Used Cyclone for sale (264)

Condition: ready for operation (used), Screw diameter: 250mm, length: 4170mm, with documentation, without accessories or spare parts, was used for sieving fish meal. Iodpfxjm Amicj Ag Ujht

Condition: ready for operation (used), Dust cyclone, dust separator, dust extractor, vacuum cleaner, Used machine Manufacturer: Piovan Type: — Overall dimensions: Width: 820 mm Depth: 600 mm Height: 2300 mm Isdpfjxh Ammjx Ag Ueht Vacuum pump data: Manufacturer: Siemens Type: ELMO-G 2BH1 Power: 4 kW Dust container size: Ø 470 x 340 mm

Condition: good (used), Milling mill for recycling plastics The machine is used to crush soft and hard plastics, such as: plastic bottles, plastic materials such as soles, belts, extrusions, materials with low metal content, such as electrical wires or electrical boards, waste paper, paper, cardboard and rubber materials. Ijdovzz H Nspfx Ag Ujht Manufacturer: PRTECHNIKA Type: MF-15 Year of production: 2012 Power: 15 kW, 400V Sieve mesh diameter: 6 mm + additional sieve with a mesh diameter of 10 mm Cutting system: 24 movable knives Cutting chamber: 470x350 mm Inlet chamber: 470x300 mm Weight: 1200 kg Includes a large cyclone and a fan without an engine Technical condition: used machine, functional, good condition, knives not damaged

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Ihodjihu T Tspfx Ag Uot

Condition: as good as new (ex-display), I will sell a mill with a rotor from Retsch Condition as new. The mill with a rotor TWISTER was designed specifically for preparing a food sample (e.g. feed) for NIR analysis. The optimal shape of the rotor and grinding chamber leads to the generation of an air stream that transports the ground material to the integrated cyclone with a sample bottle. The air stream protects the sample from heating, which means grinding without losing moisture. Supplied with the device, they guarantee optimal grinding, so there is no need to recalibrate the NIR spectrometer. It is possible to choose one of three rotor speeds to perfectly adapt the device to the application requirements. Cleaning the mill is quick and easy because the air flow leads to the complete removal of material from the grinding chamber. This is another RETSCH cyclone mill that guarantees the highest level of sample preparation and reproducible milling results for NIR analysis, making the analysis itself reliable and its results repeatable. APPLICATION EXAMPLES feed, corn, pasta, feed, pharmaceutical products, rice, soy, tobacco, cereals, ... PRODUCT ADVANTAGES ideal for grinding feed, cereals, grains and other similar products 3 adjustable speeds cyclone separator with 250 ml bottle for quick sample collection no sample contamination thanks to easy and quick cleaning convenient control panel 900 W long-life motor Applications grinding for NIR analysis Fields of application medicine / pharmacy, agriculture, food / feed Input material fibrous, soft Principle of operation pressure, friction Input size* < 10 mm Final fineness* < 250 µm input size / material quantity* < 250 ml Speed setting 10 rpm Rotor speed 52 / 62 / 72 m/s Rotor diameter 98.5 mm Sieve sizes 1 mm / 2 mm Drive linear motor Drive power 900 W Electrical data various supply voltages Mains connection 1-phase W x H x D in closed position 449 x 427 x 283 mm Net weight kg Iedpfsrvxqxox Ag Ujht Standards / Standards CE

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Ihsdpfxjxf Nw Hs Ag Ust Technical parameters: Electric motor power: 45Kw Capacity: 1500-2000kg/hour Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Located Locally in Hungary (EU)

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Isdpsnt Uc Rofx Ag Ueht Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: new, Year of construction: 2024, Wood crusher with cyclone filter, eletrical box, etc... Iedpfxoxf Nwyo Ag Ueht The machines has a CE certificate. Bjw7wnlw3f0 Quantity of cutting tip: 6 pieces Electric motor power: 30Kw Capacity: 800-1200Kg/hour Drive Type: V-Belt Feeder size: 150mmx150mm Located locally in (EU) Hungary

Condition: good (used), Dust cyclone Stainless, dust separator, used machine -inclusion dimensions: 1900x1600x6200mm - mantle size: diam. 1600x5200mm -stem dimensions: 630x310mm; diameter 280 - weight: 800 kg Ihsdpjttvrfjfx Ag Uot

