Used Cyclone for sale (264)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Schwanberg
1,820 km
Rotary screw compressor with refrigerant
AGRE ALUPSCK 10-10 270 Plus
Call
Condition: new, AGRE ALUP SCK 10-10 270+
Belt driven. Space saving. Inexpensive.
Easy operation. Perfect solution for industrial and craft businesses.
Convincing compressed air quality.
Built-in refrigerant dryer.
Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control.
Equipment in detail:
Compression concept: oil-lubricated screw compressor
Cooling: air cooled
Iaedpfsixt H Nox Ag Uol
Drive: Efficient IE3 motor, belt drive
Control: fixed speed
Control: Aircontrol 5.0
Refrigerant dryer: attached, refrigerant R513A
Filtration: incl. cyclone separator
Tank: horizontal, painted, manufactured according to AD2000
Performance data:
Volume flow at operating pressure 9.5 bar = 1.06 m³/min
operating pressure min. / max. 5,5 / 10,0 bar
Total power consumption at 9.5 bar / full load 10.2 kW
Rated power motor; IP55 7.5 kW
Oil quantity 4 lt
Dimensions and weight:
L x W x H = 1530 x 662 x 1531mm
weight: 310 kg
Compressed air outlet: G 1/2''
Compressed air tank capacity: 270 lt
Listing
Concordia Sagittaria
1,733 km
Sandblaster
FERVI0605
Call
Condition: new, Pressure sandblaster with 2 suction FERVI
The FERVI 0605 Pressure Sandblasting Machine with 2 vacuum cleaners is equipped with a pressure tank to have a greater abrasive effect, double cyclone vacuum cleaner, paper filter, front opening, and ceiling light with 3 fluorescent lamps.
Useful internal dimensions 1180 x 850 x 890 h mm
Maximum capacity 150 kg
Working pressure 6 ÷ 8 Bar
Ijdei A Iuuspfx Ag Ujal
Air consumption 31 SCFM 880 l / min
Gun nozzles ø 6 - 7 mm
Electric aspirator 2 x 230 V 50 Hz 1.2 kW
Filter capacity 5 microns
Equipped with lighting Yes
Overall dimensions 1800 x 1515 x 2070 h mm
Net weight 245 kg
Packaging dimensions 1340 x 970 x 1090 h mm
Listing
Siedlce
2,045 km
350L Sandblaster - TOP open
CORMAKKDP350 TOP
Call
Condition: new, Year of construction: 2025, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor.
Machine description
Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials.
KDP350TOP technical parameters
WORKING CAPACITY 330L (0.33m3)
OPERATING PRESSURE 4 - 8 bar
AIR CONSUMPTION 400 - 700 l/min
AIR CONNECTION 1/4" (INCH) QUICK RELEASE
VIEW AREA 580x270mm
DRAIN CONNECTION fi 63mm and 90mm
CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm
DIMENSIONS 960x720x1500mm
WEIGHT 64 kg
Standard equipment
DC15 cyclone exhaust
Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch
2 high-quality work gloves made of rubber, integrated with the device
2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device
Iaodpfom Ncb Eox Ag Uel
Sand blasting gun with eight replaceable ceramic nozzles
4 pieces of replaceable protective film for the window, viewfinder
front door with rubber perimeter seals for dust-free operation
Manual in Polish
We kindly inform you that the device requires self-assembly.
We kindly inform you that the device requires self-assembly.
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing
Tumba
1,719 km
Separator
Alfa LavalBRPX714HGV-34C-50
Call
Condition: reconditioned (used), Fully refurbished and tested. Very good condition.
Complete with
tools for bowl
cyclone
foundation plate
vibration damping feet
owm - operating water module
controlcabinette (not tested or reconditioned)
Iodpfx Ajuccrkjg Usal
Listing
Luckenwalde
1,444 km
Bar Transfer Powder Coating System
Proton
Call
Condition: used, Year of construction: 2014, ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support!
✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️
✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨
Benefit from Proton's 40 years of experience in surface coating technologies.
➖➖➖➖➖
✅Content of the facility
►1 piece - Gas-heated large powder furnace
►1 piece - Automatic powder coating booth
►1 Piece - Electrically Heated Small Powder Furnace
►1 piece - Manual monocyclone powder coating booth
►1 piece - room type monocyclone manual powder coating booth
►1 piece - Automatic chemical pre-treatment and drying system
►6 pieces - Automatic powder coating gun
►3 Pcs - Manual Powder Coating Gun
►1 piece - Automatic powder recovery unit
►5 pieces - monocyclone
►1 piece - Automatic control panel
►1 Piece - Automatic Rod Movement System Speed Controlled
►2 Pieces - Movable Platform Speed Controlled
►12 pieces - parking station
►300 m - conveyor rail
►12 pieces - hanging rods
Our facility is located at Anhaltstrasse 30, 14943 Luckenwalde. You can make an appointment to view the machines.
