Used Defective for sale (1,086)

Condition: used, Rear axle, front axle, steering axle -Manufacturer: Baumann, steering axle from side loader -Type: unfortunately without a type designation -Tire size: 10.00 R20 / 1 tire defective -Individual components/dimensions: see photos Bedpfx Aozi Scmja Isdh -Price/Fee: complete -Dimensions: 1000/2600/H1000 mm -Weight: 670 kg

Condition: used, functionality: fully functional, machine/vehicle number: FN 62xxxx, Year of construction: 2020, operating hours: 4,510 h, load capacity: 1,500 kg, lifting height: 3,000 mm, free lift: 1,405 mm, fuel type: electric, mast type: duplex, construction height: 1,970 mm, fork length: 1,100 mm, empty load weight: 2,918 kg, total length: 1,785 mm, drive type: Elektro, construction width: 990 mm, Electric 3-wheel forklift Chassis number: FN 62xxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Non-marking Front tire size: SE 18x7-8, non-marking Rear tire type: Non-marking Rear tire size: SE 18x7-8, non-marking Battery voltage: 24V Battery Ah: 920Ah Battery manufacturer: Hoppecke Bdodpozq Ia Dofx Aa Ish Battery type: PzS Battery year of manufacture: 2020 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, no warranty/liability for defects Side shifter, attached with couplings 3rd valve, work light rear, work light front, impulse control, full free lift, rear spotlight, tail lights and turn signals, flashing beacon, Solo-Pilot (single lever), 2 panoramic mirrors, non-marking tires, under 2 meters in height (special construction), battery (04/2020) with Aquamatik, external charger included.

Condition: used, functionality: fully functional, volume flow: 250 m³/h, Used, fully functional pump unit/pump combination from Edwards, consisting of a rotary vane pump E1M40 (40 m³ pumping capacity) and a roots pump EH250 (250 m³ pumping capacity), as well as the corresponding solenoid shut-off valve. Both pumps were in combined operation until they were removed and were installed in an industrial plasma nitriding system, achieving a final pressure of approximately 20 Pa. Bodpozwdvzjfx Aa Ijdh The pumps are sold as a package. However, individual sales are also possible by arrangement. The pumps can be inspected and collected on site. Shipping via a freight forwarder is possible by arrangement and at the buyer's expense. Sale is subject to exclusion of liability for defects and warranty.

Condition: new, Year of construction: 2026, Robust guardrail package for double row (2 x 1,100mm) External dimensions: 2,550mm, including mounting material 1 x center support base 2 x Z-profiles Bodpfozux A Rsx Aa Iodh 2 x U-impact guards SIGMA PROFILE as guardrail Year of manufacture: New Height: 400mm Width: 2,550mm Color: yellow Price: incl. VAT Please request shipping with your postal code. Our guardrails can also be used in other applications, e.g., on a glass wall with several components, see images 4 and 5. If desired, please send us an inquiry. Other items such as: Floor fixings Connectors Load warning signs Impact guards Guardrails Grating Back wall grating Deep shelves Barrier railings and much more… Just ask us! “Benefit from over 20 years of industry experience – we will provide you with competent and personalized advice as your experienced specialist retailer for new and used shelving systems” Sales and delivery conditions (B2B) - Prices & Logistics: All prices are net, ex works. Express delivery via our own fleet is possible after individual agreement. - Offer status: All offers are subject to change. Subject to prior sale. - Reservation of title: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's guarantees apply.

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG056013, overall weight: 120 kg, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb reject system Manufacturer: HEUFT Systemtechnik GmbH Offered are components of an industrial HEUFT system for automatic full-product inspection and defect rejection in filling and/or packaging lines. Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closures, labels, and other quality characteristics Automatic product tracking Connection of reject systems for removing defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Manufacturer's stated series performance: up to 72,000 containers/h* Reject system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Bdodpfx Aaozwmkzs Ioh Multi-segment reject system 16 segments Design: left / Left For the automatic removal of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The unit is new and unused, and has only been unpacked for a completeness check.

