Used Defect for sale (1,094)

Condition: ready for operation (used), Heidenhain UV 140 Power Supply, ID: 335 009-04, SN: 12182383 – supplied with test report, professionally fully overhauled and tested, comes with a 3-month warranty, guaranteed 100% operational. Delivery includes all items shown in the photos. Please note: In the exchange process, your defective return part must not have any mechanical damage such as fractures, as these are no longer repairable. In such cases, an additional charge of €1,000 incl. VAT will apply. Attention: You are bidding on a Heidenhain UV 140 inverter, ID 335 009-04, SN 12182383, as part of an exchange service. The unit is professionally overhauled, tested, and offered with a 3-month warranty. Delivery scope according to photos. In both repair and exchange, your returned defective part must be free of mechanical damage like breakages. If not, an additional invoice for €1,000 incl. VAT will be issued. Bodpfxox Dwz Rs Aa Isdh

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part number 344 980-13, serial number: 1334360, offered on an exchange basis (Exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. Scope of delivery as shown in the photos. Bjdpfx Aex Etkyea Isdh Please note: Under the exchange procedure, your defective return unit must not have any mechanical damage such as fractures or breaks, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: used, functionality: fully functional, machine/vehicle number: FN 57xxxx, Year of construction: 2018, operating hours: 6,333 h, load capacity: 2,500 kg, lifting height: 2,900 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,240 mm, fork length: 1,200 mm, empty load weight: 4,717 kg, total length: 2,441 mm, drive type: Elektro, construction width: 1,198 mm, Electric 4-wheel forklift Chassis number: FN 57xxxx Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: Very good Front tires type: Superelastic Bdjdpfx Aasyxtqao Ioh Front tires size: SE 225/75-10 Front tires condition: New Rear tires type: Superelastic Rear tires size: SE 18x7-8 Rear tires condition: New Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: serviced, refurbished both technically and visually, UVV safety inspection passed, sold without warranty/liability for material defects Sideshifter, integrated, couplings for 4th function on the fork carriage 3rd valve, 4th valve, rear working lights, front working lights, overhead guard, front windscreen, pulse control, CE certificate, safety light, rear PVC cover, single lever control (Solo-Pilot), panoramic mirror, new tires, battery (manufacturer-refurbished 09/2022) with Aquamatik, matching external charger

Condition: defective spare-parts repository (used), Electric pallet truck with tiller, Jungheinrich, Ameise EJE 222 – used, defective battery - : Price on request! Manufacturer: JUNGHEINRICH Model: Ameise EJE 222 (defective battery) Serial number: 90106944 Year of manufacture: 2004 Rated capacity: 2,200 kg Unladen weight without battery: 380 kg 24V, 1.5kW Battery weight: 171 / 263 kg Bdodpeyzfncjfx Aa Ieh Operating hours: 7,255 h Lift height: 130 mm Fork length: 1,150 mm Vehicle weight: 643 kg Condition: good Available: immediately Location: 97828 Marktheidenfeld

Condition: used, functionality: fully functional, machine/vehicle number: FN 52xxxx, Year of construction: 2016, operating hours: 3,175 h, load capacity: 5,000 kg, lifting height: 3,300 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,440 mm, fork length: 1,200 mm, empty load weight: 6,910 kg, total length: 3,160 mm, drive type: Treibgas, construction width: 1,450 mm, LPG Forklift Chassis number: FN 52xxxx Load center: 600 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Bedpfx Aex Imwxea Iedh Mast type: Standard Transmission: Hydrostatic, manual direction change Condition: Refurbished without warranty Technical condition: Very good Front tires type: Superelastic Front tires size: SE 300-15 Rear tires type: Superelastic Rear tires size: SE 28x9-15 Description: Serviced, technically and visually reconditioned, UVV-inspected, sold without warranty or liability for material defects Sideshift, integrated 3rd valve, 4th valve, rear working lights, front working lights, heating, full cabin, Couplings for 4th function at carriage, Solo-Pilot (single lever), panoramic mirror