The system has been in use for 8 years.
Iasdpfxoiivq Us Ag Uel
Since we are the direct manufacturer of the plant, we can make the changes you want to the machines by mutual agreement.
It does not fit into your existing assembly space? Then we can make changes to the layout.
Please check the system PDF file using the link below.
Discover more used machines
Listing
Solms
1,183 km
Wheel loader
MECALACAhlmann AX700 Hitachi ZW75 65 Std.
Call
Condition: used, Year of construction: 2024, operating hours: 61 h, Equipment: all wheel drive, Mecalac Ahlmann AX700 bucket, pallet fork, 61 operating hours, demonstration model, like new, TOP condition
Year of manufacture: 2024
- Type: AX 700
- Operating hours: 61 hours
- With bucket and pallet fork
- 4100 mm high loader
- Operating weight: 4,710 kg
- Monoboom with Z-bar bucket assembly including precise parallel guidance and bucket position indicator
- Mecalac Cat II-Z electro-hydraulic quick coupler
- Water-cooled Deutz TD 2.9 L4 turbo diesel engine
- Diesel Oxidation Catalyst (DOC) 50 kW / 68 hp - 2300 rpm
- Temperature-dependent fan control
- Central self-stabilizing articulated joint
- Tires 12.5-18 (profile: AT 603)
- Travel speed 20 km/h km/h
- Sound insulation
- Cyclone air filter - 2-stage
- 12V electrical system
- Battery master switch
Iasdpfxoxzurzo Ag Uel
- Automotive hydrostatic drive
- Planetary axles with disc brakes acting on all four wheels
- All-wheel drive
- 100% engageable differential lock on both axles
- Single-circuit hydraulic system with a 62 l/min constant-displacement pump
at 250 bar with priority valve for the steering supply
- 1st control circuit: lift/lower and float position
- 2nd control circuit: tilt/untilt
- 1st additional control circuit for quick coupler
- Test connection for hydraulic system
Performance data
Bucket position:
- Tilt angle 47º
- Max. dump angle at top: 45º
Lifting force at ground level: 3500 daN
Tear-out force: 3500 daN
Thrust force: 3800 daN
Tipping load:
- Standard bucket, frontal: 3250 kg
- Standard bucket, articulated: 2900 kg
Equipment payload (level terrain):
- On forks, frontal: 2100 kg
- On forks, articulated: 1900 kg
- Smooth joystick operation with integrated direction and speed control and differential lock actuation
- ROPS comfort cab with removable upper section
- Tinted windows including skylight
- Parallel-guided windshield wiper
- Rear window wiper
- Windshield washer system, front and rear
- Rear window heater
- 2 large exterior mirrors
- Central multifunction display with display and integrated on-board computer for machine monitoring
- Tilt adjustment of the steering column
- Multi-adjustable driver's seat
- Safety belt
- Coat hook
- Storage compartments
- 12V socket
- 2 front headlights
- 2 roof-mounted work lights
- Tow bar
Machine dimensions
Height: 2470 mm
Width: 1600 mm
Despite the utmost care, errors in this listing cannot be ruled out. We reserve the right to make errors and to sell the machine prior to purchase.
Listing
Ottobrunn
1,516 km
Rösler S1 blast machine with rotary basket
Rösler S1 Strahlanlage Drehkorb
Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 85 h, Rösler S1 – Smarter All-rounder for 3D Printing or Conventional Blasting
Rotary Drum Diameter: Ø 400 - 650 mm
Year of Manufacture: 2020
Number of Blast Nozzles: 2 pcs
Number of Blow-off Nozzles: 2 pcs
Filter with cyclone and screening deck
automatic and manual blasting
Dimensions: 200x130x200 cm (LxWxH)
The Rösler S1 from the S-Line series is a compact all-round talent for demanding surface finishing applications. Originally developed for post-processing powder bed-based 3D printing technologies, it automatically cleans, smooths, and homogenizes components – quickly, reproducibly, and economically. At the same time, depending on the component and blasting media, the S1 is also ideal for traditional blasting operations such as cleaning, descaling, deburring, or achieving decorative surface finishes.
A special highlight is the integrated blast media conditioning system:
A cyclone separator and a vibrating mesh screen reliably separate waste, dust, and worn blasting media. Only clean, high-performance blasting media remains in the circuit, ensuring consistent blasting results and protecting sensitive components.
The integrated PLC control allows all relevant process parameters to be stored in programs—such as blasting duration, blasting pressure, or drum rotation speed. These programs can be retrieved and adjusted at any time, enabling reproducible blasting processes, quick product change-over with minimal setup time, and simple, safe operation even with frequently changing components.
Quick media change in combination with the cyclone and vibrating mesh screen makes the S1 a true all-rounder: The system can be adapted in no time to different materials, component geometries, and blasting tasks—from additively manufactured plastic and metal parts to conventional serial components.
