Used Defective for sale (916)

Condition: used, Year of construction: 2021, Model No.: 69UG15-050S-55, Serial No.: UES70101264/UEL70100594/UEL70100587; 2 units are defective; no documentation available. Lrodpoy T Nzksfx Amnol

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and Ljdpfx Amoy S Duvjnorl reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Lrjdpfx Aey T Iyfjmnsl

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2015, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 8,860 mm, color: orange, Year of construction: 2015, Equipment: tail-lift, General information Model year: 2026 Axle configuration Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Tyre size: 385 / 55 / R22.5; Lift axle; Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Lodpfx Amoy Tyb Ijnsrl Rear axle 3: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 8.940 kg Carrying capacity: 33.060 kg GVW: 42.000 kg Functional Tail lift: Dhollandia DHSM.30 -> Defect, slider lift, 2500 kg Make of bodywork: SOR Iberica-S3E Carrier Vector 1550 Cooling engine: diesel and electric (7510 operating hours diesel; 9632 electric) Wall thickness: 50 mm Maintenance APK (MOT): tested until 07/2026 History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Ledpfxjy Sux Ss Amnorl Errors in technical data and description reserved

Condition: used, 1 unit of LINDE L16 electric high-lift pallet truck Ljdpey Thddefx Amnsrl defective, to be used as a source of spare parts Color: as shown in the pictures, according to the images and upon inspection Condition: Used, functional

Condition: used, mileage: 510,000 km, first registration: 01/2019, overall weight: 16,000 kg, axle configuration: 2 axles, emission class: euro6, Colour: light blue, Euro 6 engine, defective DPF!! SOLD AS IS!! Lredpfx Amoxagf Renel

Condition: repair required (used), functionality: limited functionality, mileage: 487,000 km, Year of construction: 2007, Mercedes Benz Atego 1224 L available for immediate purchase Mileage: 487,000 km Lredjy N R E Njpfx Amnsl Important: BATTERY DEFECTIVE! The vehicle must be jump-started. Please bring a starter pack when collecting.

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, professionally fully overhauled and tested with 3-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange procedure, your defective exchange part must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 114 ID 325 005-12 SN15160246 under the exchange service. The unit is professionally fully overhauled and tested, with a 3-month warranty and guaranteed full functionality. Scope of delivery according to photos. For both repair and exchange services, your returned part must be free from mechanical damage such as breakages, as these are irreparable. If such damage is found, a surcharge of €1,000 incl. VAT will be invoiced. Lrsdpfx Amox Etdmsnel

Condition: defective spare-parts repository (used), Electric pallet truck with tiller, Jungheinrich, Ameise EJE 222 – used, defective battery - : Price on request! Manufacturer: JUNGHEINRICH Model: Ameise EJE 222 (defective battery) Serial number: 90106944 Year of manufacture: 2004 Rated capacity: 2,200 kg Unladen weight without battery: 380 kg 24V, 1.5kW Battery weight: 171 / 263 kg Operating hours: 7,255 h Lift height: 130 mm Fork length: 1,150 mm Lrjdpeyzfncjfx Amnsl Vehicle weight: 643 kg Condition: good Available: immediately Location: 97828 Marktheidenfeld

Condition: good (used), Year of construction: 2009, Reach Truck, Toyota, BT Reflex ACi- RRB7 – used - : Price ex location: €9,500 (net)! Manufacturer: Toyota Stapler Model: BT Reflex ACi- RRB7 (No. 69) Lredpoyrq Twsfx Amnol Year of manufacture: 2009 Battery from 2016 Manual telescopic fork tines Lifting height: 8,000 mm Mast height: 3,398 mm Operating hours: approx. 5,440 h Condition: Overall condition is good, with regular inspections always carried out and any detected defects immediately rectified. Available: immediately Location: D-79576 Weil am Rhein

Condition: used, Electric Tow Tractor, Tugger Train Tractor STILL E-Tugger STILL Type R06 3-wheel tow tractor, electric tow machine Serial no. W4X126A00120 Year of manufacture: 2010 Towing capacity: max. 6000 kg Payload: 150 kg Front axle load: 420 kg Rear axle load: 600 kg Drive power: 3.2 kW / 60 min Battery voltage: 24 volts - 3-wheel tow tractor - Without towing coupling, mounting plate with Ø 14 mm holes, hole spacing 65 / 75 x 120 mm - Lighting system - 24-volt socket at rear - Equipped with 4 used traction batteries – functional – batteries, however, in poor condition - 3-wheel solid rubber tyres 4.00-8 / (3.00) Transport dimensions L x W x H: 1700 x 1000 x 1350 mm Unladen weight: 584 kg Battery weight: 467 kg (original battery defective) Four traction batteries provisionally installed – weight approx. 180 kg Total weight: approx. 770 kg Lrodpev Uramjfx Amnel In good condition

