Used Deflector Hood for sale (1,297)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Nsdjzlktpspfx Abyodc Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; Ndodpfjy Hixvox Abyjc • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Extendable saddle rack, High entry door, Door-ramp combination Equipment: - Full aluminum body - EquiGuard - Extendable saddle rack Net: €11,252.10 / Gross: €13,390.00 Item number: HAPO27111110.01 Technical data: • Brand: Humbaur • Model: Areion Pro • Vehicle type: Horse trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 354 x 171 x 240 cm • External dimensions (L x W x H): 492 x 225 x 290 cm • Loading height of the floor: 45 cm • Permissible total weight: 2,700 kg • Tare weight: 1,137 kg • Payload: 1,563 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/65R15 • Suspension: EquiDrive® suspension • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Front in aerodynamic ribbed design • Two-color LED strips (blue/white) for optimal light distribution in the interior • Adjustable hay rack holders • Extra-long ramp with tread rubber and side stop • Sturdy, hot-dip galvanized rear portal for better visibility to the rear • Door to the interior with full passage height • Rear door can be rotated and swivelled • Sliding side windows • EquiDrive® suspension • Incl. wheel shock absorber + 100 km/h approval • Alu-BiComp floor 21 mm (aluminum floor) • 8 mm thick rubber floor glued and sealed • Body made of double-walled, anodized aluminum profiles • Solid, all-round and galvanized frame profile • Large entry door with 3-point locking • Tinted opening windows at the front • Automatic support wheel mounted in the center with maneuvering handle • Poly hood in color • Exclusive wind deflector for draught-free interior ventilation • Tires suitable for 100 km/h (only in Germany) • Tie-down option outside • Tie-down option inside • Divided breast and rear bars, breast bars with panic release • Depth adjustment for box bars • Breast and rear bar continuous, height and length adjustable • PVC clear partition • EquiLock® lockable partition • Side step protection, plastic, black • Side padding, mounted on the left and right, with logo • Wear mat at the front • EquiGuard® panic release • Lockable saddle compartment with saddle and bridle holders, feed troughs, mirror and storage net • Tandem mudguards, plastic (black) • Lifting device, gas-pressure shock absorbers on the rear door • Step on the rear door • 13-pin plug with reversing and fog lights • Full-LED rear lights & exterior lighting • License plate holder: 340x200mm (2-line) _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Ndsdpfx Abozy Daloyec Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Year of construction: 2018, condition: as good as new (ex-display), Quiet running, maintenance-free motor Njdpfx Ajiiyuqobysdc Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit Also other models available from stock! Inquire about the current stock.

Year of construction: 2019, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A Nedpfsiiyq Hsx Abysdc 1 grinding wheel each coarse and fine Also other models available from stock! Inquire about the current stock.

Condition: excellent (used), Year of construction: 2016, Ref: 11070 . 2016 ‘Heidelberg’ Stahl TH82/644-PFH Folding Machine High performance all buckle folding machine with auto setting (no sound hoods). Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. Ndedpfsyk H H Rsx Abyoc • Digital microprocessor control with self-learning function for signature length & spacing with run monitoring, total and batch counter with memory. • Touchscreen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • VSA 56 vertical stacking delivery. Including compressor, tools, spares & manuals. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 52cm with 4 plates, perforating/scoring shafts Gate fold attachment Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Nsdpfx Aoiiyr Sjbyjdc Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, fits the CMP, SCC 61/101 electric combi-steamers from the production year 2011 to the latest model series (Index H + I); this hood is no longer suitable for the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. The hood has a few dents, see photos, but this does not affect its function in any way. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance type? Ask us, we have access to a large range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and carries away vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17125022437 Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Ndsdpfx Aj Aa I E Ajbyec Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CMP, SCC 61/101 electric combi-steamers from the model year 2011 up to the latest series (index H + I). This hood is no longer suitable for the iCombi series. The hood has undergone an inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance model? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes steam and vapors. Extensive measures for exhaust system installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17035018272 Year of manufacture: 2017 Ndodpfx Abe Adprxjyec Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like a consultation or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 am to 1:00 pm and from 2:00 pm to 5:00 pm. Sales are made exclusively according to our general terms and conditions (GTC).