Your benefits at a glance:
- All-round blasting system for diverse applications
- PLC-controlled processes with storable programs for reproducible results and quick product change-over
- Integrated cyclone and vibrating mesh screen for clean blasting media and consistent blast quality
- Fast media change for maximum flexibility in daily operations
Iaodex H N Anspfx Ag Ujl
- Compact, robust plug-and-play design for easy integration into existing production lines
Listing
Eastleigh
542 km
Hot wash Granulation / cleaning complete
European600-HW
Call
Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower.
Iaedjxcnxdjpfx Ag Ujl
The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials.
Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed.
The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel.
Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.
Listing
Siedlce
2,045 km
1000L Sandblaster - TOP open
CORMAKKDP1000 +DC15
Call
Condition: new, functionality: fully functional, Year of construction: 2025, KDP1000 Cabinet Sandblaster – Industrial Sandblasting Cabinet for Wheels, Structures, and Metal Components
The KDP1000 cabinet sandblaster is an advanced machine designed for intensive industrial use in automotive, shipbuilding, aerospace, and commercial service environments. Its impressive 1000-liter tank capacity and spacious 850-liter working area allow processing of large components—from wheels and rims to housings and heavy structural parts. High build quality and reliability make the KDP1000 a professional metal sandblasting solution for the most demanding users.
Key Advantages of the Machine
Large 1000-liter working capacity – ideal for processing oversized components.
Dust-free operation thanks to tight perimeter seals – protects both the environment and the operator.
Closed-loop system – minimizes dust emissions in the workplace.
Efficient DC15 cyclone dust extractor included – ensures effective removal of abrasive particles.
Supports various abrasives: corundum, glass beads, quartz sand, emery.
Easy abrasive replacement – thanks to a built-in drain at the bottom of the tank.
Iaedpfxox Dkx Nj Ag Uel
Complete equipment package: gloves, handheld gun, fixed gun, and air-blow gun.
Construction and Technology
The KDP1000 sandblasting cabinet is engineered for heavy-duty operation. Its robust powder-coated steel construction ensures resistance to abrasion and environmental factors. The enclosure is easy to maintain, and the sealed working system significantly reduces dust emissions, increasing operational safety. The hose-based blasting system located at the bottom of the tank ensures stable abrasive flow. The large working area and convenient access to the cabin enable efficient handling of workpieces and optimal use of the workspace.
Precision and Work Efficiency
A working pressure range of 4–8 BAR allows adjustment of blasting intensity according to the surface type and condition. Powered by 230V and equipped with a reliable pneumatic system, the KDP1000 cabinet sandblaster ensures consistent, repeatable results. Built-in lighting and a wide viewing window provide excellent visibility and control over the cleaning process, even in hard-to-reach areas of the workpiece.
Applications
The KDP1000 model is widely used in various industrial and service sectors. It is ideal as:
Wheel sandblaster – restoration of steel and aluminum rims,
Surface preparation tool before powder coating, welding, galvanizing,
Metal sandblaster – removal of rust and coatings from steel profiles, fittings, and structural components,
Equipment for cleaning engine parts, housings, casings, suspension components, and mechanical details.
Standard Equipment
2 integrated rubber work gloves
Handheld sandblasting gun
Fixed internal blasting gun
Air blow-off gun
7 ceramic nozzles
DC15 cyclone dust extractor
Technical Specifications – KDP1000 Cabinet Sandblaster
Parameter Value
Working pressure 4–8 BAR
Capacity 1000 L
Abrasive media corundum, glass beads, sand
Working area 850 L
Power supply 230 V, 50 Hz
Weight 149 kg
Internal cabin dimensions (W × D × H min/max) 1120 × 900 × 420/820 mm
Overall dimensions 1270 × 1000 × 1800 mm
Listing
Częstochowa
1,886 km
TRIA 80/49 55kW rotor 800
TRIA80-49
Call
Condition: used, Year of construction: 2000, Granulator / Knife Mill
Manufacturer: Tria (Italy)
Iedpfx Aex Exukeg Ujal
Type: 80/45
Main motor: 55 kW
Rotor length: 800 mm
Rotor diameter: 490 mm
+ Blower
+ Big-bag station with cyclone
Listing
Luckenwalde
1,444 km
Powder coating systems
PROTONAutomatische Pulverbeschichtungsanlage
Call
Condition: new, Year of construction: 2025, ✅ Get to know our fully automated powder coating systems for maximum production capacity!
Professional powder coating is essential for making metal surfaces durable, corrosion-resistant, and visually appealing.
If you want to coat large quantities in your company and achieve maximum efficiency, our fully automated powder coating systems are exactly the right choice.
🔧 Proton Maschinenbau GmbH offers you intelligent, fully integrated system solutions for economical and consistently high-quality production.