Year of construction: 2008, condition: good (used), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Bodozww Ikepfx Aa Iedh Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line BRAND-NEW INSPECTION TECHNOLOGY BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced in 2025 and is therefore almost new. This represents a considerable added value compared to many older Rotoflex machines currently available on the used machinery market. The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Typical applications include: · Inspection of printed labels · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Condition: good (used), Year of construction: 1972, functionality: fully functional, turning height: 1,000 mm, turning diameter: 1,600 mm, faceplate diameter: 1,400 mm, Retrofit: 2001 Siemens control system SINUMERIK 840D Faceplate diameter 1,400 mm Turning diameter 1,600 mm Turning height 1,000 mm Fully functional. Please refer to the photos for further information. A video of the machine in operation can be provided upon request. Inspection appointments are possible by arrangement. The buyer must arrange the collection. Loading onto a truck/container provided by the buyer is included. Invoice with VAT shown. Since these are used machines/used accessories, we exclude any warranty or guarantee. The information is provided to the best of our knowledge, and we assume no liability. We reserve the right to make changes to technical data and to correct any errors in the description. The buyer has the right to inspect the goods for condition and functionality before concluding the contract. We exclude any warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that did not occur to the delivered item itself. Bjdpfx Aaszvl R Rj Iodh

Condition: used, mileage: 350,000 km, power: 132 kW (179.47 HP), first registration: 04/2001, fuel type: diesel, empty load weight: 5,320 kg, maximum load weight: 2,170 kg, overall weight: 7,490 kg, tire size: 215 / 75 R 17,5, axle configuration: 4x2, wheelbase: 4,250 mm, brakes: constant throttle, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 8,100 mm, total width: 2,400 mm, total height: 3,200 mm, loading space length: 6,000 mm, loading space width: 2,330 mm, loading space height: 2,050 mm, Equipment: ABS, air conditioning, cabin, low noise, parking heater, spoiler, tail-lift, Vehicle location: in transit, license plate house, 1x air seat, electric mirror, heated mirror, electric window right, air conditioning, sun visor, auxiliary heating, switch 6, ABS (anti-lock braking system), constant throttle, roof spoiler, lifting + lowering, leaf-air suspension, low-noise G1, tail lift aluminum, upright, environmental badge yellow Wheelbase: 4250 mm Body: box with split walls and LBW MBB 1000kg lifting load Body: box with side door on the right, partition wall in longitudinal direction, vehicle is in need of repair and is only sold for recycling! Brakes defective! Location: Company Alga GmbH, Molkereistraße 2 in 27419 Sittensen! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Bedpevhgybefx Aa Isdh - .

Condition: used, mileage: 299,900 km, power: 175 kW (237.93 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 8,650 kg, maximum load weight: 3,340 kg, overall weight: 11,990 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,040 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 6,200 mm, loading space width: 2,540 mm, loading space height: 1 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, registration house, 1x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, Telligent automatic gearshift, ABS (anti-lock braking system), traction control system (ASR), power take-off, front exhaust, differential lock, fog lights, leaf-air suspension, air+light trailer hitch, G1 noise reduction system, side aluminum bumpers, roof hatch, crane at rear, emergency stop, folding, 2-point support hyd. Aluminum side guards, pendulum flaps, roof hatch, crane at rear, emergency stop, foldable, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 4760 mm Body: Hegla glass transport body with side racking, rear crane for an extra charge of EUR 10,000-17,000, e.g. Fassi F95A21 EEV engine, 5.3t front axle, rear axle H4 11t crown wheel 390mm, ABS, disc brakes on front and rear axle, rear axle stabilizer, front underride guard, configurable special module (PSM), pre-installation for toll collection, distributor cockpit, Telligent automatic gearshift, pollen filter, automatic daytime running lights, reversing alarm, on-board diagnostics 2, engine brake with constant throttle, transmission lock for auxiliary drive, tank capacity: 180l + 100l, power take-off MB 60-2c MPA low position with N speed. Load diagram: 2.0m=4420kg, 4.1m=2210kg, 5.9m=1545kg, (3 x mechanical extensions can be retrofitted for an extra charge, then up to 12.0m=570kg)! The existing defective crane will be replaced by a Fassi F95A21. The crane can be exchanged for another crane on request! Radio control can be retrofitted for an extra charge! KM status: 305,465! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bdjdpfsvhhv Dox Aa Ieh - .

