Used Dark Radiator for sale (1,000)

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,300 kg, emission class: euro6, color: grey, number of seats: 3, Year of construction: 2025, Equipment: air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Digital tachograph TECHNO PLUS PACKAGE KIT EASY DRIVING 3 PACKAGE Suspended driver's seat (air-cushioned seat) Spare wheel Reinforced suspension (double leaf springs - rear) Additional equipment: Passenger airbag, Driver airbag, Standard exterior mirrors (vehicle width up to 2200 mm), 95 Ah battery, Digital roof antenna (short), Rear acoustic parking sensor, Driver assistance system: Pedestrian detection and warning, Cruise control system including speed limiter, Front cup holders and storage compartment, Urea tank (AdBlue): 19 liters, Rear wing doors (opening angle 180 degrees), Rear wing doors without glazing, Bodywork/Construction: High-capacity van (standard), Fuel tank: 90 liters, Radiator grille frame in gloss black, Cargo partition wall, Model update, Engine 2.2 liter – 103 kW Blue-HDI FAP CAT (2184 cc), Wheelbase 3450 mm, Tire pressure monitoring system, Low-emission according to Euro 6e emissions standard, Sliding door right side (cargo/passenger compartment), SCR system (AdBlue technology), Electronically controlled power steering, Safety package, Cabin seats: Dual passenger seat (including automatic seat belt), Cabin seats: Driver seat with armrest, height adjustable, Cabin seats: Driver seat with lumbar support, Start/stop system, Daytime running lights, Lashing rings in cargo area, Seat belt warning system (front), Permissible gross vehicle weight 3.30 t Bljdpfex Ayp Usx Abbor Errors, changes and prior sale reserved. The equipment details in this listing do not constitute a guaranteed characteristic in the legal sense and are for general information only. Binding equipment features are solely the subject of the purchase contract.

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood Blodpok H Ic Usfx Abbjr RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: used, mileage: 177,082 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2013, next inspection (TÜV): 12/2025, emission class: euro5, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, parking heater, soot filter, Special features: Differential lock Blsdpfew S Ahtsx Abbsr Additional equipment: Driver/passenger airbag, Active front head restraints, Audio/radio remote control on steering wheel, Audio system: radio with CD player, Electrically adjustable and heated exterior mirrors, Exterior mirrors with puddle lighting, Body-coloured exterior mirrors, Outside temperature display, Turn signals integrated into exterior mirrors, Bluetooth interface, On-board computer, Brake assist (Nissan Brake-Assist), Electronic Brakeforce Distribution (EBD), Electric front and rear windows, Side protection, Bluetooth hands-free system, Cup holders in centre console, Seatbelt tensioners, Leather handbrake lever, Heated rear window, ISOFIX child seat mountings, Body/Car type: Double Cab, Body/Car type: Pick-up, Dual-zone automatic climate control, Head airbag system, Chrome radiator grille, Height-adjustable steering column, Alloy wheels, Facelift model, Engine 2.5 litre - 140 kW dCi diesel CAT, Radio pre-installation, 6 speakers, Wheelbase 3,200 mm, Full-size spare wheel, Split/folding rear seat, Low emissions according to Euro 5 standard, Leather gear lever/selector, Side airbags, Height-adjustable front seat belts, Height-adjustable driver's seat, Seat covers/upholstery: fabric, Heated driver's seat, Sun visors with mirror, 12V socket in centre console, Rear bumper chrome, Partially body-coloured bumpers, Side steps, Interior door handles chrome, USB interface, Tinted glass, Heat-insulating glass with UV protection

Condition: used, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, wheelbase: 4,490 mm, overall weight: 3,500 kg, empty load weight: 2,330 kg, maximum load weight: 1,170 kg, first registration: 10/2025, next inspection (TÜV): 10/2027, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,960 mm, loading space volume: 15.5 m³, emission class: euro6, color: grey, number of seats: 3, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, Body variant: High roof in body color, Climatic air conditioning (driver's cab), central locking with remote control and interior operation, external mirrors electrically adjustable and heated, electric front windows, Multi-Function Display Plus, Driver Assistance System: Hill Start Assist, Driver Assistance System: Lane Keeping Assist (Lane Assist), Driver Assistance System: City Emergency Braking Function, Driver Assistance System: Surround Monitoring System (Front Assist) with City Emergency Braking Function, Driver Assistance System: Traffic Sign Recognition, Driver Assistance System: Fatigue Detection Sensor, Cruise Control System (including speed limiter), multifunction steering wheel, Driver Assistance System: Front and rear parking sensors, Spare wheel with standard tires incl. on-board tools and jack, rain sensor, LED headlights, LED daytime running lights, digital radio reception (DAB+), touchscreen, Bluetooth mobile phone interface, multimedia interface 2 x USB (Type C) front, Mobile Online Services App-Connect, emergency call system, tire pressure monitoring