_____
🔍 Impressive technology – Our system technology at a glance:
✅ Spray pretreatment line in tunnel design
✅ Drying ovens (available in U-, M-, or L-shape)
✅ Fully automatic powder coating booth
– PVC floor for easy cleaning and quick color changes
– Housing options made of stainless steel, powder-coated sheet steel, or PVC
– ATEX-certified lighting units
– Pneumatic floor cleaning system
✅ Automatic painting robots (1-, 2-, or 3-axis models available)
✅ Automatic powder coating guns
✅ Central powder coating station
✅ Monocyclone jet pulse filter unit (adapted to booth size)
✅ Curing ovens (U-, M-, or L-shape available)
✅ Conveyor systems (single-line or Power & Free system)
✅ Central control panel with touchscreen (from 7" display size)
_____
🎨 Housing colors to suit your taste – at no extra charge!
Our machines are available in two modern color options:
Yellow-white or anthracite-white – tailored to your corporate design or aesthetic preferences.
Our customers can choose between these two combinations at no extra cost.
_____
🎯 Why a powder coating system from Proton?
✔️ Modular and scalable as needed
✔️ Layout planning tailored to your location
Iaodpfxjwbh Nps Ag Uel
✔️ Maximum automation through numerous options
✔️ Compliance with European standards (CE, ATEX)
✔️ Energy-efficient and low-maintenance
_____
💡 Configure your system now!
Use our powder coating configurator on our website to put together your customized system.
Once the configuration is complete, our engineering team will create a customized concept for your requirements.
_____
Proton Maschinenbau GmbH – Powerful technology. High performance. Worldwide trust.
Listing
Neckartailfingen
1,333 km
Straw; Cutters
muetekMHB; MHZ
Call
Condition: new, Year of construction: 2024, Consisting of large bale breaker Type MHB and straw shredder Type MHZ
1) Bale Breaker MHB:
Special price from €22,975 net (lead time approx. 15 weeks)
Suitable for round or square bales.
Includes frequency converter (FU) – regulates the speed of the chain conveyor.
The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here.
Technical data – Bale Breaker:
Performance: 1–2 bales per hour
Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw.
Max. square bale size: 2400 x 1200 x 800 mm (L x W x H)
Milling motor: 5.5 kW, 380 Volt
Chain conveyor feed: 0.75 kW, 380 Volt
Dimensions: 3750 x 1730 x 2460 mm (L x W x H)
Weight: 400 kg
2) Straw Shredder MHZ 600 – 11/15 kW; available immediately
Special price from €6,995 net
Surcharge for even larger straw shredder (18.5 kW): + €3,940 net
Technical data, MHZ with special hopper:
Motor: 15 kW, 380 Volt electric motor
Diameter: 600 mm
Hardened cutting knives
Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm)
With star-delta switch, phase protection, and 8 m power cable, plug-in ready
Discharge nozzle: 160 mm
Blowing distance approx. 12 m
Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H)
Weight: approx. 240 kg
---
Optional extras for a surcharge:
Feed auger: + €970 net
Cyclone (suspension by customer on site; should be no more than 10 m away):
+ €2,970 net
Simple filter: €1,750 net
---
Further options:
Industrial extraction system (demonstrator):
+ from €9,950 net
Optional rotary valve (renders material pressureless):
+ €5,750 net
Control panel: from €1,620 net
Special breaker extension 3 m (other sizes on request):
+ €9,750 net
Briquetting press MPP 180 S; little used demonstrator
70 mm briquette – up to max. 100 kg/h
Isdpfob Nulhsx Ag Ueal
from €39,700 net
* Larger machines available on request
---
Description:
muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality.
muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type.
The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged.
---
The machines are generally suitable for dry input material:
- Straw
- Hay
---
Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration).
Straw mill is not suitable for hemp processing.
Requirements for input material:
Max. moisture content 12%
Listing
Dány
2,060 km
Thresher, spelt wheat, sunflower
Lajucso-Print Kft.LAH NAGY 3
Call
Condition: new, Large dehuller with gravity table Ø1500
Iedsxvw U Uspfx Ag Uoal
Machine task:
Removal of seed hulls
Dehullable materials:
Spelt, emmer, sunflower, einkorn.
Main parts of the machine:
- Frame
- Safety switch
- 380V motor
- Dehulling head
- Hopper
- Screw feeder
- Extraction (suction)
- Regulator
- 4 frequency converters (speed controllers)
- Gravity table
- Blower
- Cyclone
- Pipes
The machine is made of painted steel construction.
Model:
Large dehuller with gravity table 3
Dimensions:
2500*2000*2200 mm
Weight:
~655 kg
Machine performance:
300-700kg/h
Efficiency: 98.8-100%
At a capacity of 300-500 kg/h, the machine provides 100% clean kernels.
Motor drive:
Total: 15 kW
Listing
Szymiszów
1,832 km
Boiler 5 MW, rated at 3.5 MW
Biomassekessel Urbas5 MW
Call
Condition: excellent (used), Year of construction: 2002, We offer a biomass boiler from the renowned company Urbas – a top-of-the-line product for burning moist biomass.
