Used D20 for sale (239)

Condition: used, Year of construction: 1975, pressure 200 t stroke 20 - 200 mm ram adjustment 130 mm daylight (stroke down, ram adjustment above) 380 mm table surface area 1150 x 800 mm no. of strokes 25 - 75 Hub/min Fsdpjyhq Sxofx Agxjgi total power requirement 9,8 kW dimensions of the machine ca. L 1,7 x B 3,0 x H 3,8 m

Year of construction: 2012, condition: like new (used), Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control Fsdpeikbdvjfx Agxjgi

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,429 h, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: telescopic, construction height: 1,370 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck stacker Load center: 600 mm Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Fgedpfxey A Ub Ue Agxoi Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Still Battery type: PzS Battery year: 2020 Description: In addition to this unit, we offer a range of forklifts and warehouse equipment. All our machines are workshop and FEM 4.004 inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we are interested in purchasing your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing options are available on request and at attractive rates. We are happy to advise you competently and in detail about our vehicles. Load backrest, impulse control, initial lift, non-marking tires, double-deck loading,

Condition: good (used), Rotaval H.D.200 Rotor: stainless steel Housing: aluminium Fgjdpfeyyziyox Agxoi Rotor clearance: Drive end: 0.18 mm Non-drive end: 0.18 mm Radial: 0.18 mm

Condition: good (used), MANUFACTURER: KAESER MODEL: DSD201 S/N: 1089 YEAR: 2001 POWER (kW): 110 Fgedpfx Asyaq Tgsgxji CAPACITY (m3/min): 20.9 PRESSURE (bar): 8

Condition: good (used), machine/vehicle number: 16523, Year of construction: 2019, operating hours: 3,011 h, load capacity: 1,200 kg, lifting height: 1,924 mm, free lift: 1,230 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,960 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire size: , rear tire size: , enginetype: Electric, manufacturer: Still Fgodexz Spqopfx Agxji Serial Number: W41615V00007 Battery Details: 24 Volt

Condition: excellent (used), Year of construction: 1984, machine/vehicle number: RS118/2, Technical data: 1 Zasche / steel ZHD 2000 pillar jib crane NL 2000 KG Payload at full reach 2000 KG / 2 tonne payload Height: approx. 3.5m, UK boom: approx. 2.45m Reach: approx. 3m, hook height: approx. 2.45m Total weight approx. 1000 kg with steel chain hoist 2000KG Fgjdpevzkw Defx Agxsi Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping by freight forwarder or collection by appointment

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Fgsdpfx Ajx Dm Tvegxei Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: used, Gasoline-powered welding generator – Honda GX270 engine WELDING Welding current: 20 ÷ 200A Welding current (60% duty cycle): 200A Welding voltage (open-circuit voltage): 72V NOMINAL OUTPUT POWER Fgsdpfxoz Ahdae Agxoi Single-phase power: 3 kVA / 230 V / 13 A Single-phase power: 2 kVA / 110 V / 18.2A GENERAL DATA Fuel tank capacity: 5.1 l Running time (welding at 60% duty cycle): 3.5 h Sound power level LWA (sound pressure level LpA): 99 dB(A) (74 dB(A) at 7 m) Weight (dry): 61 kg Dimensions (L x W x H): 630 x 490 x 540 mm

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Fedpez H Iwlefx Agxegi Independent electrical panel Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Condition: used, Year of construction: 1973, turning diameter over bed 2997 mm turning diameter over slide rest 2235 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm Fgodpfxst Ei Hue Agxji required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: like new (used), We are selling the following pressure reducer: Art. No.: RS3602021018 Fedpfjx Ekruox Agxegi 5 units available in new condition. Price for the complete set: €20 net. Operating instructions included. Shipping possible. No returns or warranty.

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. Fgedpfxow Nxkfj Agxsi 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm *

Condition: used, mileage: 164,000 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, parking heater, soot filter, Tigis with a new engine 7-speed automatic transmission 0 km on the engine Navigation system (Comand) / Rearview camera / Wheelchair lift attachment / Absolutely like new condition!!! The vehicle will be available in April. Fodokktwvopfx Agxogi Almost no signs of wear and tear // like new. The vehicle had minor damage to the front, which was repaired according to the manufacturer's specifications (we are a Mercedes Benz VAN partner). Only the hood, bumper, brackets, and one headlight and radiator have been replaced. A Mercedes Benz or DEKRA inspection report can be provided upon request. The vehicle is sold with a 12-month warranty. The car is like new!!!!! If you have any questions: Our service – for you! * DEKRA or TÜV seal available upon request * FINANCIAL SERVICES – Financing, leasing, or hire purchase can be tailored to your individual needs * WARRANTY – up to 36 months available for an extra charge * Replacement vehicles in stock * RECONDITIONING – All vehicles are professionally prepared by our team before and after sale * You can find more vehicle offers and service options at: We look forward to your call / The G&G team is always available to assist you. We speak Italian, English, Polish, and Spanish and can certainly help you if you are looking for a good used ambulance. This advertisement is only a preview of our vehicle and is not part of a purchase contract. Information provided on the internet is a non-binding description and does not constitute guaranteed features. The seller is not liable for errors, input errors, and data transmission errors. Changes and prior sale are reserved!