system, heat-insulating glazing, Storage Package 2, driver airbag, airbags for driver and front passenger - passenger airbag can be deactivated, anti-lock braking system (ABS), electronic stability program (ESP), light assistant (Coming Home - Leaving Home), engine start/stop system, particulate filter, sliding door loading/passenger compartment on the right, electronic immobilizer, headlight range adjustment, on-board tools and jack, electro-mechanical power steering, paint finish: Ascot Grey, rear right step, cab seats: double passenger seat with storage/compartment and foldable backrest as a table, cab seats: ErgoComfort suspension seat – driver’s side (20-way adjustable), front bumper in grey with trim in body color, basic driver assistance package, reinforced front axle, trailer coupling: fixed ball head, trailer stabilization program, truck registration, compartments: 2-DIN slot front under headliner, cab interior lighting: front reading lamp, permitted total weight 3.50 t, underbody airflow optimization, radiator grille with top chrome strip, convex exterior mirror – left, convex exterior mirror – right, LED indicators integrated into exterior mirrors, automatic headlight control, side marker lights, audio system Composition Colour (radio / SD card interface / USB), cab flooring: rubber, entry handle on rear left C-pillar, entry handle on rear right C-pillar, grab handles A-pillars, lockable glove compartment, 2 foldable remote keys, seatbelt warning system (driver/passenger side), cab LED interior lighting, LED interior lighting in load/passenger compartment, twin-tone horn, sockets (12V) in cab (2 pcs), lashing eyes in load compartment, Driver Assistance System: Brake Assist (HBA), adjustable steering column (steering wheel), Driver Assistance System: Crosswind Assist, SCR system (AdBlue technology), body / build: standard high roof panel van, wheelbase 4490 mm, drive type: front-wheel drive, 6-speed transmission. Over 150 transporters and buses in stock. Financing or leasing available via Santander Consumer Bank, Bank 11 or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Equipment listed should be checked separately if necessary. Subject to change, error, and prior sale. Delivery available for an additional charge. Export license plates available on site. Trade-in of your old vehicle possible. Retrofi Bsdpfx Aevv R I Eobbelr

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Blodpfx Absxw Uyqebor Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,340 mm Number of bays / row of shelves: 01 pcs. 1,280 mm each Number of levels plus base level: 08 pcs. The scope of delivery includes: 02x shelf uprights, second choice Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. cross and diagonal braces The uprights are unassembled 1,534 mm high 300 mm deep 08x shelves, second choice Material color: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm f. Stand depth: 300 mm Weight per unit: approx. 4.79 kg 01x Pedestal cover, used Material color: sendzimir galvanized Dimensions: C 28 x 22 x 8 x 0.6 mm Weight per unit: 0.71 kg 01x Cross brace, II. choice Designation: KV31013 Material color: sendzimir galvanized 48x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 321 G Color: dark grey Material: Polypropylene External dimensions (LxWxH): approx. 209 x 145 x 343 mm Weight per unit: 0.550 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation Bodpjt Hdgfsfx Abbslr or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,300 kg, emission class: euro6, color: grey, number of seats: 3, Year of construction: 2025, Equipment: air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Digital tachograph TECHNO PLUS PACKAGE KIT EASY DRIVING 3 PACKAGE Bjdex Ayqfjpfx Abbelr Suspended driver's seat (air-cushioned seat) Spare wheel Reinforced suspension (double leaf springs - rear) Additional equipment: Passenger airbag, Driver airbag, Standard exterior mirrors (vehicle width up to 2200 mm), 95 Ah battery, Digital roof antenna (short), Rear acoustic parking sensor, Driver assistance system: Pedestrian detection and warning, Cruise control system including speed limiter, Front cup holders and storage compartment, Urea tank (AdBlue): 19 liters, Rear wing doors (opening angle 180 degrees), Rear wing doors without glazing, Bodywork/Construction: High-capacity van (standard), Fuel tank: 90 liters, Radiator grille frame in gloss black, Cargo partition wall, Model update, Engine 2.2 liter – 103 kW Blue-HDI FAP CAT (2184 cc), Wheelbase 3450 mm, Tire pressure monitoring system, Low-emission according to Euro 6e emissions standard, Sliding door right side (cargo/passenger compartment), SCR system (AdBlue technology), Electronically controlled power steering, Safety package, Cabin seats: Dual passenger seat (including automatic seat belt), Cabin seats: Driver seat with armrest, height adjustable, Cabin seats: Driver seat with lumbar support, Start/stop system, Daytime running lights, Lashing rings in cargo area, Seat belt warning system (front), Permissible gross vehicle weight 3.30 t Errors, changes and prior sale reserved. The equipment details in this listing do not constitute a guaranteed characteristic in the legal sense and are for general information only. Binding equipment features are solely the subject of the purchase contract.