Manufacturer: URBAS Austria
Type: UR-FRR
Output: 5 MW, Type-certified from 3.5 MW
Year of manufacture: 2002
Water temperature: 110 °C
Operating pressure: 6 bar
Boiler type-certified due to legal requirements and the absence of an electrostatic precipitator.
Electrostatic precipitator reduced from 3.5 MW
Fuel: Wood chips, bark, sawdust, Granulation: G 100, Maximum humidity: 60%
The offer includes:
Electrical barrier set, complete labeled wiring
Pumps and valves set, sensors and probes, thermometers, piping, a multicyclone (smoke pre-filter), hydraulic ash removal from the boiler, hydraulically driven grates, and a hydraulic airlock under the firebox.
The hydraulic fuel supply with hydraulic pump, approximately 6 meters long, is equipped with an automatic fire extinguishing system in case of flame flashback.
Lambda probe in the flue pipe.
Approximately 12 m horizontal flue pipe.
Iajdexwnxyepfx Ag Usl
Set of recirculation fans, a flue gas fan controlled by a furnace vacuum sensor and temperature. Circulation pump, three-way valve, and shut-off valves. Complete documentation of the electrical installation and program description.
Optional at extra cost:
1. Push-through floor from the fuel storage area, 2 racks, floor dimensions 3.8 m x 10 m, including hydraulic pump and complete hydraulic hose set.
2. Insulated, double-walled stainless steel chimney, 500 mm inner diameter, approximately 15 m high.
3. Complete dismantling
Including opening and closing the roof, crane operation, loading, and photographic documentation of the dismantling.
Price to be discussed. Or joint dismantling with ATS Maszyny and the buyer's fitters. Price to be discussed
Dismantling date: from April 6, 2026
Listing
Siedlce
2,045 km
350L Sandblaster - side open
CORMAKKDP350
Call
Condition: new, Year of construction: 2025, KDP350 Cabinet Sandblaster is an efficient surface treatment and cleaning machine for metal components, designed for professional workshops, industrial facilities, and refurbishment services. The 330-liter working chamber and two side doors with full-seal gaskets ensure convenient access and dust-free operation. The set includes a DC15 cyclone dust extractor, which effectively removes dust generated during operation. This unit is ideal for sandblasting wheels and other metal parts requiring precise cleaning.
Key Features of the KDP350 Sandblaster
Large working chamber – 330 liters capacity allows processing of larger components.
Two side doors – on the right and left sides for easy loading and part handling.
Iodpfx Agjw H N R So Usal
Dust-free operation – thanks to sealing gaskets and extraction ports (63 mm and 90 mm).
Gun with ceramic nozzles – includes 4 interchangeable tips (4, 5, 6, 7 mm) for precise blasting.
Illuminated work area – improves visibility and accuracy during operation.
Integrated gloves – abrasion-resistant and protect the operator’s hands.
Compatible with various abrasives – such as quartz sand, glass beads, silicon carbide, emery, and plastic granules.
Standard Equipment
DC15 cyclone dust extractor with filter and hose
12V fluorescent lamp (powered by 230V, with switch)
2 integrated rubber gloves
Blasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm)
4 protective films for the viewing window
2 dust extraction ports: 63 mm and 90 mm diameter
2 side doors with full-circuit sealing
User manual in Polish
Technical Specifications of the KDP350 Sandblaster
Specification Value
Working capacity 330 L (0.33 m³)
Operating pressure 4 - 8 bar
Air consumption 400 - 700 l/min
Air inlet 1/4" quick coupling
Viewing window area 580 x 270 mm
Doors 2 pcs (left and right sides)
Dust extraction ports Ø63 mm and Ø90 mm
Internal dimensions 890 x 655 x 360/610 mm
External dimensions 960 x 720 x 1500 mm
Weight 88 kg
Note: The machine is delivered in parts and requires self-assembly according to the included manual.
Listing
Częstochowa
1,886 km
TRIA 80/49 55kW rotor 800
TRIA80-49
Call
Condition: used, Year of construction: 2000, Granulator / Knife Mill
Manufacturer: Tria (Italy)
Type: 80/45
Main motor: 55 kW
Rotor length: 800 mm
Rotor diameter: 490 mm
Iaodpox Ext Tofx Ag Ujl
+ Blower
+ Big-bag station with cyclone
Listing
Luckenwalde
1,444 km
Powder plant
PROTONTWINLINE-MA
Call
Condition: new, ⭐⭐⭐⭐⭐ (5.0)
⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support!
✈️ Plus shipping costs – Shipping available upon request.✈️
Fast delivery: Only 4-6 weeks after receipt of payment!
Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website.
✅✅✅Energy Class A+++✅✅✅
➖➖➖➖➖
✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.
➖➖➖➖➖
✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨
Benefit from Proton's 40 years of experience in surface coating technologies.
