock and Morse taper MK4. Delivers tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool applications. Tedpfoxx U Dxox Ahusf

Condition: new, The Basic Plus is a versatile Conventional Horizontal Lathe within the Metal Lathes product group, designed for single part production. Its robust construction ensures precision, making it an ideal choice for repair shops, training institutions, and various workshops. The Basic Plus features hardened and ground headstock gears, a Camlock D1-4" mount with a bore diameter of 38 mm, and adjustable tapered roller bearings for improved functionality. With a compact design and a small footprint, this lathe offers an array of standard equipment including a quick change tool holder and a 3-axis position indicator. Taper turning is facilitated with a movable tailstock, and the robust cast-iron bed provides stability during operation. Explore the extensive selection of optional accessories to fully customize your lathe experience. Order online to elevate your workshop capabilities with KNUTH's high-quality machinery. Tedpsu Rc Htsfx Ahuef

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Tsdoxx S R Aspfx Ahujf Year of manufacture: 2007 with CE mark 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing over bed: Ø 340 mm Swing over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Compound slide length: 410 mm Compound slide width: 150 mm Bed slide guide length: 380 mm Tool section: 20 x 20 mm Distance spindle centre – compound slide: 34 mm Compound slide (support) swivel range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40 - 3,000 rpm Infinitely variable speed adjustment Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (basic equipment): 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Permissible workpiece weight (between centers, unsupported): 50 kg, supported with tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training purposes. Equipment: - EMCO 3-axis digital display with color screen - Potentiometer - Emergency stop button - Digital speed display on control panel next to digital readout - 3-jaw chuck - MULTIFIX tool post, size B - Electrically interlocked chuck guard - Quick-action collet chuck - MICROJET coolant spray unit - Chip guard rear panel - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility Available from March 2026

Condition: good (used), Year of construction: 2010, Conventional lathe, center high 254 mm, between centers 1000 mm, bore Ø 80 mm, 12 speed 30 - 2200 rpm, motor 5,5 kw, camlock 6'', dimensions 230x115x165 cm, weight ca. 1750 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck Ø 250 mm, rotating pin, tool post MULTIFIX C with toolholders, steady and following rest Tsdpfxstv Iy Ee Ahuef

Condition: new, rotational speed (min.): 25 rpm, rotational speed (max.): 1,500 rpm, Distance between centers 1000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Tjdpfxsxu Enyj Ahuef Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder Todpfexd D Rfex Ahuof The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Todpfxsxcuazo Ahuof Technical data: >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: ready for operation (used), Year of construction: 1993, turning diameter over bed 400 mm turning diameter over slide rest 210 mm turning length 1060 mm centre height 200 mm spindle bore 58 mm spindle taper: Camlock D 1-6 Drive 3,2/4,9 kW spindle turning speed range 16, von 55 bis 1600 U/min feeds - longitudinal 0,039-0,541 mm/U feeds cross 0,019-0,271 mm/min. weight of the machine ca. 1,45 t dimensions of the machine ca. 1900 x 870 x 1700 mm High-quality machine with induction-hardened guideways, torsionally rigid bed, main spindle made of chrome-nickel steel, surface-hardened and ground gears, automatic circulating lubrication in the spindle housing, slip clutch in the support, bed lubrication via hand pump, Siemens electrical system. Thread feeds for metric, inch, module, and diametral pitch. 3-axis digital readout: 2 scales are mounted, the scale on the top slide has been replaced but still needs to be mounted. The display unit is for lathes and therefore, with the appropriate setting, adds the slide travel to the top slide travel. The machine was only used in a prototype workshop for sporadic applications. Tjdpfxsxtfx Ao Ahujf Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2024, Manufacturer: Optimum Year of manufacture: 2024 Condition: as new, workshop-tested Delivery time: immediately available Technical Specifications Centre height: 165 mm Centre distance: 830 mm Swing over bed: 330 mm Swing over cross slide: 208 mm Turning length in bed gap: 430 mm Spindle speed range: 16 steps, 70–2000 rpm Drive motor: 1.5 kW, 400 V, 50 Hz Spindle mount: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Tedpfxjxyknij Ahujf Spindle taper: MK5 Tailstock taper: MK3, quill travel 110 mm Weight: approx. 512 kg Machine dimensions (L×W×H): 1685 × 745 × 1590 mm Feeds and Thread Cutting Metric: 0.4–7 mm/rev (26 pitches) Imperial: 56–4 TPI (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Cross feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed steady rest (Ø 6–50 mm) Travelling steady rest (Ø 8–30 mm) LED machine lamp Reducing sleeve MK5/MK3 Two fixed centre points MK3 Four-way tool post 16 mm Change gear set Machine base Initial fill with quality oil Operating tools

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm Todpfx Ahjxu Em Aeujf If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Tedpfjxu Ei Rox Ahujf

Condition: new, Distance between centers 1000 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Todexu Ef Sspfx Ahuef Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,970 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,700 mm, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Tjdpfxjxu Effj Ahuef Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,720 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,200 mm, Distance between centers 1000 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Todpfxsxu Ed Uo Ahujf Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,775 kg, total height: 1,320 mm, total width: 850 mm, total length: 2,450 mm, Spitzenweite 1500 mm max. Schwenkbereich über Bett 410 mm max. Schwenkbereich über Schlitten 255 mm max. Schwenkabstand 580 mm Spindelbohrung 52 mm Spindelkonus Camlock D1-6 Tedexu Edbjpfx Ahuof Spindeldrehzahl 1: 30 - 550 1/min Spindeldrehzahl 2: 550 - 3000 1/min Verfahrweg Querschlitten 225 mm Verfahrweg Oberschlitten 100 mm Bei jeglichen Fragen zur Maschine, sowie einer Terminierung zur Besichtigung, bitten wir Sie uns einfach telefonisch oder per Mail zu kontaktieren. Schauen Sie sich gerne unsere anderen Anzeigen an, um einen vollständigen Überblick über unseren Lagerbestand zu erhalten.