Used Deckel Fp for sale (679)

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 Gedpfxszq Hlfo Aafsuf tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis Active TNC 113 - Digital display Heidenhain, point-to-point control, stepless feed Technical data: >> Year of manufacture 1980, machine no. 2302-2430 >> 3 axes, digital active display TNC 113 >> Swivel-tilt table (clamping area 1000 mm x 520 mm) >> Speed: 25 - 2500 rpm >> Feed and rapid traverse in 3 axes Guodpszquq Nefx Aafsf >> Feed from 5 to 500 mm/min, stepless >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2 / 4 KW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be adjusted by an additional 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 2500 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant system About the machine: Offered is a Deckel FP3L universal milling machine in very good condition. The vertical head can be moved by 200 mm to enable an even larger working area. Even at maximum speeds, the milling machine runs smoothly. A central pump ensures lubrication of the various axes. The special feature of this machine type is its basic design; it is a machine with a slanted table bed. The movements are assigned to the spindle and thus to the tool. The accuracy is therefore very high, as different workpiece weights have no influence on the axis movements. Mechanically and electrically inspected. In this newer FP3L model, the feed can be adjusted steplessly in three axes; the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain point-to-point control, you can enter dimensions that the machine will automatically move to. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be delivered with CE conformity.

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Gjdpoxyk Upefx Aafsuf

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm Gedpfx Aaey E N Dvefjuf travel 580x400x450 mm max spindle speed 2500 rpm spindle taper 40

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t Gsdpfx Asztpx Tjafsuf

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Gjdpfxoxcbl Ds Aafsuf Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: good (used), Year of construction: 1975, Deckel FP2 – 3-axis milling machine with Fagor digital display. The machine is in good condition and comes from a training department. It features a universal swivel rotary table and an SK 40 spindle mount. Accessories include various collets and milling arbors. Good, operational condition. Can be demonstrated under power by arrangement. Guodpszruudofx Aafef

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2102-2821, Offer 26207 Technical data: - Machine originates from the Weser Ems vocational training center and underwent a complete overhaul at - FPS Werkzeugmaschinen GmbH in Warngau in 2015-2016. - Table size 600 x 220 mm - Working range of the axes: - X (longitudinal) 300 mm - Y (transverse) 340 mm - Z (vertical) 150 mm - Distance between table axis and stand 655 mm - Tool holder ISA 40 - 16 working spindle speeds 40 - 2000 rpm - Feed rates X - Y - Z axes 10 - 500 mm/min - Rapid traverse 1200 mm/min - Drive 400 V / 1.1 / 1.3 kW - Space requirement approx. W 650 x H 1600 x D 1000 mm - Weight approx. 600 kg - Including: Gusdpszrfifsfx Aafef - Positioning control with Active digital display - Adjustable vertical milling head with drilling spindle - Central lubrication system - Fixed angular table - Collet set, various holders + milling cutters - Rotary table - Drawer cabinet with drawers on roller bearings

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Gusdjygia Eepfx Aafsf Features: - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9585, DECKEL Universal Milling and Drilling Machine Model: FP 2 Machine No.: 9585 Year of manufacture: 1978/79 Condition: Good, operational condition Travel distances: longitudinal: 400 mm Godpjygicasfx Aafeuf vertical: 400 mm horizontal: 200 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C, stepless feed, light gray color, CE compliant, in excellent condition. Technical data: >> Year of manufacture 1980, machine number 2101-1423 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 700 kg Accessories and equipment: Gsdpfx Aezl Uz Djafeuf >> 3-axis digital display K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, backstop About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move easily. The bellows are all new. In this newer FP1 model, the feed is steplessly adjustable on two axes, and the machine also has a rapid traverse function. An oil change has been carried out. Mechanically and electrically inspected. Thanks to the new digital display from K&C, working with the machine is easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered on.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition. Accessories, CE compliant. Technical data: >> Year of manufacture 1992, machine no. 2102-7007 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable on spindle head by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 Gjdozl Ebbepfx Aafjuf >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, counter holder About the machine: Offered is a Deckel FP1 universal milling machine in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine with a plug. This makes it easier to transport the machine. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically move to. The FP1 was used in a training workshop, where it was only used occasionally. An oil change was performed. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Serial number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travel distances: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Gujdpezmhlfefx Aafjf Tool holder: SK40 Without machine vice.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Dear Sir or Madam, We hereby offer a milling machine, type Deckel FP3. The machine has been thoroughly inspected in our workshop and is in very good condition. We would be happy to install safety or additional equipment for you directly. We look forward to receiving your inquiry! Delivery time: Available immediately Dimensions: 2.00 x 1.60 x 1.90 m (L x W x H) Weight: approx. 1500 kg Travel distance X-axis: 500 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 380 mm Table clamping area: 800 x 420 mm Speed range: 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500 mm/min Rapid traverse: approx. 1500 mm/min Additional equipment and accessories: Technical documentation, leveling feet, spanner, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine you choose - You can freely decide on the paint color of the machine you choose - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We will gladly take care of the shipping and/or installation. Guedpszldpkofx Aafjf