➖➖➖➖➖
☘️Environmentally friendly☘️⚡️Green energy⚡️☘️
✅Twinline-MA Automatic Powder Coating Booth - Perfect Coating, Fast Color Change✅
The Twinline-MA powder coating booth from Proton Maschinenbau was developed for automatic and manual application in an electrostatic field and impresses with its efficiency, user-friendliness, and outstanding coating results.
✅Innovative design for quick cleaning:
Thanks to the insulating PVC floor and the automatic floor cleaning system, dust accumulation is effectively prevented. The booth can be cleaned quickly and easily without entering – for maximum productivity with minimal effort.
✅Intelligent airflow for maximum efficiency:
Fulair technology ensures targeted air extraction at the inlets and outlets. This prevents powder loss into the environment and guarantees ideal conditions in both manual and automatic coating areas.
✅Effective powder recovery:
The monocyclone with a downstream filter system enables a high powder recovery rate. The filters are automatically cleaned using compressed air, significantly reducing maintenance requirements.
Iaedpfxsggyk Ej Ag Usl
✅Robust and flexible construction:
The booth construction is available in powder-coated steel, stainless steel, or entirely made of PVC. The solid construction with no moving parts ensures a long service life and low maintenance costs.
✅Fast integration, short installation time:
Twinline-MA can be easily integrated into existing systems and minimizes downtime. All system components are optimally arranged and offer the operator easy access at all times – whether during operation, color changes, or maintenance work.
With the Twinline-MA booth, you are investing in speed, quality, and reliability. Experience a modern powder coating system that sets standards!
Inquire now – Make your company fit for the future!
⭐Follow us for new campaigns⭐
☀️ 2-YEAR WARRANTY ☀️
☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️
Listing
Neckartailfingen
1,333 km
Ballenauflöser
mütek
Call
Year of construction: 2024, condition: new, Overview - of the different variants
*Not every position is required:
Optional:
-Bale shredder MHB from 24.990 € net
-MHZ straw mill from € 7,980 net
-Special hopper 970 € net
-Cyclone from € 3,750 net
-Sheet metal silo demonstrator with discharge (only sketched in the picture)
*optional, if you want to load with the wheel loader
Unit price net from € 14,750 - Demonstrator
-Dedusting auger - length approx. 4 m
4 sieves are mounted on the underside, which are extracted.
Unit price net from: 9.750 €
- Extraction parts / hoses flat rate 945 € net
- Complete control system
Net unit price: € 2,750
-Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning
Connection 160,
fan 2,2kw
air capacity 1850m³ /400 V
Automatic compressed air cleaning
Unit price net from: 6.950 €
-Baler B 400
Bales approx. 400x400x800 (height adjustable)
Up to 30 bales per hour with + - 20 kg
from 59.995 € net
*A reference system (baler) is located in zip code: 64579 Gernsheim
Technical data:
Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request)
Bale weight +/- 20 KG (depending on material)
Capacity: approx. 30 bales per hour
Storage container approx. 0.7m³ capacity
Filling level sensors for min./max. filling level in the container
Hydraulic pre-compressor
Hydraulic compression ram
Hydraulic unit, valve block with oil tank
Pump 18.5 KW / 50 liters
Rollers in the bale chamber for easy bale push-off
Dimensions (l x w x h) 3105x2830x2455 mm
Weight approx. 1500 KG
mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of
materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw.
straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation.
quality in continuous operation.
The baler compacts the material filled into the storage container without the addition of binding agents
and packs the material into plastic bags. The volume of the material can be
considerably with the baling press. The volume reduction rate depends on the material. The
maximum material moisture content must not exceed 18 % Atro.
The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³.
volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system
as a complete disposal unit are also available. In addition to automatic filling via
deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic
automatic dedusting is possible.
mütek baling presses are equipped with a control cabinet for the control system.
In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800
Ijdoff Sbiopfx Ag Ujal
mm. However, the height can be adapted to your requirements on request.
The following advantages arise in the production of bales:
- simple and safe storage
- No loose dust
- Minimization of the storage volume
- Low transport volume
*Requirements for source material:
- dry (max. 30 % ATRO)
- Maximum length 35 mm
Listing
Strenči
2,164 km
Pellet production line
Call
Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour
is for sale. The factory is little used – only 16,000 tons were produced, it is in very good
technical and visual condition.
Ideal for professional production of pellets from wood biomass, agrobiomass or other raw
materials.
No additional premises are required for the installation of the plant, the pellet press is already
built into the container.
The line includes:
Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency
and long-term stability.
Transport and dosing equipment: Rematec – robust and accurate material supply at all
stages.
Tent shelter.
Additional equipment: cyclones, sieves, cooler, control panel, etc.
All DWG files, drawings for the foundations of the equipment are available.
Main advantages:
Large production capacity – up to 3 t/h.
Iaodpfx Agsx S Egmo Uel
High quality components from European manufacturers.
Ability to adapt to usage of different raw materials.
Line in working order – can be demonstrated in operation.