Condition: good (used), Year of construction: 2019, operating hours: 5,350 h, Technical Data – Kamag Wiesel WBH Euro 4 Vehicle • Manufacturer: Kamag • Model: Wiesel WBH 25E40 • Type: Hooklift truck • Emission standard: Euro 4 Weights • Permissible total weight: 36,000 kg • Max. payload: 17,000 kg • Unladen weight (standard): 19,000 kg Engine • Manufacturer: Mercedes-Benz • Type: OM 934 • Power: 170 kW (231 hp) • Displacement: 5.1 l • Max. torque: 900 Nm Transmission • Allison automatic transmission Bdedpfx Aoztq Atea Ijh Axles / Tires • 4x2 • Front axle: Single tires • Rear axle: Dual tires • Tires: 295/60 R22.5 Braking System • Disc brakes, front • Drum brakes, rear • Two-circuit compressed air brake system • ABS Performance • Maximum speed: 40 km/h • Climbing ability (laden): 13 % Dimensions • Overall length: 8,960 mm • Overall width: 2,315 mm • Overall height: 2,480 mm • Wheelbase: 4,800 mm • Ground clearance, front: 180 mm • Ground clearance, rear: 2,000 mm Lifting System • Lifting height, unladen: 950–1,600 mm • Lifting height, laden: 180–480 mm • Lifting capacity: 17,000 kg Steering • Hydraulic front axle steering • Turning circle (inside): 4,600 mm • Turning circle (outside): 10,500 mm Hydraulics / Electrics • Hydraulic oil tank: 530 l • On-board voltage: 24 V • Starter batteries: 2 × 12 V / 180 Ah Equipment (extract) • Cab with heating and air conditioning • Air-suspended driver's seat • LED work lights • Rotating beacon • Radio with CD and Bluetooth • Electric mirrors • Rear view camera • ABS • Hydraulic container mount • Telescopic LED marker lights • Rear trailer coupling Optical condition is age-related 4 tires at the wear limit, rear view camera defective Approximate Current operating hour counter: 5350h Current mileage: 23955km No guarantee that this corresponds to the current condition

Condition: used, functionality: limited functionality, There are 6 hand clippers, of which 2 are functional. The others are defective. Bjdpeztxa Hjfx Aa Ijdh