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, Dear Sir or Madam, We are offering a Deckel FP2 Aktiv for sale. This newer model stands out primarily due to its stepless speed control with Heidenhain Aktiv control, which makes operation very easy and extremely comfortable. The machine has been thoroughly inspected in our workshop and is in very good condition. You are welcome to inspect it on-site. Delivery time: Available immediately Machine no. 2202-xxxx Table: fixed angular table or swivel-tilt table Travel: X400mm/Y220mm/Z400mm Drive power: 3KW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Gsdpozldnasfx Aafsuf Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis digital display Heidenhain, stepless feed control in all 3 axes, Heidenhain digital display with Aktiv control, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the machine of your choice - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We will gladly take care of shipping and/or installation

Year of construction: 2008, condition: ready for operation (used), A universal tool milling machine by Friedrich Deckel, overhauled in 2008 and originally built in 1989, is available. Travels X/Y/Z: 560mm/500mm/450mm, table dimensions X/Y: 900mm/530mm, max. table load: 450kg, tool taper: SK40, quill stroke: 80mm, milling head swivel: +/-90°, spindle speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Gsdpfx Ajzqu E Hsafeuf

Condition: used, Rotary encoder, tachometer, encoder Gjdpfx Aoffh N Asafjuf -Spare part comes: from a machining center cover type FP3A -Number: 1x speedometer available -Price: per piece -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Condition: used, Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm Gsdpfx Aeffh Nzjafjuf -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Guedpfxowrdu Ao Aafof Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, machine/vehicle number: 2810 - 4271, x-travel:500 mm y-travel:400 mm z-travel:450 (390) mm surface of table:710 x 430 mm spindle speed max.:40 - 4000 U/min feed range:10-2000 mm/min rapid traverse:4,0 m/min spindle drive motor:4,0 kW tool taper:SK40 control:CNC Contour 3 Gujdpfjh Ra Izox Aafof power capacity:9 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,4 x 2,3 x 2,3 m Deckel FP4 NC Machine for Medium - Heavy range use. - Spindle Head can be swiveled 90° (left or right) - Universal Work Table ( 710 x 430 mm ) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872. - Deckel Contour 3 CNC control Systems. - Portable Electronic handwheel and Handheld operating unit for easy Setting and control. - Powerful 2.2 kw Siemens Axis Servo motors and 4.0 kw Motor for Main Spindle. The machine has Central Lubricant system, Seperate Power cabinet, Enclosed Chip tray and Splash cabin

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP4M Active Manufacturer: Deckel Type: FP4M Condition: used, good Digital readout: 3 - axis digital readout Heidenhain Travels: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 - 2500 rpm Tool holder: ISO 40 Hydraulic tool clamping Drive power: approx. 6.0 kW Feed rates & rapid feeds: in all 3 axes Feed range: approx. 8 - 630 mm/min Rapid traverse: approx. 3.0 m/min L x W x H: approx. 2300 x 1800 x 1800 mm Gedpfxszgvmde Aafjuf Weight: approx. 1750 kg Machine light Spindle guard Scope of delivery: - 10x tool holders - Allmatic high-pressure vice - documentation - Spindle guard

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, spindle speed (max.): 2,000 rpm, spindle speed (min.): 80 rpm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, Universal milling machine Deckel FP1 – Very good condition For sale is a Deckel FP1 universal milling machine in very good, well-maintained condition. The machine is equipped with a 3-axis digital display Heidenhain TNC 113 and stepless feed in all three axes. The Deckel FP1 is known for its precision, reliability and durability and is ideal for toolmaking, single-part production, repair work and training companies. Technical data Manufacturer: Deckel Gsdjzlnmmjpfx Aafeuf Model: FP1 Year of manufacture: 1985 Machine number: 15082 Spindle speed: 80–2,000 rpm Drive power: 1.6 / 2.0 kW Stepless feed in X, Y and Z axis Rapid traverse in all three axes Travel ranges (X/Y/Z): 300 / 160 / 340 mm Fixed angular table Vertical milling head on spindle head, adjustable by 100 mm Vertical and horizontal spindle with SK40 collet Clamping system: S20x2 Spindle brake Space requirement: 1.30 m x 1.10 m x 1.60 m (L x W x H) Machine weight: approx. 850 kg Equipment - 3-axis digital display Heidenhain TNC 113 - Hydraulic vise - Coolant system - Operating manual The machine is in very good technical and optical condition and is ready for immediate use. An inspection and a test run can be arranged at any time by appointment.

Condition: ready for operation (used), Deckel Maho 2238-4630 rotary table SN: 0174 for FP4-60 machine – diameter: 63cm / height: 43cm, used, normal signs of wear, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Gujdpfx Asy Np Naeafef

Condition: ready for operation (used), Deckel Maho tool holder for Deckel Maho FP4-60 milling machine, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Gjdpfey Np Ngjx Aafsuf

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 20031, CNC milling machine with rotary table and tool changer Control system: Contur 3 Tool holder: SK 40 Godpezlkw Iefx Aafouf Accessories: Vise, drilling head Wiring diagrams and documentation available.