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray Blsdpfxjwag Rij Abber The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, mileage: 14 km, power: 96 kW (130.52 HP), fuel type: diesel, wheelbase: 4,332 mm, overall weight: 3,500 kg, first registration: 10/2025, next inspection (TÜV): 10/2027, color: white, driver cabin: other, number of seats: 7, construction height: 2,498 mm, working width: 2,080 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, soot filter, traction control, Air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric front windows, cruise control, multifunction steering wheel, cargo area partition with window (grilled), light and rain sensor, wipers with rain sensor, LED daytime running lights, radio, touchscreen, hands-free system, Apple CarPlay, Android Auto, heat-insulating glass, tachometer, driver’s airbag, anti-lock braking system (ABS), traction control system (ASR), particulate filter, full service history, sliding door for cargo/passenger area right side with window, immobilizer, side marker lights, outside temperature display, power steering, permissible gross weight 3.50 t, body/build: box van double cab standard, radiator grille with chrome trim, automatic headlights, front mud flaps, fixed window in cargo/passenger compartment front left, gear shift indicator, interior filter: pollen filter, cabin seats: multifunctional twin passenger seat, cabin seats: height-adjustable driver’s seat, cabin seats: driver’s seat with armrest, cabin seats: 2nd row 4-seat bench, overhead storage shelf, lashing points in cargo floor, electronic brakeforce distribution, brake assist, height-adjustable steering column (steering wheel), electronic stability program (ESP), 185 A alternator, body/build: high roof box van standard, wheelbase 4332 mm, drive type: front-wheel drive, 6-speed transmission Financing Example * Cash price: €45,101.00 * Down payment: €9,020.00 * Term: 60 months * Net loan amount: €36,081.00 Bodpfexl Uxcox Abbolr * Effective annual interest rate: 5.99% * Fixed borrowing rate p.a.: 5.83% * Gross loan amount: €41,683.00 * Monthly installment: €695.00 *Representative financing example from Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach for private customers, for which the dealership acts as a loan intermediary. Subject to credit approval. Figures simultaneously illustrate the 2/3 example pursuant to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing available via Santander Consumer Bank, Bank 11, or Auto Europa Bank – we’re happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed features may require specific verification. Subject to changes, mistakes, and prior sale. Delivery available at extra cost. Export plates available on site. Trade-in of your old vehicle possible. Retrofitting of: – Trailer hitches up to 3,500 kg possible – Parking heaters – Screens for reversing cameras and/or sat-nav via mobile (Android Auto) – Reversing camera systems – Workshop fittings – Cruise control – Tail lift installation and various other individual solutions for your business needs available at extra cost.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C Blsdpfx Abeup T Uqebjr approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Bsdpfx Abjhaapfobelr Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), TAMAR Type: FEMET_WI_ID071_TAMAR light microscope PLMIS Light microscope The TAMAR light microscope ID071 is used for the optical inspection of samples with a maximum size of approx. 780x650mm2 (substrate size) in the PLG clean room. Substrate size complete substrate size (780x650mm2) Bljdpfeh Nmtgox Abber Objective: The objective focuses the light emanating from the observed object into a real image for the viewer. Bright field mode (BF), the light coming from the microscope is directed through the objective to the sample. High resolution, low contrast Dark field mode (DF)  Illumination mode to increase contrast, high contrast for edges and particles. Principle: The center of the incident light beam is covered, only peripheral light is directed through the objective and hits the side of the sample. Edges and particles appear bright and the smooth background dark. TAMAR light microscope ID071 X-Y Stage Software Revision 1.0 Condition: used Scope of delivery: (Autosampler as shown) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Bljdpfxeklv H Ie Abbsr Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Bledpfx Aowycatebbjr Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, CEM CEM Smart 5 Turbo Model 907990 Professional Microwave Moisture Analyzer for Moisture and Solids Analysis Reliable Laboratory Analytics in Record Time The CEM Smart 5 Turbo is a state-of-the-art microwave drying system for rapid and precise determination of moisture and solids content in a wide range of samples. Ideally suited for applications in the food, chemical, pharmaceutical, and