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective Bdjdpfx Aszub Nmsa Ish If you have any questions or require further information, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic side sealing machine for packaging products – regardless of their length – with full wrapping and without film overlap. The maximum output is 120 cycles/minute. Product feeding is performed via a conveyor belt while simultaneously inserting the product into a center-folded film through a forming shoulder. Bodsw E Igvspfx Aa Iedh The infeed conveyor can be easily adjusted for different product widths. The film tube containing the wrapped, aligned products is completely sealed on the side via a side sealing unit. After the product is wrapped with film, transverse sealing is carried out by a continuously heated, follow-along sealing system. The height of the forming shoulder and sealing units is manually adjustable. The remaining film scrap is taken up by a film winder. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Transverse sealing bar: 550 mm Film: center-folded film, approx. 12–80 µm Maximum film roll outer diameter: 400 mm Maximum film roll width: 600 mm Minimum product length: 120 mm Minimum product width: 80 mm Working height: 780–930 mm Tunnel passage width: 450 mm Tunnel passage height: 200 mm Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 1,473 mm, table load: 1,350 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Bodpfx Ajx D Eg Uea Iodh Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Condition: used, overall weight: 16,000 kg, first registration: 01/1999, loading space length: 5,394 mm, loading space width: 2,489 mm, loading space height: 2,576 mm, Year of construction: 1999, GLEICH VEHICLE CONSTRUCTION PR.+PL. ? ATLAS AK 190.1 ? 16.3M CRANE? ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST 2 UNITS AVAILABLE / 1 WITH FASSI CRANE / 1 WITH ATLAS CRANE ----VEHICLE EQUIPMENT ----VEHICLE DATA GROSS VEHICLE WEIGHT: 16,000 KG OVERALL LENGTH: 7,450 MM ----CRANE PLATFORM MOUNTING POINTS: APPROX. 5.86 M ----CRANE SUPERSTRUCTURE ATLAS CRANE MODEL: AK 190.1 A4 YEAR OF MANUFACTURE: 1999 MAXIMUM WORKING PRESSURE: 300 BAR MAXIMUM LIFTING CAPACITY AT 2.2 M OUTREACH: APPROX. 6,550 TO 7,400 KG MAXIMUM OUTREACH: 16.3 M WITH APPROX. 710 TO 770 KG LIFTING CAPACITY CRANE OPERATED VIA SEPARATE DIESEL ENGINE ----BODY FLATBED WITH CURTAIN SIDE MANUFACTURER: Gleich Fahrzeugbau GmbH FLOOR MADE OF APPROX. 30 MM WATERPROOF BONDED FILM FACED PLYWOOD SIDE PANEL HEIGHT: 800 MM SIDE WALLS FOLDABLE AND REMOVABLE FIXED FRONT WALL REAR WITH DOUBLE DOORS AND BAR LOCKING MECHANISM LASHING POINTS INTEGRATED INTO EDGE PROFILE SUBFRAME MADE OF STEEL, AUXILIARY FRAME ACCORDING TO DIN EN 283 284 ----TARP/CURTAIN ROOF COLOUR APPROX. RAL 9010 SLIDING CURTAIN LIGHT GREY SLIDING ROOF, SIDEWAYS OPENING FRONT AND REAR ----INTERNAL DIMENSIONS LENGTH: 5.4 M HEIGHT: 2.57 M WIDTH: 2.49 M ----CONDITION UVV INSPECTION OF LOADING CRANE PERFORMED NO SAFETY-RELATED DEFECTS FOUND CRANE FULLY FUNCTIONAL CRANE REMOTE CONTROL AVAILABLE Bdsdpfex Sbckjx Aa Ish ----EXPORT SALES ONLY WITH DEPOSIT (MINIMUM 500 – 2000 €) EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 € CUSTOMS EXPORT CLEARANCE (EXW) WITHIN 10 MIN. (APPROVED EXPORTER) 5-DAY, 30-DAY PLATES, AND 17–21 DAYS AUSTRIAN PLATES, EURO 1 VEHICLE RESERVATIONS ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least 500.00 € / 1,000.00 € is required for sales to EU or third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Subject to changes, errors, and prior sale! See more vehicles on our homepage: Sale is exclusively subject to our terms and conditions – see homepage. Important note – Important information: Despite careful verification of all details in our listing, errors may occur. Some of these may be due to transmission errors in the systems of the various platform providers. Therefore, all specifications are made without guarantee and do not represent legally binding characteristics. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information provided for the initiation of a contract. All details are given without guarantee and do not constitute warranted characteristics.

Condition: good (used), Used, insulated stainless steel tank with agitator Last application: Foodstuffs Article number: 10354 Volume: 200L Type: Standing on a stainless steel rolling frame Material (in contact with media): 1.4301 stainless steel Bjdpfxsd N Nk Uo Aa Iedh Design: Single-walled / Insulated / Coolable Bottom: Sloping flat bottom Top: Hinged lid Operating pressure according to nameplate: ATM Tank dimensions: Outer diameter: 740mm Inner diameter: 695mm Cylindrical height: 550mm Overall height: 1850mm Height of legs: 230mm Distance from outlet to bottom: 670mm Overall width: 900mm Overall length: 1420mm Materials: Inside: 1.4301 stainless steel Equipment: Hand hole on the top: 180mm Various connections Agitator with propeller, speed adjustable Control cabinet Insulated Cooling unit (defective)

Condition: used, mileage: 354,360 km, power: 116 kW (157.72 HP), first registration: 12/2003, fuel type: diesel, overall weight: 3,295 kg, next inspection (TÜV): 06/2027, color: grey, gearing type: mechanical, number of seats: 3, total length: 6,500 mm, total width: 2,100 mm, total height: 2,700 mm, Year of construction: 2003, Equipment: ABS, tail-lift, Valid TÜV inspection until 06/2027. – The following defects are known; further defects are possible: – Rust all around – Tailgate lift not functioning: contact switch in the cab defective, tailgate lift at the rear is oily – 3rd gear jumps out – Parking brake not functioning – Interior door handle on the driver’s side defective. – Errors, changes, and prior sale are subject to change. – Special equipment: Electrically adjustable and heated exterior mirrors, exterior temperature display, multi-function display / on-board computer, chassis: reinforced rear shock absorbers, fuel tank: 100 liters, seats in the cab: driver’s seat with suspension. Additional equipment: Driver-side airbag, 80 Ah battery, floor covering in the cab: rubber, lockable glove compartment, body/superstructure: standard platform body, engine 2.8 liters – 116 kW TDI, wheelbase 4025 mm, seats in the cab: double bench seat, front stabilizer, heat-insulating glazing, permissible total weight 3.50 t. Bdjdpfx Aaozxkz Tj Ish