Condition: used, Year of construction: 2023, operating hours: 600 h, functionality: fully functional, power: 55.16 kW (75.00 HP), overall weight: 3,500 kg, The BBT 400 Woodzilla is a compact, powerful, and mobile drum chipper with aggressive feed, mounted on a 3.5-ton tandem trailer chassis and capable of 360° rotation. Technical Data Year of manufacture: 2023 Operating hours: approx. 600 hours Power: Diesel, Deutz TCD 2.9, 55 kW (75 HP), Stage 5 Feed opening: 320 x 500 mm Drum size: 400 x 500 mm, 4 knives Maximum log diameter: 32 cm Stabilisation: 4-way hydraulic support Z-crane Ben-Tele 550 Crane outreach: 5,500 mm Telescopic stroke: 1,100 mm Radio remote control for chipper and crane Brake system: Overrun brake Weight: 3,500 kg The machine is in good visual and technical condition. Bodpfxsykzlze Aa Iodh Location: North Rhine-Westphalia Availability: by arrangement Warranty: The machine is sold as-is at the time of delivery. The seller assumes no liability for defects. We reserve the right to prior sale, modifications, and repairs. Didn't find the right machine? Please contact us!

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 1511151394, turning length: 1,500 mm, turning diameter: 650 mm, spindle bore: 82 mm, spindle speed (max.): 2,400 rpm, overall weight: 4,300 kg, The machine was used without any restrictions or known defects until it was decommissioned. The original purchase price of the machine was EUR 79,000! Bdsdpfx Ajymay Asa Ioh TECHNICAL DETAILS Turning length: 1,500 mm Turning diameter: 650 mm Spindle bore: 82 mm Spindle speed range: 80 - 2,400 rpm MACHINE DETAILS Weight: 4,300 kg Drive power: 35 kVA Frequency: 50 Hz Full load current: 52 A Number of phases: 3 + PE Short-circuit protection: 25 kA Nominal voltage: 400 V Max. load current: 520 A EQUIPMENT Documentation / Manual

Condition: defective spare-parts repository (used), For dismantling – spindle drive defective – without coolant system. Bdodpfx Aaozxmdwj Ish

Condition: used, Year of construction: 2002, CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Bodpfx Aezy Rrhea Isdh Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T

Condition: used, mileage: 14,800 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 09/2017, emission class: none, suspension: other, Year of construction: 2017, driver cabin: other, fuel: electricity, Control unit defective! The Linde P 60 Z tow tractor is a versatile and powerful assistant for internal transport. With only 14,800 km on the odometer and first registration in September 2017, it offers an attractive combination of a modern model year and manageable mileage. The three-wheel design ensures high maneuverability and precise handling, making it ideal for warehouses, logistics and production areas. A reliable and practical tow tractor for companies that value efficient transport processes, compact dimensions and proven Linde quality. Bdjdpfx Aaszdvwqo Ieh For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: ready for operation (used), functionality: fully functional, operating hours: 15,500 h, load capacity: 5,000 kg, lifting height: 5,100 mm, Equipment: adjustable boom, air conditioning, cabin, head guard, lighting, pallet forks, seat heater, sideshift, trailer coupling, The following is offered: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to operate RX 70-50 4-wheel diesel forklift Used Year of manufacture: 2021 This offer is intended for commercial customers, dealers, public and church institutions only! Unless explicitly stated otherwise, this is a used item. The machine is in working condition with signs of previous use. Existing defects can be discussed by telephone. FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT Manufacturer: STILL Model: RX 70-50 Mast: Triplex Load capacity: 5,000 kg Lifting height: 5,100 mm Fork positioner Bsdpfx Aasw U D I He Iodh 2 pairs of forks (4 forks) Fork length: 240 cm Hours: 15,500 Fork positioner Full cab Overall height: 2,460 mm Please refer to the photos for data. Further industrial trucks available from stock! Inspection is possible on Tuesdays and Thursdays between 9:00 am and 4:00 pm or by prior telephone arrangement. Subject to prior sale, the item can be taken immediately if required. All dimensions are approximate. General notes for all offers: All information is subject to change.

Condition: used, functionality: fully functional, machine/vehicle number: 905xxxxx, Year of construction: 2019, operating hours: 805 h, load capacity: 1,400 kg, lifting height: 2,900 mm, free lift: 100 mm, fuel type: electric, mast type: simplex, construction height: 1,950 mm, fork length: 1,150 mm, empty load weight: 1,126 kg, total length: 1,988 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Chassis number: 905xxxxx Load center: 600 mm Mast type: Standard Transmission: AC impulse Condition: Refurbished, without warranty Technical condition: Very good Front tire type: Polyurethane Front tire size: Load rollers, single polyurethane Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Bdodpfxjxfcw Tj Aa Ish Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2019 Description: Serviced, technically and visually refurbished, safety inspection (UVV) carried out, genuine operating hours, without warranty/liability for material defects Impulse control, CE certificate, lifting and lowering possible on both sides, discharge monitor, hour meter, creep speed button, battery (06/2019) with aquamatic, matching external charger included