Year of construction: 2014, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CMP, SCC 61/101 electric combi-steamers from model year 2011 to the latest series (index H+I); this hood is no longer compatible with the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational service partner throughout Germany. Are you looking for a specific Rational appliance type? Ask us – we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Professional overhaul/inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and removes steam and vapors. Extensive measures for exhaust system installation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UD14085007483 Year of manufacture: 2014 Type: 60.72.320 Ndjdpfe Aa Na Uox Abyec Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Year of construction: 2020, condition: refurbished (used), Dear customers, To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Ndsdpfeftb Ebex Abysc Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: refurbished (used), functionality: fully functional, total length: 7,350 mm, total width: 2,200 mm, total height: 2,985 mm, power: 120 kW (163.15 HP), conveyor belt length: 6,000 mm, conveyor belt width: 600 mm, temperature: 230 °C, We offer this fully refurbished Alco AGU 6000-600-E. Oven length: 6,000 mm Belt width: 600 mm Overall length: 7,350 mm Overall width: 2,200 mm Heating capacity: approx. 120 kW: 2 x 60 kW (2 baking zones) Air temperature: approx. 80 – 230° C Baking time: 4 - 25 min. - adjustable Frequency inverter: SEW Eurodrive • Product is baked using hot air and steam • Two baking zones with circulating hot air Ndsdpfjzzmltex Abyjc • Fans direct the air to the heating elements in the center • Air deflectors guide the hot air onto the product • Baking process optimized by steam injection • Continuous cleaning of the conveyor belt with brushes and water nozzles • A chimney with a throttle valve is located at the product inlet and outlet • Water seal prevents lateral steam leakage when the hood is lowered Revisions: - New belt - Wear parts inspected and replaced if necessary - New motors for fans - Other motors refurbished - System function tested If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2020, operating hours: 3,182 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10465394, MEIKO M-iClean HXL-PW – Double-basket hood dishwasher including stainless steel infeed and outfeed tables with basket guidance. Premium class, from the ongoing operation of an event venue. Outstanding key data according to the machine display: only 3,182 operating hours and 23,991 cycles – exceptionally low for the year of manufacture (screenshot in the images). Commissioned on 27.02.2020, serial number 10465394, software version 6.4.6. Equipment: Double-basket system 2 × 500 × 500 mm, up to 120 baskets/hour; PowerWash with multiple pump power levels; hood automation with automatic basket recognition; detergent and rinse aid dosing; drain pump; free passage height 505 mm; including infeed table with roller conveyor and outfeed table; connection 400 V. Ideal for event venues, catering, canteens, hotels, or large kitchens. Inspection and test run on-site are possible and desired. Commercial sale with a proper invoice (VAT shown). Collection/dismantling by arrangement. Ndodpfeznd U Sjx Abyec Price: €9,900 fixed price, plus VAT.

Year of construction: 2021, condition: used, functionality: fully functional, This is a Hobart Premax AUPT-10B double-basket hood-type dishwasher, manufactured in 2021. It includes a matching supply and drain table. First commissioning: 07/11/2023 / Operating hours: 1450 / Washing cycles: 30008 This premium double-basket hood-type dishwasher offers double the capacity for simultaneously washing two baskets. The PERMANENT-CLEAN dirt removal system removes coarse dirt into an external filter. This saves operating costs and protects the machine. To ensure that hygienic final rinse temperatures are reached even when connected to a cold water supply, the machine has an automatic program time extension. For corner installations, we recommend that the right side of the machine is accessible for maintenance. We recommend water treatment for water hardness of 1°dH or higher. The machine has undergone a thorough inspection in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. The original list price of the machine with this equipment at the time of purchase was: €37,570.00 (gross). Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1345 x 915 x 1510 mm (+200 mm PERMANENT CLEAN system) Supply/drain table each 1200 mm Height with hood open: approx. 1995 mm Power connection: V: 400 / kW: 22.5 / A: 36.1 / Hz: 50 Weight: 252 Serial number: 867206655 Year of manufacture: 2021 Condition: used, major inspection carried out, fully functional. Further information: Basket size: 500 x 500 mm Tank capacity approx. 80 liters Ndsdpfx Ajzmttujbyjc Water consumption approx. 1.4 L/basket Insertion height 440 mm Capacity up to max. 140 baskets/h, 2520 plates/h, 5040 glasses/h 8 automatic programs: Short, Standard, Intensive, Eco, Continuous wash, Cutlery, Hygiene and Heavy-duty programs. Program duration: 52/70/170/180 sec. and special programs Heat and sound insulated hood Multi-setting: The heating capacity can be reduced on-site from 12.4 kW to 6.2 kW when connected to a hot water supply. Self-cleaning program Filter contamination sensor USB interface for exporting operating and hygiene data Completely ready for connection: Supply and drain hoses, connection cable, liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Hood, tank, frame, wash arms and housing made of CrNi steel 1.4301 4 plate baskets P-18-12, 1 universal basket C-01-07 Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), 1 x Conveyor with extraction hoods Ndjdpfx Asz Dbpvjbysc 4m long and 60cm wide.