Condition: ready for operation (used), Dust Cyclone, Dust Separator, Dust Extractor, Abrasive Overall dimensions: 1900 x 1500 x 2200 mm Inlet diameter ø: 200 mm Outlet diameter ø: 250 mm Ihodpfx Agovr U Etj Uot Cyclone diameter ø: 1230 mm Cyclone body height: 630 mm

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Ijdjdy E A Sjpfx Ag Ujht Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Year of construction: 2008, condition: like new (used), PERISSINOTTO 45Kw pump. Production 25 cubic meters / hour No.2 dryer screen vibrators are missing, we can supply them new, price separately. Ijdeu Avu Ujpfx Ag Ujht

Condition: used, Year of construction: 2008, Fabricant : WAM Isdox R D E Sspfx Ag Usht Model : WAMFLO FNXB 4 J21 Type: Round filters for potentially explosive atmospheres Year: 2008 Type: Dust collector ATEX: ExII3D135°C(T4) Suction ventilation: 4 KW Separation type: Filter bags Separation surface area: 21 m2 Cyclone diameter: Ø 1000 mm Cleaning solenoid valve: 6 units Documentation available: digital version   Filters not included with the machine. -> Supply of new consumables: this service may be subject to an additional quote.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits Ihjdpfx Aoyair Usg Uet • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Machine Depth 8150 mm

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Ihodpfxsyaadzo Ag Ust Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, This listing is for a Fisons Whirlimixer Cyclone Vortex Mixer For rapid and efficient mixing, the Whirlimixer® is far superior to hand shaking. The mixer creates a vortex in the tube which gives the highly effective mixing action. Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation, providing instant action the moment the tube is pressed into the rubber cup. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantage of controlled mixing over a wide speed range. This allows for very slow, gentle mixing which is necessary in many applications, articularly where damage to cell structure must be avoided. The unit may be set for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the mixer's casing. Accepts vessels up to 25mm diameter. Excellent stability is achieved through a combination of weight and non-slip feet. Electrical supply 230V, 50Hz Dimensions (w x d x h), mm 160 x 160 x 145 Ihedpfxsxzh Ddj Ag Uot

Condition: excellent (used), Year of construction: 2000, 2 static spreading plate separators for the extraction of filler sand Ihsdpfx Aoqi Hcgeg Ujt 1 x type: CC1180 ST and 1 x type: CC1180R Pick-up size: 4-5 mm End product: up to 150 µm Electric drive 7.5 and 11 kW in addition a cyclone - model: Hurriclone from PM-Technologies

Year of construction: 2003, condition: refurbished (used), functionality: fully functional, machine/vehicle number: BF 030003, This heavy duty 1200mm Granulator was refurbished fully in 2020 . Since then it has done only a very few tonnes of light weight containers after the refurbishment. New fixed and fly blades were fitted recently and it has not run since. 4 Rotating blades and 2 Stator blades. The semi solid rotor is water cooled if needed. Single step Belt drive from 110Kw Motor. Up to 1500 kgs per hour depending on the type of materials and feed rate. Air extractio to cyclone and bagging tower for big bags (FIBC) included. Loading conveyor with metal detection tunnel also included. Capable of grinding rubber also as fitted with the water cooled rotor. Two hoppers included , a standard one as shown in pictures and also included is a top entry completely enclosed hopper (not shown) suitable to received pre-shredded plastics or rubber. Ihsdpjv Su A Eefx Ag Uet

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Iedpfex R An Eox Ag Usht Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201812185055532, Haitian Model / Type: JU8500 II Injection unit: 10600 Year of manufacture: 2018 Serial no.: 201812185055532 Connected load: 157 kW Clamping unit Clamping force: 1850 ton Tie bar spacing (H x V): 1650 x 1550 mm Ijdpjx Stguofx Ag Ueht Min. mould height: 500 mm (750–150–100) Max. mould height: 1450 mm (1600–150) Centre ring adapter plate: 175 mm Core pulls: 4 Ejector Ejector force: 450 kN Injection unit Theoretical max. injection volume: 5227 cm³ Max. specific injection pressure: 2030 bar Screw diameter: 110 mm Screw type: Conventional, with mixing section Screw speed: 0–120 rpm Min. screw speed: 10.9 rpm Plasticising capacity (PS): 255 kg/h L/D ratio: 20 (reduced) Nozzle radius: R39 Hydraulic / oil Oil tank capacity: 1560 litres Nozzle / bedplate Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 94,000 kg Overall dimensions (L x W x H): 1450 x 965 x 360 cm Included Control system included Platforms and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 533 g 1D: 1066 g 2D: 2133 g Max. shot weight (3D): 3199 g Note Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Isdsvbdyxspfx Ag Uoht Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg