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Bedpfxjvfdvbe Aa Iedh Also some tool pots are damaged. Can be repaired or used as spare parts *

Condition: used, Year of construction: 2002, Technical details: x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm tool change unit: 16 turning speeds: 8000 1/min control: SIEMENS 810 shopmill table surface area: 840 x 420 mm rapid traverse X- and Y-axis: 36 m/min rapid traverse Z-axis: 20 m/min taper ISO: SK 40 spindle drive: 15 kW weight of the machine ca.: 2,5 t space requirements approx. LxWxH: 2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, known defect: control starts not 100% special price Bedeviwg Uepfx Aa Iodh *

Condition: used, functionality: fully functional, machine/vehicle number: 910xxxxx, Year of construction: 2013, operating hours: 5,188 h, load capacity: 1,400 kg, lifting height: 7,100 mm, free lift: 2,256 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 1,150 mm, empty load weight: 3,279 kg, total length: 1,780 mm, drive type: Elektro, construction width: 1,270 mm, Reach truck Chassis number: 910xxxxx Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load wheels, polyurethane, single Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 48V Battery Ah: 620Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2025 Description: Completely refurbished by the manufacturer, UVV approved, without warranty/liability for defects Side shifter, integrated 3rd valve, impulse control, full free lift Multi-Pilot (joystick), 360-degree steering, load wheel cover, battery (08/2025) with Aquamatik, suitable charger, refurbished by the manufacturer. Bdedpezr Skijfx Aa Ish

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG050014, overall weight: 120 kg, height adjustment type: electric, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb rejection system Manufacturer: HEUFT Systemtechnik GmbH Components of an industrial HEUFT system for automatic full-product inspection and error rejection in filling or packaging lines are offered. Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX Bdsdpfxezwmg Ne Aa Ish In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closure, labels, and other quality characteristics Automatic product tracking Connection of rejection systems for sorting out defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Manufacturer's stated series performance: up to 72,000 containers/h* Rejection system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment rejection system 16 segments Design: left / Left For the automatic sorting out of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The device is new and unused; it was only unpacked for a completeness check. An inspection can be arranged at any time by prior agreement.

Condition: excellent (used), Year of construction: 1999, Used hydraulic rescue set including spreader, cutter, and two rescue cylinders in very good condition. All devices are in excellent optical and technical condition, have no damage whatsoever, and only show minor scratches or other normal signs of wear, which, however, do not in any way restrict the use of the devices – see pictures! The set consists of: - Power unit AMKUS EH 2A-HR, year of manufacture 1999 - Spreader AMKUS M28, year of manufacture 1999 - Cutter WEBER S 140-26, year of manufacture 2007 - Rescue cylinder WEBER RZ-2-1250 - Rescue cylinder WEBER RZ-1-850 All devices are equipped with single couplings. 1 transport case 110x60x90cm, approx. 100 kg Bedozn Nnkspfx Aa Isdh Collection is possible during our regular opening hours. Please arrange an appointment! Shipping via freight forwarder is possible for an additional charge. The sale is exclusively to commercial businesses. You will receive an invoice without VAT, as the seller is a public entity. Private buyers have the option to purchase the equipment "on behalf of a customer"; a direct commercial sale to private individuals will not take place! The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, or health. Please do not hesitate to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Bdedpfx Ajzdy Rzoa Ijh Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: like new (used), functionality: fully functional, Optical Sorter / Color Detector PROTEC BICS 2000 40C – Stainless Steel The PROTEC BICS 2000 40C optical color sorter is designed for the inspection, sorting, and automatic rejection of products based on color differences within food processing lines. The equipment allows for the analysis of the product as it passes through the inspection zone, detecting units, particles, or materials that do not meet the established color parameters. Non-conforming products can be automatically separated from the main flow, improving the uniformity and quality of the final product. Its configuration with a feeding system, optical inspection zone, and automatic rejection mechanism enables continuous operation on industrial sorting lines. MAIN FEATURES - Manufacturer: PROTEC - Model: BICS 2000 40C - Type: Optical sorter / color detector - Application: Automatic sorting and classification - Product inspection using optical technology - Detection of color differences - Automatic separation of non-conforming products - Continuous industrial processing - Product feeding and distribution system - Optical inspection zone - Automatic ejection / rejection system - Construction primarily in stainless steel - Integrated control panel - Configurable selection parameters - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The PROTEC BICS 2000 40C is designed to automatically inspect the product as it passes through the equipment. The product is distributed in a controlled manner before passing through the optical inspection zone, where the system analyzes its color characteristics and compares them with the previously established parameters. When out-of-specification product is detected, the rejection system automatically separates it, allowing the accepted product to continue to the next stage of the process. This system can be used for: - Color sorting Bdjdpfjynkdnox Aa Ieh - Removal of defective product - Separation of units outside specifications - Improvement of product uniformity - In-line quality control - Automatic classification APPLICATIONS Particularly suitable for processors of fruits and vegetables, legumes, nuts, frozen products, and other food industries that need to automate visual product selection. Depending on the installed configuration, it can be used for different solid and particulate products where color is a relevant parameter for determining their quality or classification. The combination of PROTEC technology, optical sorting, and automatic rejection provides an efficient solution for improving quality control in food processing industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!! Bedozx Agnjpfx Aa Isdh