environmental industries, this device saves significant time while maintaining consistently high measurement accuracy. Product features: Turbo technology with Intellitemp™ – Optimal temperature control prevents burning or crust formation on the sample. Fast analysis times – results within 60–180 seconds High precision – measurement range from 0.1% to 99.9% moisture or solids Versatile – suitable for solids, pastes, sludges, and liquids User-friendly touchscreen operation Interfaces – RS-232, USB, LIMS-compatible Typical applications: Cheese, dairy products, meat Paints, coatings, plastics, polymers Sludges, wastewater, organic residues Creams, pastes, emulsions Technical Data – CEM Smart 5 Turbo Feature Device type: Microwave moisture analyzer / moisture analyzer Technology: Microwave drying with Intellitemp™ temperature control Moisture range: 0.1% – 99.9% Sample types: solids, liquids, pastes, sludges, emulsions Analysis time: typically 1–3 minutes Drying method: direct microwave radiation (non-rotating) Temperature control: automatic (microwave-controlled, no fixed °C value) Weighing unit: Optionally connectable external scale (resolution up to 0.001 g possible) Display / Operation: color touchscreen, intuitive menu navigation Data interfaces: RS-232, USB, network (LIMS-compatible) Documentation: Barcode scanner & thermal printer (optional) Power supply: 230 V / 50–60 Hz Dimensions (W × D × H): approx. 41 × 44 × 37 cm Weight: approx. 18 kg Condition: used Scope of delivery: (see picture) Bjdpowv Ryyjfx Abbelr (Subject to changes and errors in technical data and information!) If you have further questions, we will gladly answer them by phone.

Condition: excellent (used), CTS test cabinet climatic chamber Here we offer a CTS climatic chamber. Air cooled Test chamber volume: 200 liters Test chamber dimensions: Height 750, width 650, depth 400 mm External dimensions: Height 1800, width 920, depth 1345 mm Temperature working range temperature range: -40°C / +180°C cooling speed: 4 K / min heating speed: 4 K / min Max. heat radiation at +20°C: 3500 W Temperature constancy, temporal: ≤± 0.3 K. Climate working range Temperature range: +10°C to +95°C. Humidity range: +10%to +98% r.H. Connection: 400 V +6% -10%, 3/N, 50 Hz Rated current 9.4 A Rated power 4,8 kw Weight: approx. 450 kg Bsdpjhwhzwsfx Abbjlr Refrigerant R404A Type: CTS C-40/200 The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C Blodpjrivfcsfx Abber approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm Bsdpfxovitmde Abbolr External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Bljdpfsu U Ixmjx Abber Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS climate chamber climate test cell Here we offer a CTS climate chamber climate test cell. Available from mid-January 2023! Water cooled Height adjustable! Bsdpfxoip Dp Se Abbslr Footprint approx. (W x D x H): 3755x 3470x 2480 Test area approx. (W x D x H): 2500x 2720x 2200 Test space volume: approx. 15m³ Temperature range: -40°C to +140°C Temperature deviation 1 K temporally Temperature change speed in the average without heat radiation Measured in the supply air heating: 2 K/min Cooling: 1 K/min from +110°C to -35°C Climatic tests: Temperature range: +10 °C to +90 °C Humidity range . +30 % to +95% r.H. dew point range : +5°C to 89°C temperature deviation 0,5 K temporal Humidity deviation ±1- ±3% r.H. temporal nominal voltage: 400V 3/N, PE, 50 Hz rated power: 53,5 KW Rated current: 92,3 A Compressor: S6J-16.2 + chiller Refrigerant: R404A Weight 5500 kg Type: CW-40/16 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Bljdpfexbd Rajx Abber Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Blsdeihb Amjpfx Abbsr Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: excellent (used), CTS Type: C-40/1000 CTS climatic test chamber Condenser chiller air-cooled Bjdpforu Dzujx Abbslr Control: 32 bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature test: Temperature range: -40°C to +180°C Temperature change rate Heating speed 2.0 K/min Cooling rate 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K in time Heat radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working range: Temperature range +10°C to +95°C Humidity range 10 to 98% r.h. Dew point range I +7 to +94°C Dew point range II -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K in time Humidity constancy I, temporal ± 0.5 to ± 1.5 % r.h. Humidity constancy II, temporal ± 1 to ± 3 % r.h. Panorama window 570 x 710 mm Test chamber dimensions Width 1000 mm Depth 1100 mm Height 900 mm External dimensions Width 1270 mm Depth 2220 mm Height 1950 mm Test chamber volume 1000 liters Pipe feed-throughs, ø 50 Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Bljdpfevb E Uqex Abbjr Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, Bsdpfevb Hanex Abbelr infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.