Condition: used, Technical documentation Description of the unit Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to simultaneously dry and mill wet solids, or cooling to reduce resulting material temperatures. Air and powder filtration / recycling system. – Product filtration and collection cyclone – Explosion proof valve Ihedpfjx R Amuex Ag Uet – Rotary air / product sealing valve – Product recovery hopper Additional information Regular maintenance and servicing. Full Documentation available. Incomplete electrical and safety control cabinets. These items can be quoted separately.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201712075033692, Haitian Model / Type: JU7500/2 Plus Year of manufacture: 2018 Serial no.: 201712075033692 Clamping unit Clamping force: 750 ton Opening stroke: 900 mm Iodpfx Agjx Stfwo Ujht Max. daylight: 2050 mm Tie bar spacing (H x V): 1110 x 960 mm Platen size: 1510 x 1440 mm Centre ring diameter: 200 mm Centre ring adapter plate: 175 mm Min. mould height: 450 mm Max. mould height: 1150 mm Open distance (open loopweg): 2050 mm Ejector Ejector stroke: 300 mm Ejector force: 195 kN Injection unit Theoretical max. injection volume: 2262 cm³ Max. shot weight in PS: 2058 g Max. specific injection pressure: 2200 bar Injection stroke: 450 mm Screw diameter: 80 mm Screw type: Conventional, with mixing section Screw speed: 0–145 rpm Min. screw speed: 15 rpm Plasticising capacity (PS): 255 kg/h Cylinder type: 5000 Hydraulic / electrical Hydraulic pressure: 210 bar Oil tank capacity: 1000 litres Power supply: 400 V Installed power: 86 kW Nozzle / bedplate Nozzle radius: R39 Nozzle through-hole in bedplate: 100 mm Nozzle bore: 6 mm Weight & dimensions Machine weight: 32 ton Overall dimensions (L x W x H): 970 x 510 x 270 cm Included Control system included Platform and stairs included Safety crash protection included Product weights (reference) Min. shot weight (1/2D): 205 g 1D: 410 g 2D: 820 g Max. shot weight (3D): 1230 g Note: Motan vacuum conveyor with cyclone separator not included; it must be dismantled and left on site.

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost. Ihsdsx R Al Djpfx Ag Uet

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 157403, clamping force: 12,000 kN, screw diameter: 135 mm, injection pressure: 6 bar, mold height (min.): 800 mm, Injection moulding machine Brand: ENGEL Model: Duo 16050/2300 Year: 2005 Serial no.: 157403 • Two-platen machine • Clamping force: 12,000 kN (2,300 tons) • Injection volume: 8,870 cm³ • Max. back pressure: 6 bar • Opening stroke: 3,000 mm • Mold installation height: min. 800 / max. 1,800 mm • Tie-bar spacing: 2,000 mm (horizontal) / 1,600 mm (vertical) • Platen size: 2,900 × 2,500 mm • Centre ring diameter: 380 / 250 / 175 mm • Centre ring adapter plate: 175 mm • Max. shot weight (PS): 7,983 g • Max. specific injection pressure: 1,980 bar • Screw diameter: 135 mm (conventional screw; optimised for PC) • Cylinder type: S13/M3 • Hydraulic pressure: adjustable up to 250 bar • Nozzle: radius R39; nozzle L380 – M98×6 • L/D ratio: 22 Iedpfx Aex R Shusg Uoht • Min. screw speed: 8.9 rpm • Power: 560 kW • Machine weight: 14,100 kg Shot weights (reference): • Min. shot weight (½D): 986 g • 1D: 1,971 g • 2D: 3,942 g • Max. shot weight (3D): 5,913 g   Included: • Control system • Roller feed system for mould placement • Platforms and stairs • Impact/collision protection system Overall footprint (installation): approx. 15 m (L) × 9 m (W) × 365 cm (H) Note: Motan vacuum conveyor with cyclone separator is not included and must be removed (disconnect at the fill plate) and left on site. Moulds stored in steel storage racks are not included. 2 × Tool-Temp temperature control units, type TT-138N (24 kW cooling capacity, up to 85 kW max.) not included.