Condition: used, functionality: fully functional, machine/vehicle number: A5BAxxxx, Year of construction: 2021, operating hours: 331 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,485 mm, fuel type: diesel, mast type: triplex, construction height: 2,315 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 5,015 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,225 mm, Diesel forklift Chassis number: A5BAxxxx Load center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter automatic Condition: Refurbished without warranty Technical condition: Very good Ledpfoxfw U Hsx Amnsrl Front tyres type: Super elastic Front tyres size: SE 28x9-15 Rear tyres type: Super elastic Rear tyres size: SE 6.50-10 Description: UVV-inspected, top machine with low hours (genuine hours - documentation available), sold without warranty/liability for material defects Sideshift, Mounted (Cascade) 3rd valve, 4th valve, front working lights, roof cover, windscreen, half-cabin, full free lift, CE certificate, safety light, windshield wiper, Makrolon rear window, tail lights, warning beacon, panoramic mirror, model CPCD 35 - XW97F with Kubota diesel engine, reverse alarm

Condition: used, functionality: fully functional, machine/vehicle number: FN 48xxxx, Year of construction: 2015, operating hours: 1,985 h, load capacity: 1,800 kg, lifting height: 4,250 mm, free lift: 1,250 mm, fuel type: electric, mast type: triplex, construction height: 1,982 mm, fork length: 1,200 mm, empty load weight: 3,542 kg, total length: 1,995 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-Wheel Forklift VIN: FN 48xxxx Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: AC Impulse Condition: Reconditioned without warranty Technical Condition: Very good Front Tire Type: Super Elastic Front Tire Size: SE 200/50-10 Rear Tire Type: Super Elastic Rear Tire Size: SE 140/55-9 Battery Voltage: 48V Battery Ah: 750Ah Battery Manufacturer: Jungheinrich Lredpfowl R Suox Amnel Battery Type: PzS Battery Year of Manufacture: 2015 Description: Serviced, technically and visually refurbished, UVV approved, without warranty/liability for material defects Sideshift, integrated 3rd valve, rear work light, work light Front, roof cover, windshield, impulse control, full free lift, rear window, PVC side panel on the right, complete lighting (not road legal), interior mirror, Solo Pilot, battery (03/2015) with Aquamatik, external charger, overall height under 2 meters!

Condition: used, Year of construction: 2005, saw-blade dia. 500 mm Cutting height 90 mm Lrodpfx Amsy S Di Tonsl Motor output 7,5 kW Input length 4.500 mm cutting width 300 mm Optimization cross-cut saw Weinig /Dimter type Opticut S90 for automatic length optimization and precise cross-cutting of solid wood. The machine detects defects in the wood and ensures maximum material yield through intelligent cutting optimization. Ideal for industrial production lines and performance-oriented wood processing.

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 80622109, Year of construction: 1997, operating hours: 4,200 h, load capacity: 1,600 kg, lifting height: 4,250 mm, fuel type: electric, mast type: triplex, fork width: 185 mm, fork thickness: 61 mm, color: yellow, Equipment: UVV, High-lift pallet truck with a triplex mast, free lift, battery with charger, wheels and rollers in good condition, and UVV certification. Lrodpey Txlfofx Amnol The vehicle is only used very occasionally, if at all, for distances of 1-2 meters. The drive control system and reversing group are likely defective. All documents from recent years are included. Collection by the buyer.

Condition: used, functionality: fully functional, machine/vehicle number: 903xxxxx, Year of construction: 2011, operating hours: 3,578 h, load capacity: 1,200 kg, lifting height: 2,900 mm, free lift: 100 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, fork length: 1,150 mm, empty load weight: 1,131 kg, total length: 1,981 mm, drive type: Elektro, construction width: 800 mm, High-lift stacker Chassis number: 903xxxxx Load centre: 600 mm Mast type: Standard Transmission: AC impulse control Condition: Refurbished, without warranty Technical condition: Very good Front tyre type: Polyurethane Front tyre size: Tandem load rollers, polyurethane Rear tyre type: Polyurethane Rear tyre size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2026 Description: Serviced, both technically and visually refurbished, UVV inspection passed, a new battery will be ordered and installed before delivery, sold without warranty/liability for material defects. Ljdpfx Ajy S Hbfomnjrl Features: Pulse control, initial lift, discharge monitor, hour meter, crawl speed button, side battery removal, NEW battery will be ordered and installed before delivery, built-in charger, dent on the apron (cosmetic only).

