Used Debark for sale (124)

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Nedpfx Adjx Dip Hs Nowb Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors.

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Nsdexr Ityjpfx Ad Nswb Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: used, Bark remover Cambio 500 in good condition Nwedswi Iz Iepfx Ad Nsb

Condition: ready for operation (used), Debarking drum in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Nedpfsw N Rxbox Ad Nowb

Year of construction: 1989, condition: excellent (used), the subject of the sale is a feeder and a receiver for the sagem debarker. 100% functional Nwjdpfx Adjlx Nu Ue Nob

Condition: excellent (used), debarker cross feeder 4 x 5 m longitudinal feeder 13 m x 90 cm chain width 50 cm Nsdpev Ikqksfx Ad Newb

Condition: good (used), log diameter 100-660mm Njdsv Ap Sispfx Ad Nswb transverse and longitudinal feeder included

Condition: new, Year of construction: 2025, functionality: fully functional, For sale: NEW debarker with reducer for root swellings. Year of manufacture: 2025 Technical specifications: Log diameters: 15-60 cm Log length: 100-300 cm Installed power: 60 kW Additionally: -> Log handling on the roller conveyor, Njdpswxvv Sefx Ad Nowb -> Hydraulic ejection of debarked logs, -> Hydraulic centering pressure system. -> Horizontal bark conveyor included. -> All-season operator's cabin.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Nsdopbbmlopfx Ad Nswb

Condition: used, Spepdiscs 15" Nwedpouk Sk Hsfx Ad Njb

Condition: good (used), - usefull spare parts for VK 26 Njdpfoxnn U Asx Ad Nowb - feeding wheels - assembling tools - different small items and parts for different purposies - the main frame of the rotor

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Nodpfxexhdtzj Ad Newb 6-month warranty

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) Nedpsfn Iu Isfx Ad Newb - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Condition: refurbished (used), Complete set of debarking knives for Valonkone VK26M consisting of: Nwodpeq A Ic Ajfx Ad Nob 4 pre-cutters 4 main cutters *Incl. metal box

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor with start for 4 kw geared motor infeed with start for 4 kw geared motor output Njdpfotwrp Dsx Ad Newb Main starter Emergency STOP

Condition: excellent (used), functionality: fully functional, I will sell a HAWA debarker Very good condition Njdpfx Adewnzq Ts Njwb

Condition: as good as new (ex-display), functionality: fully functional, Debarking machine Valon Kone 26 MX - About 6000m3 debarked with the machine - Built as a prototype - Frame extended and additional support rollers added for debarking longer material - Debarking input automatic Nwedpfx Aeuhcf Isd Nsb - Equipped with two frequency converters to adjust the speed - Ready for OmronSysac or other measuring device - Platform/undercarriage built in 1991 - Crane Epsilon 21TM/year -91 - Renovated in summer -23 - Machine/plant weight: 27 tons - Length: 15 m - Combination length 22m when transported. Also included: Scania 143 - Year 1991 - Air suspension on rear axles - Robson - Registered as a work machine Aggregate: Stamford 250 kw/Perkins 2000 series 340 hp - Hours of use, about 4000h - Perfect condition

Condition: like new (used), Debarker with hydraulic infeed Nwedpfx Ajrwwxaed Njb

Condition: used, Debarker bezner 40-140. Working. Video by request. Njdpfjwkkbtsx Ad Njwb

Condition: used, Valon Kone VK450 with infeed conveyor. Nwsdpfx Adevt S R Ae Njb

Condition: used, Valon Kone VK26M Nwsdpfxovgtz Ne Ad Nob With infeed and outfeed conveyors.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Nwodpfx Astk N Dked Neb

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Njdoxg Tthspfx Ad Nowb Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Manufactured in 2005 Serviced in 2023, not in use since

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Nwedpfjwfp Saex Ad Nob

Condition: reconditioned (used), VK 450 The debarker has been completely refurbished Nodpfxoq Hr N Ij Ad Njwb