Used Deflector Hood for sale (1,362)

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Dwodpfeymazasx Adgob

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm Dsdpfx Adezx Urcjgewb steam hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A with lecithin bath steam connection DN 40 suitable for CIP cleaning system outside dimensions (l x w x h) : ± 8.800 x 2.000 x 3.200 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables Dwodpjzx Unwjfx Adgjb New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: used, functionality: fully functional, mileage: 194,358 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Djdpfxszy Uxlo Adgjwb Driver comfort Seats: regular Beds: regular I-ParkCooling : Without Parking heater (Webasto): 1.8kW Air to air Fridge: 33 litre under bunk mounted fridge / freezer with dividers Air conditioning: Electrically controlled air conditioning with sun sensor Driver attention support: Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Advanced Emergency Brake System Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Volvo Extended Front cab: PART OF AERO CAB Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Headlights Automatic - LED headlights Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 7 mm Front right - 7 mm Rear left inner - 6 mm Rear left outer - 7 mm Rear right inner - 6 mm Rear right outer - 7 mm

Condition: used, functionality: fully functional, mileage: 287,094 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Dwjdpfx Aszy Uxfodgjb Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 9 mm Rear left outer - 7 mm Rear right inner - 8 mm Rear right outer - 12 mm

Condition: used, functionality: fully functional, mileage: 325,074 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Dwjdpfx Adjzy Uw Ujgeb Cab side air deflector - long tractor Tyres Information Front left - 8 mm Front right - 10 mm Rear left inner - 12 mm Rear left outer - 11 mm Rear right inner - 10 mm Rear right outer - 11 mm

Condition: used, functionality: fully functional, mileage: 252,750 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,177 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Globetrotter XL Single energy battery system (2 batteries) NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR I-shift Automated 12-speed - GCW 60 tonne Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor Comfort 4: suspended - belt in seat Dodpfx Aezy Uw Isdgswb Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm Lower bunk 815mm wide in the centre 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21R22.5 Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive axle ratio: 2.31:1 610 LITRE, RIGHT SIDE FUEL TANK 610 LITRE, LEFT SIDE FUEL TANK 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Fleet Management System gateway - required for telematics and Dynafleet dealer fit. Exterior LED headlamps V-shaped Front fog lights - white Static corner lights - works with indicator at low speed to light up direction Roof air deflector Cab side air deflector - long tractor Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 12 mm Rear left outer - 4 mm Rear right inner - 12 mm Rear right outer - 12 mm

Condition: used, functionality: fully functional, mileage: 401,809 km, power: 338 kW (459.55 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist Tyres Information Front left - 9 mm Front right - 9 mm Rear left inner - 8 mm Dwodpfx Ajzy Uh Hjdgeb Rear left outer - 8 mm Rear right inner - 7 mm Rear right outer - 8 mm

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Dwjdpfx Aszxn I Redgjb Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: new, functionality: fully functional, mileage: 1 km, power: 14.7 kW (19.99 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 2,420 kg, empty load weight: 2,420 kg, operation weight: 2,420 kg, lifting height: 4,300 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, air conditioning, cabin, hydraulics, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving operations requiring excellent working range, high digging force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation tasks, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator features a 0.09 m³ bucket with a width of 460 mm. The bucket digging force of 17.6 kN allows for efficient excavation, even in tougher soils. The maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a wide working range without the need for frequent repositioning. A digging height of up to 4510 mm and a dumping height of 2760 mm enable easy loading of materials onto transport vehicles. Dimensions and Stability The overall machine dimensions are 4010 mm in length, 1540 mm in width, and 2360 mm in height to the top of the cab (1380 mm to the top of the boom). The track contact length of 1530 mm and a track width of 1510 mm ensure stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow safe working on less solid surfaces. Mobility and Maneuverability A tail swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a track length of 1895 mm provides excellent traction and safe operation. Djdpfx Aeymtdnjdgjwb Technical Specifications Operating weight: 2420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2200 rpm Max. hydraulic system pressure: 18 MPa Max. gradeability: 30° Ground pressure: 35 kPa Max. travel speed: 2.5–3.5 km/h Max. tractive force: 16 kN Max. slewing speed: 11 rpm Max. digging force: 15 kN Max. digging height: 4300 mm Max. dumping height: 2530 mm Max. digging depth: 2550 mm Max. digging radius: 4150 mm Digging radius at max. height: 2700 mm Minimum radius: 1800 mm Boom length: 1950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3950 mm Overall width: 1400 mm Overall height: 2300 mm Minimum turning radius: 790 mm Track length on ground: 1870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1330 mm Engine hood height: 1350 mm Platform height above ground: 480 mm

Condition: used, all stainless steel Dedpfx Adszxdn Tegowb electrically heated heating separately adjustable in two areas adjustable speed belt width 600 mm hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A suitable for CIP cleaning system with extra infeed en outfeed conveyor outside dimensions (l x w x h) : ± 9.500 x 1.900 x 3.700 mm

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height: approx. 10 - 60mm Feed rate: approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for simple machine operation 4 programs can be saved. Machine in Highflex version, highly automated, changing from thin edge to thick edge via programs Components: Extended infeed zone Chain track central lubrication, pneumatic-manual Glue pot quick-change device, one glue pot currently available Upper pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with diamond cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge infeed for strip material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cut or chamfer cut (program-controlled) Combination milling unit, pneumatically controlled for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Dwjdpfxezzqwmo Adgeb Glue seam trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400kg. The machine can be demonstrated on-site upon request and after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height Dwodpfx Aszwxy Isdgjb - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles Dodpfxjhp S Tro Adgswb fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch Dwodpfx Ajt U Scwedgob - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: used, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm Djdpfxet U Sc Ds Adgewb bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws Dwodpeulnb Dsfx Adgob - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) Dsdpekm Rynofx Adgowb - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard Dwjdpfx Aozl E T Djdgob - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 72.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Dwsdpfxjxab Ako Adgob Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm Dedpfxexabtij Adgjwb total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces Dodpexabf Eofx Adgjwb - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle Djdoxabp Depfx Adgowb - Separate off button - Machine base

Condition: new, width of the strips 75.0 mm band length 2000 mm Dwodexaarqopfx Adgeb band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping Dodpexabzyefx Adgewb - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086