Condition: used, Year of construction: 1996, operating hours: 14,240 h, 1996 | Sennebogen 625 M for parts only | Used Mobile Crane | 14240 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Bdodpfx Aozrlyqea Ish 💰 Buy Now for EUR 8800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: As a source for spare parts: Many components have already been removed. The engine and hydraulic pump are present, and the axles are complete. However, some hydraulic parts as well as the joysticks and displays are missing. The engine is also reported to have defects. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40537 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2015, Workpiece diameter: 1.0 – 25 mm Workpiece length with stop: up to 500 mm Smallest workpiece length: from 5 mm Longer lengths also possible without stop Cutting spindle approx. 5400/11120 rpm Grinding spindle 2160/4,450 rpm Cutting disc diameter 125 x 1.5 x 20 mm Grinding disc diameter 100 x 50 x 20 mm Dimensions and weight: Dimensions 800 x 450 mm x 1,100 mm Weight approx. 200 kg The precision length cutting machine was inspected and cleaned by me, defective components was renewed. The machine combines cutting and grinding in a single operation and is ideal for high-precision machining of small to medium-sized workpieces such as ejector pins, sleeves or punches. Ideally suited for: Tool and mould making Punching and forming technology Production of carbide and HSS tools Precision mechanics and manufacturing technology Bdodpfezrp Tbjx Aa Ieh Combined cutting and grinding in one machine High precision with short cycle times Suitable for steel, HSS and carbide

Condition: used, Ampere Rack Armour® shelf support protector, size M. Condition: used, good condition Manufacturer: Ampere System Product: Rack Armour® Size: M Suitable shelf support width: 88–100 mm Height: 600 mm Outer shell material: HDPE (high-density polyethylene), wall thickness > 7 mm Inner material: Highly flexible energy-absorbing foam Bsdpfx Aajzux Exe Ijdh Weight: approx. 1.2 kg Color: signal yellow Impact absorption: frontal impact up to 2.4 t Assembly: can be done without tools (assembly aid recommended), no floor fastening required Availability: we have several in stock, please inquire about the desired quantity! Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guardrails Grating Back wall grating Depth stops Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with competent and personal advice as your experienced specialist dealer for new and used shelving systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net, ex warehouse. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change. Items are subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. For new goods, the respective manufacturer's guarantees apply.

Condition: used, This package includes: 20 x crossbeams, 2,700 mm each (yellow) 40 x securing pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbeam length: 2,700 mm Crossbeam height: 140 mm Shelf load capacity: 3,000 kg Accessories such as: Floor mounting Connectors Load warning labels Impact protection Bjdpozuyrmjfx Aa Isdh Guard rails Grating Back panel grating Deep shelf supports Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we will provide you with competent and personal advice as your experienced specialist retailer for new and used shelving systems." Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change and non-binding. We reserve the right to sell items in the meantime. - Reservation of Title: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive sale to commercial businesses (§ 14 BGB). For used and IIa goods, there is an exclusion of liability for material defects. For new goods, the respective manufacturer's warranties apply.

Condition: used, This package includes: 38 x crossbars, 2,700 mm each (yellow) 76 x locking pins Bsdpfx Aaezuyrts Iedh - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbar length: 2,700 mm Crossbar height: 130 mm Shelf load capacity: 2,700 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guard rails Grating Rear panel grating Deep shelf supports Barrier rails and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are subject to change. Items may be sold subject to prior sale. - Retention of title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials and workmanship is excluded. For new goods, the respective manufacturer's warranties apply.