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Nodpfxezzlnto Abyjdc Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: excellent (used), functionality: fully functional, power: 30.16 kW (41.01 HP), color: green, fuel: diesel, Year of construction: 2021, operating hours: 360 h, Equipment: all wheel drive, car registration, Roberine F3 base machine with the following features: Engine: 3-cylinder Yanmar turbo diesel engine 30 kW (41 hp) at 2650 rpm Displacement 1500 cm³ Fuel tank 45 liters – sufficient for a full day’s work Speed: Mowing: Forward 13 km/h Reverse 9 km/h Transport speed: Forward 25 km/h Reverse 9 km/h STANDARD EQUIPMENT: 12V socket Cruise control Command arm Weight transfer system Standard delivery with a maximum speed of 20 km/h Traction and Drive Drive: Automatic hydraulic four-wheel drive (Drive by Wire) Mowing system: Hydraulic axial piston pump for the mowing units Hydraulic tank: Capacity 55 liters with oil level sight glass Tires, Brakes and Steering Front tires: Vredestein Greentax Turf 320/55 – 12 (26x12-12 8 PR) Rear tires: Vredestein Greentax Turf 250/50 – 10 (20x10-10 6 PR) Braking system: Maintenance-free hydrostatic braking system Parking brake: Maintenance-free disc parking brake on the front wheel motors Steering: Fully hydraulic rear-wheel steering including adjustable steering column Track width 150 cm Seat: Standard fully adjustable, comfortable air-suspension Grammer seat with automatic weight adjustment and control lever Indicators: Dashboard warning lights: Battery, engine oil pressure, cruise control, turn signals, low fuel level in tank, coolant and hydraulic oil temperature Indicators: Fuel level indicator, hydraulic oil level sight glass, digital hour meter Weight and Dimensions: Overall length: 280 cm Height: 234 cm with ROPS / 166 cm with ROPS folded down Overall weight without cabin: 1225 kg with ROPS Certifications F3 and R3: Certified according to CE Machinery Directive, protective device on the front of the two front flail mowing units ISO 17101-2, certified according to ISO 21299 for ROPS, STVZO-TÜV Ndsdpfx Aszhkk Tebyec With the following options: MOWING UNITS ROBERINE F3 Number of mowing units: 3 independent, hydraulically driven flail mowing units through axial piston motors 3500 min-1 Mowing unit configuration: Fixed flail mowing unit with 12 flails Diameter 25 cm Equipped with a 3" support roller Mowing width: Variable 77 cm – 215 cm Height adjustment: 25 mm – 85 mm Weight transfer system: Electrically operated for better traction through weight transfer from the mowing units to the wheels ROPS frame Set, reversible fan Reverse fan for optimally clean ventilation grille in the hood Set, deflector Set, lighting kit (required for STVZO) Set, rotating beacon (frame) Set, protective covers for cutting units (required for road travel) Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Year of construction: 2019, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combination steam ovens, including the connection kit, is suitable for the CM, CMP, SCC 61/101 electric combination steam ovens from the model year 2011 up to the i Combi series. (This hood is no longer suitable for the current i Combi series). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and removes vapors and fumes. Elaborate measures for exhaust system installation are a thing of the past. An external connection is no longer necessary. Installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE19095037107 Year of manufacture: 2019 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Ndsdpfx Aboz Ahbreyjc Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: EF2UA23105068402, This is an UltraVent condensation hood from the premium manufacturer Rational, type UV 202E. This hood can be used with iCombi appliance sizes 20-2/1 in an electric version. Thanks to the condensation technology, the UltraVent binds escaping vapors. An external connection or the extension of an existing exhaust system is not required for this recirculating hood. The hood has been inspected in our in-house workshop and is fully functional. The stated price is the gross price, including 19% VAT. The recommended retail price for this hood is €7,233.00 net. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our appliance service for you: 6-month warranty on all electrical parts High-quality branded appliances at fair prices Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: External dimensions WxDxH: 1084x1134x337mm Electrical connection: 1NAC 230V 50Hz 0.16kW Serial number: EF2UA23105068402 Year of manufacture: 2023 Njdpfxjzu R Ufo Abyodc Maximum extraction rate: 705 m3/h Operating noise: Average: 50-65 dB(A) Condition: Used, inspected, and fully functional. SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC), which can be found at the link "Legal Information".

