Keyboards

Demag Demag IBED Ergocontrol, 4 MB, NC4, IBED 70380065

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Duedpfx Akjrgw Exeksw Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Duodpfsqvuigsx Akkew Demag spare part panel

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Duodpfx Ajr Avfnjkkew Closing 35 tons Year of manufacture 2003

Condition: ready for operation (used), Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible. Dodpfx Akewaa H Dokeuw

Condition: excellent (used), Year of construction: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture: 2004 System: Fully hydraulic Control: MC4, color monitor, integrated control panel, built-in disk drive 2. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mold opening force: 220 kN Moving platen force: Opening: 105 kN Closing: 95 kN Platen dimensions (h × v): 1060 × 1095 mm Tie bar clearance (h × v): 710 × 710 mm Mold opening stroke: 920 mm Mold height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Dedpfx Akex Elukskouw Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Injection volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Standard throughput: 108 g/s Increased throughput: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of barrel heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Steel bar shears make Schubert, type STS 100 Used, very good condition Technical data: Shearing force/diameter (max.): 1000 kN/52 mm Drive power: 11 kW Dsdpfx Ajtukqqokkjuw Equipment/special features: bar magazine, 6 m, length stop 650 mm, safety device

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Dsdjr Igtyopfx Akkjuw Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DEMAG System 1500/1500-16000 Injection Moulding Machine Dedpfxeww Idle Akkouw Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the German brand Demag, model System 1500/1500-16000, equipped with a robot and additional equipment. The machine is in very good technical condition, regularly serviced, complete, and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Mounting platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie-bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (for PS): 9,880 g Injection pressure: 1,454 bar Electrical-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture: 2008 Safety enclosure Conveyor belt (product conveying) The machine is ideal for processing large technical mouldings. Perfect for serial production, with the possibility of full automation thanks to the installed robot and part removal system.

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm Duodpjwvkggefx Akksw injection shot weight in Polysterol: 149 g/PS closing pressure: 100 kN

Year of construction: 2024, condition: new, NEW , NEVER USED Demag Panel NC3 MAde in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 398-0DE14 Duodpfx Asuz Uq Eekkew