Condition: new, Fanuc A06B-0142-B189 AC servo motor, serial no. according to photo, connection socket defective see photo,,unused, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lrsdpfx Aoi D Hxaomnjl

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Ledoy D E Tdepfx Amnorl

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system Lodpfxefngw Te Amnsrl -Transfer: in the current condition as seen -Error: L3 power level defective -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm -Weight: 154 kg

Condition: used, mileage: 621,495 km, first registration: 04/2018, fuel type: diesel, axle configuration: 6x4, wheelbase: 46,000 mm, fuel: diesel, fuel tank capacity: 550 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro1, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, crane, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Air suspension - Air-suspended seats - Radio/multimedia system - Rotating beacon - Seat heating - Auxiliary heater - Toolbox - Windshield - Xenon lighting = Notes = Internal inquiry number: 6-110 Volvo FH540 6x4 Epsilon Q150Z Short Timber Body Vehicle is available immediately! Vehicle: Volvo FH540 6x4 Chassis height: HIGH (formerly STD); for exact height measurements, please refer to VBI/WIS (dependent on tire size). Globetrotter safety cab, FH Wheelbase: 4600 mm Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation Euro 6 compliant emissions Diesel engine 131, 551 HP/405 kW, 2652 Nm with exhaust brake pressure regulator (including engine control for I-Shift) I-Shift AT2612F, automated 12-speed transmission, max input torque: 2,600 Nm Body: Pavic short timber stanchion body with steel front wall 8x EXTE aluminum stakes Note regarding the loading crane: The crane's rack is defective and needs repair (slewing not possible!) Crane: Epsilon Q150Z 9.6 loading crane (Double extension), lifting moment 140 kNm 4 linear levers, 2 pedals Comfort package - Headlights ON/OFF - Engine START/STOP - Engine speed adjustment + - Horn - 1 additional free switch - Seat heating via weatherproof and removable cover - Electrical box with terminal strip mounted on the base frame - Special base frame with 4-point mounting incl. 2 additional brackets - Outrigger plates extended by 170 mm - Grapple saw controls via foot pedal Lrodpfx Amoy T Nb Densl Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = General information Application: Forestry Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Front axle: Steered; suspension: leaf spring Rear axle 1: Differential lock; suspension: air suspension Rear axle 2: Differential lock; suspension: air suspension Weights Kerb weight: 15,600 kg Payload: 10,400 kg Gross vehicle weight: 26,000 kg Functional Crane: Palfinger Epsilon Q150Z 9.6, mounted at the rear of the chassis

Condition: good (used), Year of construction: 2008, functionality: fully functional, Hurco VMX 50 T, Year of manufacture 2008, Winmax control system, 40-position tool changer, High-pressure coolant system, Spindle speed up to 12,000 rpm, Chip conveyor, 3D measuring probe, X-axis bearing likely defective. Ljdpfx Amey T Iwqenerl

Condition: used, Offered are used 20DV office containers. CONTAINER TYPE: Office container 20DV CONDITION ON DELIVERY: Used, wind- and waterproof, without equipment, original pictures. All containers are equipped with electrical installation and heating, the entrance door is located on the short side. Containers are sold in used condition and may show defects, contaminations, color differences, rust, etc. DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal clear height 2500 mm. AVAILABILITY: Immediately TRANSPORT: Please provide your postal code so we can send you a free and non-binding offer for the containers including delivery and, if necessary, unloading from the truck. VARIETY: We also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, …) to suit any requirement. Whether for storage, construction projects, logistics solutions, or sea transport. Lrodpfx Amoy T Ntyonel We look forward to hearing from you! NAUTEXA GmbH

Condition: defective spare-parts repository (used), Year of construction: 2006, operating hours: 4,272 h, functionality: limited functionality, Böcker trailer crane 27/1200, defective, for use as a parts donor Trailer crane Manufacturer: Böcker Type: AHK 27/1200 First registration: 09/2006 Year of manufacture according to the nameplate: 2006 Operating hours recorded: 4,272 h The unit is defective, incomplete, and not operational. It is explicitly sold as a parts donor / for spare parts recovery only. Purchase price (net): €16,900 plus applicable VAT. Value-added tax will be shown separately on our invoice. Lrodpfey T Iwkjx Amnol Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without warranty or guarantee and only to business customers. Inquiries will be processed from Monday to Friday between 8:00 a.m. and 4:00 p.m.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,586 h, load capacity: 2,000 kg, lifting height: 6,000 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Transmission: Automatic Condition: Ready for use and fully functional Technical condition: Very good Front tyres type: Superelastic Lodjxulqujpfx Amnsrl Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Battery voltage: 48V Description: Price includes new safety inspection (UVV), only minor paint defects on the counterweight, battery inspection date 2020 – will be reconditioned with a power cycler including Kappa test, charger included with matching plug, we are happy to organise cost-effective transport for you. Lease-purchase available! Side shifter, 3rd valve, rear work light, front work light, half cab, full free lift, CE certificate, safety light,