Available immediately.
Listing
Siedlce
2,045 km
350L Sandblaster - TOP open for profiles
CORMAKKDP350 TOP PLUS
Call
Condition: new, Year of construction: 2025, The sandblasting cabin is a device used in industry, car workshops and renovation works. It is used to remove surface layers from various materials, such as metal, wood or glass. The cabin has side openings and telescopic cylinders, which allows the processing of long workpieces. The standard equipment includes a dust extraction system, a set of nozzles, a gun and protective stickers for the visor. Thanks to it, you can effectively and precisely remove surface layers from various materials.
Product characteristics:
The 350 liter top opening sandblaster for KDP350TOPPLUS profiles is a specialized, reliable and professional tool that will ensure precise and effective cleaning and treatment of metal surfaces. Its advanced solutions and high quality make it one of the best products on the market, which will surely satisfy demanding customers and ensure failure-free and safe operation. The sandblaster is a device that has been specially designed to remove surface layers from various materials. Thanks to the side openings, it allows the processing of long workpieces, which allows for even greater versatility and flexibility in use. Telescopic cylinders are installed in the cabin door, which makes it easier to open and close, and thus increases the comfort of use. As standard, the cabin is equipped with a dust extraction system that protects against inhalation of harmful dust during operation. Thanks to this tool, work is safer and more comfortable.
KDP350TOP PLUS technical parameters:
WORKING CAPACITY 330L (0.33m3)
OPERATING PRESSURE 4 - 8 bar
AIR CONSUMPTION 400 - 700 l/min
AIR CONNECTION 1/4" (INCH) QUICK RELEASE
VIEW AREA 580x270mm
SIDE OPENING DIMENSIONS 200 x 180mm
DRAIN CONNECTION fi 63mm and 90mm
CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 890 x 655 x 360/610 mm
DIMENSIONS 960x720x1500mm
WEIGHT 64 kg
Standard equipment
DC15 cyclone exhaust
Foot pedal to control airflow
Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch
2 high-quality work gloves made of rubber, integrated with the device
2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device
Sand blasting gun with eight replaceable ceramic nozzles
4 pieces of replaceable protective film for the window, viewfinder
front door with rubber perimeter seals for dust-free operation
Manual in English
We kindly inform you that the device requires self-assembly.
We kindly inform you that the device requires self-assembly.
Iedpfx Agom Nccio Ujal
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing
Częstochowa
1,886 km
TRIA 80/49 55 kW, ROTOR 800
TRIA80-49
Call
Year of construction: 2000, condition: used, Granulator / Knife Mill
Manufacturer: Tria (Italy)
Type: 80/45
Main motor: 55 kW
Rotor length: 800 mm
Rotor diameter: 490 mm
Iaodpjx Extmsfx Ag Usl
+ Blower
+ Big-bag station with cyclone
Trust Seal
Dealers certified through Machineseeker

Listing
Luckenwalde
1,444 km
JET-PULSE extraction systems
PROTONMA-JP12
Call
Condition: new, filter area: 11 m², energy consumption: 18 kWh, sheet thickness steel (max.): 2 mm, ⭐⭐⭐⭐⭐ (5.0)
⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support!
✈️ 5-Week Delivery ✈️ Shipping available upon request.
✅✅✅Energy Class A+++✅✅✅
A frequency converter for speed control is integrated.
Iodsggyhijpfx Ag Ujal
MA-JP12 - 18 KW/H
LIST PRICE €22,500
Offer Price ►► €15,172 * Gross price.
Your net price for commercial users: €12,750.00
MA-JP12 - V2 - 30 KW/H
LIST PRICE €25,500
Offer price ►► €17,500 * Gross price.
Your net price for commercial users: €15,750.00
MA-JP16 - 30 KW/H -
LIST PRICE €30,500
Offer price ►► €24,097 * Gross price.
Your net price for commercial users: €20,250.00
➖➖➖➖➖
►►Buy it now◄◄
✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️
➖➖➖➖➖
►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄
✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨
Benefit from Proton's 40 years of experience in surface coating technologies.
➖➖➖➖➖
✅ Versatile:
PROTON dust filter systems were developed for a wide range of applications and are used in numerous industries. Especially in enclosed spaces and dusty work environments, they ensure a clean atmosphere and improved visibility of the workpiece surfaces – a crucial factor for the quality of the surface coating.
✅ Environmentally friendly & efficient:
The environmentally friendly filter systems reliably capture dust particles and return purified air to the environment. Our Jet Pulse filters are among the most widely used systems for extracting dry particles and for process air filtration.
✅ Maximum efficiency with low maintenance:
The Jet Pulse system is designed for maximum performance while minimizing maintenance times and operating costs. It is used in dust extraction systems, pneumatic conveying systems, and for removing hazardous substances from the air.
