Used Deckel Fp2 Nc for sale (693)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Dwjdpfjwid Spjx Acyed Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2836-0192, Machine in good used condition, Dialog 11 control. Until recently, it was only rarely in operation in our own workshop. Documentation/manuals etc. are available. Additional accessories, cutters, zero point probes, etc. can be purchased optionally. Dodpfoylawxsx Acyowd

Condition: good (used), Year of construction: 1970, Deckel FP2 with 500mm travel, Huttelmaier retrofitted tool milling machine with 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. Adjustable table, electrically locked milling guard, SK 40 spindle mount. Accessories: various collets and milling chucks. Good, operational condition. Can be demonstrated under power by arrangement. Djdpfxo Aih Tpo Acyowd

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2838-0410, overall weight: 2,500 kg, We are offering this used DECKEL FP4 NC universal milling and drilling machine, manufactured in 2003. Manufacturer: DECKEL Model: FP4 NC Year of manufacture: 1981, general overhaul in 2003 Machine type: Universal milling and drilling machine Dwjdpfe Ah Dlhsx Acyed If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min Djdpox Ndbqofx Acyewd quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. Dwsdpfx Ajxfkm Ajcyod We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Tool milling machine Deckel FP 2 / 3-axis digital display "NEW" / ORIGINAL CONDITION from a university -Travel ranges X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds and rapid traverses in all three axes -Tool holder ISO 40 -Vertical / Horizontal milling attachment -Fixed swivel table -Coolant system -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet Dsdsztdl Ijpfx Acyewd -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors and omissions excepted.

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system Dwsdszu Nhwspfx Acysd -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 2801 002016, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, quill stroke: 80 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table width: 620 mm, table length: 390 mm, table load: 250 kg, overall weight: 1,700 kg, space requirement width: 1,800 mm, space requirement length: 1,400 mm, space requirement height: 1,800 mm, input frequency: 50 Hz, Equipment: documentation/manual, The machine is very stable and robust in its design and construction. Thanks to its good accessibility, it is extremely user-friendly. The machine can also be operated using mechanical handwheels. CNC Contouring Control DECKEL Dialog 4 Easy-to-program 3D path control with color graphic support, dialog-guided cycle input, contour calculator, editor functions, clear program and tool management, and the option for parallel programming. Travel distances X / Y / Z: 300 / 300 / 400 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull stud according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manual quill stroke: vertical 80 mm and horizontal 65 mm. Milling head: Manually swiveling +/- 90° Speed range: 31.5–6300 rpm stepless, geometrically stepped direct gearbox for maximum torque and milling performance at the working spindle. Djdpfjywhvhox Acyewd Direct gearbox for maximum torque and milling performance at the spindle. Feed rate: 2–3600 mm/min, infinitely variable feed Rapid traverse: 4000 mm/min Angular table: 620 x 390 mm, max. load 450 kg

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Manufacturer: Deckel Type: FP2 Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Spindle stroke, vertical: 60 mm Spindle stroke, horizontal: 100 mm Feed rates: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Dodsilg H Eopfx Acyowd Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirement L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine in operation at your location. All information is subject to change without notice. Subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2819-1160, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 300 mm Travel range Y-axis: 300 mm Dsdj Ah Slzspfx Acyjwd Travel range Z-axis: 400 mm Clamping area: 390 × 620 mm Spindle speed: 40–2,500 rpm Spindle taper: SK 40 Quill travel: 60 mm Rapid traverse: 4.0 m/min EQUIPMENT Chip collection tray

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 9502, year of manufacture approx. 1978 >> Swivel-tilting rotary table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical and horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Djdpo Afy Ngofx Acyowd Accessories and equipment: >> Coolant system >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be easily moved. Most of the bellows are new. The previous owner installed a brake motor. An oil change was carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered up. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 RPM >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW Djdpfj Agn Rxex Acyowd >> Travel distances X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on site while it is powered. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Dodozac Sbopfx Acyowd

Condition: excellent (used), functionality: fully functional, 1x Universal milling machine Deckel FP4 NC Dialog 3 1x Universal milling machine Deckel FP4 NC Dialog 4 Manufacturer: Deckel Type: FP4 Condition: used, good ----- Travel ranges: X-axis: approx. 500 mm Dwsdpfx Acj Acd Tboyed Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 ----- Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds and rapid traverses: in all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverses: approx. 3.0 m/min ----- L x W x H: approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg *Machine light *Spindle guard Scope of delivery: * 5x tool holders * Allmatic vise * Walter dividing head * Documentation * Spindle guard

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 Dodpj Agwvmefx Acyowd >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: excellent (used), Year of construction: 1979, Deckel FP2 Aktiv tool milling machine with 3-axis Heidenhain TNC 111 Aktiv digital readout. The machine is in very good condition and comes from a state training department. Fixed table, SK 40 spindle taper. Accessories: various collets and arbor holders, tailstock. Very good, ready-to-operate condition. Can be demonstrated under power by arrangement. Dsdpfx Acsxyhmvsyewd

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, feed length X-axis: 560 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, overall weight: 2,500 kg, Metal milling machine DECKEL, type FP4 NC, Heidenhain control, year of manufacture 1983, table size 900 x 530 mm, including a large number of tools. Dsdpfxszg Axms Acyewd Working area and travel ranges: X-axis (longitudinal): 560 mm, Y-axis (transverse): 500 mm, Z-axis (vertical): 400 mm (some tables or versions indicate up to 450 mm). Table size (standard tilting table): approx. 900 x 530 mm. Milling spindle & drive: Tool holder: SK 40. Speed range: 31.5 to 3150 rpm (geometrically stepped via manual or mechanical gearbox). Quill stroke: Vertical quill extendable by 80 mm, horizontal quill 65 mm. Spindle motor power: approx. 2.7 kW to 4.0 kW.

Condition: good (used), Year of construction: 1966, Universal milling machine cover FP2 -WKG 512- On offer here is a universal milling machine from the manufacturer Deckel, type FP2. Technical data Dwsdpeurk Exjfx Acyjd Manufacturer: Deckel Model: FP 2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Hydr. vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm - 17.5 mm

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Dwsdeumclaepfx Acyod

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: Dwedovbifgopfx Acyed >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Condition: new, centre height // mm total power requirement / kW weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW Dwsdpfjzcgfqex Acyod

Condition: used, Year of construction: 1985, machine/vehicle number: 31268, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Dwedpfs Aa At Ujx Acyod TECHNICAL DETAILS General Information Machine type: universal tool milling machine Machine weight: approx. 6.6 t Travel distances X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Quill stroke: 115 mm Work table Table surface: 900 × 700 mm Table swivel range: ±30° Table tilt range: ±30° Table rotary range: ±45° Spindle and milling head Spindle speed: 30–6,000 rpm Spindle mount: SK 50 Spindle drive: 7.5 kW Milling head: swiveling in 2 axes Feed Feed rate: 0–6,000 mm/min Control Control system: Siemens Sinumerik 3 M Performance data Total power requirement: 32 kW Dimensions Space requirement: approx. 3.8 × 1.8 × 2.9 m EQUIPMENT Separate control cabinet Coolant system Automatic central lubrication Work light Safety emergency stop

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm Dwsdpfx Aoh Ty Hkecyod surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Condition: used, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, Vertical Milling Machine Manufacturer: DECKEL Model: FP 4 NC Control System: Dialog 11 Technical specifications: Dodpezq Hk Uefx Acyewd - X-axis travel: 560 mm - Y-axis travel: 500 mm - Z-axis travel: 410 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.