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Fodpfx Agotwqzloxjgi

Condition: excellent (used), Year of construction: 2006, Viessmann Vitorond 200 Output: 160 kW Fgjdpemnqc Hefx Agxoi Burner: Weishaupt oil or gas burner available upon request Viewing by prior telephone arrangement only! Preferred sale to dealers, tradespeople, or for export. All information is provided without guarantee; errors and prior sale excepted. The seller accepts no liability for typing or data transmission errors. We will, of course, handle all formalities Loading possible

Condition: new, Year of construction: 2026, PROD. MARK TYPE MSM3 D 200 S/N ITJ1061384 YEAR 2026 POWER (kW) 3 OUTPUT (m3/min) 0.33 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 INVERTER NO BUILT-IN DRYER YES, R513a, 0.17 kg EXCHANGER NO COOLED BY (AIR/WATER) Air WITH TANK YES, 200 L DOCUMENTS YES Fgodpfx Aez I Riyjgxei New/Used NEW

Condition: new, Graco 245639 D20 lower pump, serial number as shown in the photo, unused, in opened original packaging, 100% functional. Fjdpfsi Eachox Agxegi

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Fodpfxek Eakve Agxegi -230 V -0,7 A -50 Hz -IP 65

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro Fedpfx Agjd Erdroxegi # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: excellent (used), DMC Topsand 2000 Calibrating and Sanding Machine 4 Belts First group: 1 roller Second group: 1 roller Third group: 1 electronically controlled sectional pad Fourth group: 1 electronically controlled sectional pad for superfine finishing Usable width: 1350 Vacuum system on the belt Fodpfx Agei Dakrjxsgi

Condition: used, operating hours: 9,585 h, lifting height: 3,350 mm, fuel type: diesel, mast type: duplex, fork length: 1,100 mm, fork width: 1,030 mm, total height: 2,170 mm, total length: 2,540 mm, total width: 1,160 mm, color: orange, Empty weight: 3.500 kg Lifting capacity: 2.000 kg - Documentation available: Yes - Operating hours: 9585 - Lifting capacity: 2000kg - Lifting height: 3350mm - Overhead clearance: 2160mm - Free lift: 0mm - Fork length: 1100mm - Maximum fork width: 1030mm - Minimum fork width: 220mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Mast: Duplex Fgedpfx Aoy Tt Tqogxsi - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 2540mm x 1160mm x 2170mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Manuel Yousif

Condition: new, Year of construction: 2023, warranty duration: 12 months, Daub bread slicing machine - Model D 208 - Year of manufacture: 2023 - Slice thickness: 11 mm Fgsdpfx Aezf E Risgxsi - Unused - 12-month warranty - Bag inflation device included - Collection from warehouse / shipping option available - Price on request

Condition: new, functionality: fully functional, machine/vehicle number: 81BE09383, Year of construction: 2025, operating hours: 75 h, load capacity: 2,000 kg, lifting height: 4,560 mm, fuel type: electric, mast type: triplex, gearing type: converter, battery capacity: 230 Ah, battery voltage: 80 V, fork length: 1,200 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 3,790 kg, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, head guard, Manufacturer: Hangcha Model: Front-end Type: CPD - 20 - XEY2HA - SI Factory number: 81BE09383 Year of manufacture: 2025 Load capacity: 2000 kg Mast type: Triplex Lifting height: 4560 mm Mast height: 2200 mm Free lift: Yes Cabin type: Full cabin with heating Drive type: Electric Fode Aay Upopfx Agxegi Side shift: Yes Tire type: Solid Battery: Yes, Li-ION, 80V, 230AH Charger: Yes, Li-ION, 80V Horvat AGA d.o.o. has been successfully operating in the field of comprehensive solutions for internal transport and warehouse logistics for over two decades. We specialize in the supply of new and used lifting equipment and offer a wide range of reliable forklifts for various industrial needs. Our offer includes: • Sales: Top-quality new and used forklifts of proven quality. • Rental: Flexible short-term and long-term rental options to optimize your operational processes. • Service and maintenance: Professional technical services and rapid response from our team of experienced service technicians. You can view our complete offer and technical details on our website. For expert advice and preparation of an informative offer, please contact us.

Condition: good (used), functionality: fully functional, machine/vehicle number: 191460, rotational speed (min.): 3,000 rpm, grinding wheel diameter: 200 mm, Original GREIF double grinding wheel stand including base including CEE plug Power: 0.55 kW Fodpfx Aozzdwtogxogi