✅ Modularly expandable & recyclable:
For even higher separation efficiency, the Jet Pulse filter can be combined with bag filters or cartridge filters, as well as a monocyclone. In systems with recovery systems – e.g. For various applications, such as powder coating recycling, monocyclones or multicyclones can be used.
✅ Flexible design:
The systems consist of integrated modules and are adaptable in size, material design, and filter type. Depending on the type of dust and application, you can choose between cartridge or bag filters.
✅ Powerful & sustainable:
PROTON dust filter systems impress with their high filtration performance and contribute significantly to improving work quality and protecting the environment and employees.
⭐Note on prices:⭐
The prices listed do not include monocyclones and apply exclusively to the jet pulse filter unit. The control cabinet is also not included.
For prices of additional components such as the control cabinet or monocyclone, please contact our sales department.
⭐Follow us for new campaigns⭐
☀️ 2-YEAR WARRANTY ☀️
Listing
Siedlce
2,045 km
450L Sandblaster - TOP open
CORMAKKDP450 TOP
Call
Condition: new, Year of construction: 2025, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor.
Machine description
Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials.
KDP450TOP technical parameters
CAPACITY 450L (0.45m3)
AIR CONSUMPTION 400 - 1000 l/min
Iaodpfx Aem Nccxjg Uel
OPERATING PRESSURE 4 - 8 BAR
AIR CONNECTION 1/4" (INCH) QUICK RELEASE
VIEW AREA 580 x 270mm
DRAIN CONNECTION fi 64mm and 90mm
CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 1140 x 650 x 630mm
DIMENSIONS 1260 x 1000 x 1600mm
WEIGHT 105 kg
Standard equipment
DC15 cyclone exhaust
Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch
2 high-quality work gloves made of rubber, integrated with the device
2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device
Sand blasting gun with four replaceable ceramic nozzles
4 pieces of replaceable protective film for the window, viewfinder
front door with rubber perimeter seals for dust-free operation
Manual in English
We kindly inform you that the device requires self-assembly.
We kindly inform you that the device requires self-assembly.
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
Listing
Luckenwalde
1,444 km
Room Type Powdercoating Spraybooth
PROTONROOMLINE
Call
Condition: new, Product description:
ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts.
It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley.
Iaodeggyigopfx Ag Uel
The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open.
Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors.
Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project.
Attachable Dust Collection Systems:
- Jet-Pulse Filter System
- Mono Cyclone
- Multi Cyclone
Advantages:
- Easy to Use
- Quick Color Change
- Easy assembly and disassembly
- Cleaner environment
Listing
Siedlce
2,045 km
190L cabin sandblaster - KDP190 upper op
CORMAKKDP190
Call
Condition: new, Year of construction: 2025, The 190-liter capacity cabinet sandblaster is an effective tool for sandblasting and cleaning various surfaces. Its sturdy construction and modern technical solutions make it well-suited for applications in the industry, automotive workshops, or renovation projects. The main feature of this machine is its large front doors.
The 190-liter capacity cabinet sandblaster is equipped with a gun featuring a compressed air valve in the handle, allowing adjustment of the sand stream force for different types of surfaces. This is crucial for working on delicate or more demanding materials. The ergonomic cabinet with lighting ensures comfortable working conditions, enabling the operator to work safely, even during prolonged tasks.
Ideal for sandblasting:
Wheels,
Iedperh Ep Dsfx Ag Uoal
Clamps,
Yokes,
Engines,
Frames,
Housings,
Tanks,
Metal parts for cars and motorcycles,
Contaminants, rust, and paint coatings,
and many more...
The sturdy steel construction ensures durability and stability during intensive use, making the sandblaster resistant to environmental conditions. Simple operation and intuitive controls allow even less experienced operators to take full advantage of the 190-liter cabinet sandblaster.
With these features, the 190-liter cabinet sandblaster becomes an indispensable tool for those who require an effective and efficient solution for sandblasting and surface cleaning.
This model is also available with a hose and cyclone attachment.
Technical parameters:
Parametry techniczne KDP200C TOP
POWER 230V
WEIGHT 43kg
DIMENSIONS 1130x540x885
INTERNAL DIMENSIONS 800x500 mm
STAYING COLLAR DIAMETER ø 63 mm
We kindly inform you that the device requires self-assembly.
The price is a net price. Price does not include shipping costs.
For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.
We make it easier for you to find: "cyclone"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Cyclone (264)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

























































































































































































































