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, warranty duration: 12 months, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Complete powder coating system (curing oven 3.2m + spray booth + Wagner/Gema application + conveying system) Like-new, complete powder coating system including a 3.2m electric/gas curing oven, mobile spray booth, Wagner or Gema application + hanging conveying system (200 kg). Ready for immediate use and flexibly expandable! Customer-specific adjustments possible upon request. Maximum flexibility and efficiency for your surface coating Are you looking for a reliable, high-performance, and immediately usable complete solution for powder coating? This complete powder coating system combines top-class industrial components into a perfectly coordinated overall system. Whether for single-part production, small series, or contract coating – the system offers you the ideal combination of high coating quality, low energy consumption, and well-thought-out material flow. The heart of the system is the generously sized electric or gas curing oven with a usable space of 3.20 x 1.40 x 2.00 [m]. The indirect heating via the integrated stainless steel thermal block and the powerful air circulation ensures excellent, homogeneous temperature distribution, which reliably prevents coating defects. The system is complemented by a mobile spray booth, which guarantees maximum flexibility in the hall area due to its design. Together with the proven Wagner/Gema handheld unit, you can apply a wide variety of powder coatings (from standard organic to metallic) precisely and economically. The included C-rail system, with its approximately 27 meters in length and a load capacity of 200 kg per carrier, ensures smooth, ergonomic transport of your workpieces between coating and curing. Important: Does the system not fit 1:1 into your hall? Individual adjustments are possible! Each production facility has its own requirements regarding space, component sizes, and processes. This system can be flexibly adapted to your specific conditions on site. - Tailored dimensions: Oven dimensions or booth sizes can be modified on request. - Expansion of the conveying system: Adjustment of the rail system (layout, switches, usable lengths) to your hall geometry. - Special equipment: Integration of additional components such as pre-treatment, extended control technology, alternative heating methods, or a higher degree of automation. Just contact us! We will examine your layouts and put together a customized configuration for you. Technical data (quick overview) - Condition: New / Unused - Oven interior dimensions (L x W x H): 3,225 x 1,400 x 2,000 [mm] - Max. oven temperature: 220°C - Oven heating capacity: 39 kW (electric or gas, indirect via stainless steel thermal block) - Oven air circulation capacity: 4,500 m³/h - Spray booth dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] Bedpfx Aob Dxnwja Iodh - Booth extraction capacity: 6,000 m³/h; 3 kW - Conveying system: Manual rail system (C-rail, max. 200 kg / carrier) - Powder gun: WAGNER or GEMA Your contact person & contact Do you have questions about the system, would you like a technical data sheet/offer, or would you like to check how the system can be optimally integrated into your production chain? Contact us now without obligation! We will be happy to advise you on technical details, customization options, and delivery conditions.