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: EF1UE15115012228, This is an UltraVent hood from the premium manufacturer Rational, type UV 201/E, suitable for the combination steam ovens SCC, CMP 201 from 10.2011 to the current model series (index H and I), including the connection kit. The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Service: We can gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device type? Ask us, we have access to a comprehensive range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: * 6 months warranty on all electrical parts * High-quality brand-name equipment at fair prices * Professional overhaul/inspection & expert cleaning, tested & fully functional - or your money back * Flexible shipping or self-pickup options * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts, inspection according to DGUV V3 This UltraVent hood features patented condensation technology, which captures and removes vapors and fumes. Complex measures for exhaust air installations are a thing of the past. An external connection is no longer required. Installation is simple and can be done at any time, even retroactively. Ideal for use in small kitchens, in sales areas of butchers, bakeries, snack bars and catering services. Technical data: * W x D x H: approx. 886 x 1226 x 450 mm * Power connection: V: 230 * Serial number: EF1UE15115012228 * Year of manufacture: 2015 Further information: * Integrated lighting * Exhaust air capacity: approx. 1000 m3/h Condition: used, fully functional Shipping: * Delivery or self-pickup by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Njdpfozu Sbtjx Abyodc Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), mileage: 573,240 km, power: 184 kW (250.17 HP), first registration: 06/2010, color: other, gearing type: automatic, emission class: euro5, number of seats: 2, Equipment: crane, tail-lift, Crane Number of hydraulic extensions: 2 Remote control: ✓ Rotator: ✓ = More information = Year of construction: 2010 Empty weight: 11.303 kg Carrying capacity: 7.697 kg GVW: 19.000 kg Tail lift: tail lift Crane: Palfinger PK12080 RADIO REMOTE!!, year of manufacture 2000 Technical condition: very good Visual appearance: very good Damages: none = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel Njdpfxszuc Aus Abyjdc The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Year of construction: 2025, condition: used, functionality: fully functional, machine/vehicle number: ET1UA25015078612, This is an Ultravent hood from the manufacturer Rational, type UV 61/101/E, 60.75.134, manufactured in 2025. It is suitable for iCombi classic and iCombi Pro appliances. The hood has been inspected in our in-house workshop and is fully functional, including the matching connection kit. The list price of the hood is: €4,465 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new items. We will be happy to advise you on all appliance types. Our used appliance service for you: Nsdpfx Abey N Umwjysdc * 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs * High-quality branded appliances at fair prices * Professional overhaul/inspection & expert cleaning * Inspected & fully functional – or your money back * Flexible shipping or self-collection options * Competent advice – before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 854 x 885 x 313 mm * Power connection: V: 230 / Hz: 50-60 * Article number: 60.75.134 * Serial number: ET1UA25015078612 * Year of manufacture: 01/2025 Condition: Used, inspected, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 with an Acoustic Hood The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. Ndjdsxhdynepfx Abyoc The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Condition: used, Year of construction: 2019, operating hours: 25,600 h, 1 Skoda production line, manufacturer: STEPP GmbH & Co. KG, year of construction: 2019, mains connection: 400V, 50 Hz, nominal pressure: 6 bar, dimensions (L x W x H): 12m x 8m x 2.6m, weight: 16 t, enclosed robot cells, the system is used for the production of hood hinges for Skoda vehicles, raw material is transferred and riveted between different stations, 4 robots, manufacturer: Yaskawa, type: 2x YR-HP20R-B2C, 1x YR-HP20-B00, 1x YR-1-06VX7-A00, machine hours: 25,600, average utilization: 85%, last documented maintenance: 02/12/2025, the system is generally operational, rework has been carried out. Ndeds Aaxgdjpfx Abyec

Condition: used, functionality: fully functional, Leventi Slim 2306 with recirculating hood, 400V. Nodpfx Aszg Dwqobyjdc - 5 units in stock - Price per unit = €1950 - If you purchase 2 or more ovens, the price per unit is reduced to €1750.