Condition: excellent (used), Welding positioner, 10-ton load capacity Condition: flawless, no defects, extremely robust, virtually indestructible, simple technology allows for easy maintenance. Speed continuously adjustable from 0.01 to 1.0 rpm and speed display with dual-pedal remote control and additional hand-held remote control Bodpfx Ash Dm Stea Isdh Diameter of the clamping plate: 1800 mm Height when tilted to the center of the plate: 1650 mm Height in horizontal position: 1850 mm Length: 3300 mm Width: 1700 mm The feet can be shortened upon request.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: TAM-164, compressed air connection: 6 bar, input voltage: 400 V, total width: 1,880 mm, total length: 8,200 mm, total height: 1,950 mm, type of input current: three-phase, input current: 32 A, warranty duration: 3 months, pneumatic connection: 12 bar, power of the servo motor: 14,000 W, Equipment: CE marking, documentation/manual, type plate available, Used automatic KELLER Tampo master pad printing machine, designed for decorating pens and cylindrical parts. The machine enables 3-colour printing. The machine operates in fully automatic mode: the operator loads the parts into the feeder, and after completion of the process, the finished parts are automatically unloaded into a carton. Bdedpfx Aaez D Ht Tj Ish The equipment includes a servo-driven chain conveyor, automatic part loading and unloading modules, a positioning station, an ionizer, three independent pad printing modules with an automatic pad cleaning system, hot-air drying between the individual printing stations, an IR drying tunnel after completion of the printing process, and a vision inspection system for print quality with automatic rejection of defective parts. Adjustable conveyor prisms and pneumatic rotary modules allow the machine settings to be adapted to different part dimensions. The machine is controlled by a Mitsubishi PLC and a 10″ HMI touchscreen, allowing recipes and process parameters to be managed. The machine is also equipped with a remote communication module. The production process starts with the automatic transfer of the part from the feeder onto the conveyor. The ionizer neutralizes electrostatic charges on the surface of the part before printing. The part is then positioned and transferred successively to three pad printing stations. Each station applies one colour, with hot-air drying between the individual printing stages. After completion of the three-colour printing process, the part passes through the IR drying tunnel and is then subjected to automatic vision inspection. Finished parts are automatically unloaded into a carton, while parts with detected defects are diverted to a separate container. Maximum graphic size: 60 × 60 mm Part dimensions: length 60–150 mm, diameter 8–14 mm. Machine output: up to 2400 pcs/h. Electrical power supply: 3 × 400 V, 32 A. Required compressed air pressure: 6–8 bar. The machine is operational and in working condition. A link to a video showing the machine in operation is provided below. Before sale, the machine will undergo servicing, and we provide a 3-month warranty. The machine can be inspected and demonstrated in operation at our premises in Poland (European Union). The standard demonstration includes a presentation of the machine's operation. Upon request, we can perform paid technological tests using the customer's parts. The machine is sold in the condition and configuration shown in the photographs. Upon request, modifications or additional equipment can be provided according to the customer's individual requirements. Standard delivery terms: EXW. We can additionally arrange transport to a location anywhere in the world. Additional equipment: possibility of manufacturing dedicated tooling for a specific part and carrying out technological tests, including selection of printing parameters and consumables. The price is quoted in EUR.

Condition: excellent (used), The item for sale is a three-phase electric motor with an electromagnetic brake, manufactured by ABM Greiffenberger Antriebstechnik. Technical data: Manufacturer: ABM Greiffenberger Antriebstechnik GmbH Type: EFB3/4D90LB-4 Bdsdpfxszw E Nie Aa Ieh Motor number: F558779 0017 TNR: 020017992 Power: 2.2 kW Voltage: 200–254 / 346–440 V Connection: Δ/Y Current: 9.2/5.3 A Rotational speed: 1350 rpm Frequency: 50 Hz Power factor: cos φ 0.84 Operating mode: S1 Protection class: IP54 Insulation class: F Electromagnetic brake Braking torque: 22.6 Nm Brake voltage: 220 V Brake current: 0.42 A Made in Germany The motor is used and comes from the dismantling of an industrial installation. It shows signs of use and storage, including scratches, paint defects, and localized corrosion. Note: The terminal box cover is missing – the terminals and electrical installation are exposed. The condition and scope of the sale are accurately shown in the photos.

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, model year 2021, from the premium manufacturer Rational (successor to the VCC 211). !!! Price upon request !!! Bdodpfx Aozrfbhja Ish Our in-house workshop has performed a fresh inspection, and the iVario L is in top condition. The offer does not include any accessories, but these can be purchased for an additional charge. The list price for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21108058335 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional. Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and sweet dishes, soups and sauces, or the 5 cooking methods: boiling, frying, deep-frying, braising, and finishing. iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated Wi-Fi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made in accordance with our general terms and conditions (GTC).

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Bdsdpfjzyk D Dsx Aa Ish Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Year of construction: 2020, condition: used, functionality: fully functional, This is a combination steam oven, model CMP 201, in an electric version, manufactured by the premium brand Rational in 2020, with only 1361 operating hours. The unit features a fully automatic self-cleaning program!! The combination steam oven is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, wiring diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Bjdjzqthmspfx Aa Isdh Serial number: E21MI20022814159 Year of manufacture: 2020 Condition: Used, inspected and fully functional. Further information: Possible applications: Steam mode: from 30° C to 130° C Convection mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: bringing prepared and chilled dishes to the ideal serving temperature in the optimal climate Automatic separation of fat for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swiveling for easier cleaning) Cooking chamber lighting Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic flushing and emptying) Handheld spray nozzle with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Bdodpfx Ajyxq Ucsa Ioh