Used Curing Chamber for sale (4,424)

Condition: used, El. heated chamber oven, make Heraeus Type: PL 320 Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm Iiedpexlq Tpjfx Aacsh

Year of construction: 2019, condition: good (used), Various climate chambers for testing a wide range of products. Iiodpjxgrz Rjfx Aacjh Example: Vötsch Type: VC 0018 Climate test chamber Air-cooled Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Iijdpfexdl Ixex Aacoh Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Year of construction: 1984, condition: ready for operation (used), Two industrial shaft furnaces Nabertherm for heat treatment are available. 1) Nabertherm S430, year of manufacture: 1984, power: 54kW, max. temperature: 1200°C, usable volume: approx. 430l. 2) Nabertherm S300/SO, year of manufacture: 1977, power: 36kW, usable volume: approx. 300l. An on-site inspection is possible. Iiodpfx Aaexn S Ugeceh

Condition: used, Heating Oven Climate Chamber KÖTTERMANN Type 2306 Serial No. 783018 Year of manufacture: approx. 1980 Internal dimensions (W x H x D): 500 x 530 x 620 mm Connected load: 4 kW Power supply: 380 Volt, 50 Hz, 18.2 Amp. - Recirculation fan - Analog temperature controller for heating - Analog temperature controller for cooling - Integrated refrigeration unit - Interior lined with stainless steel Iisdpoxf Uxpofx Aacjh No functionality test performed Control system outdated Net weight approx. 250 kg

Condition: excellent (used), 2-chamber aluminium silo standing on foot ring (plastic granulate silo) - second-hand - Iijdpfx Aaef D Hygjcoh Content approx. 70.000 Ltr. diameter approx. 3.000 mm cyl. height approx. 9.250 mm Total height approx. 14,850 mm Container with upper conical bottom and lower cone on top shelf per chamber: 1 dome DN 600 1 vent connection DN 100 1 flanged socket DN 80 the lower conical bottom ends in 2 square outlet nozzles approx. DN 250 otherwise according to photos The silo is equipped with brackets for a double ladder with back protection, which can be purchased as well, price on request.

Year of construction: 2018, condition: new, Double chamber furnace, make VEI-Engineering Iodpedyvipofx Aaceih type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Condition: like new (used), Chamber filter press from Netzsch. 20 plates 40x40 cm. Condition: excellent. Iijdsxn Azdspfx Aacoh

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm Iodpfx Aaexdi Ezocjih - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 1999, condition: not inspected (used), For sale is a built-in salt spray chamber/corrosion test chamber from Weiss Technik, type: SC/KWT 450 The system must be cleaned and serviced before use. The system can be inspected on site, shipping is possible. Manufacturer Weiss Technik B2misngk99 Type: SC/KWT 450 Test chamber capacity: 480 l Max. load: 100 kg Brine storage tank: 180 l Corrosion tests: Salt spray test: Room temp. up to +50 °C Babumc3umw Condensation water test: Room temp. up to +45 °C Voltage: AC 230V Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Isdpjxfzttsfx Aaceih Normal climate (ventilation): DIN 50014

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, in-stock item, available for immediate delivery Equipped with a safety system for solvent-based substances in accordance with DIN 1539. Matching loading carts available in stock (see photo). Contact us for details! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h Iedpfx Ajl Dw T Asacoih - Additional equipment: drive-in rails - Connected load: 39 kW - Net weight: 1,150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Viewing by appointment in our warehouse. We offer new and used industrial furnaces. Contact us! Furnace, ovens, drying oven, kiln, heating oven, warming cabinet, industrial furnace, annealing oven, preheating oven, tempering oven, drying cabinet, chamber kiln, curing oven, forced convection drying cabinet, forced convection oven, solvent oven, chamber dryer

Year of construction: 2011, operating hours: 3,210 h, condition: excellent (used), Climate test chamber, climate chamber, temperature test chamber WKL 34/40 by Weiss Umwelttechnik Test chamber volume approx. 34 liters Internal dimensions approx. 340 x 310 x 280 mm 1 shelf Test chamber lighting: halogen Power: 1.8 kW, 230 volts Iiedpow U U Nhefx Aacjh 0.8 kg refrigerant R404A Temperature range: -40 to +180°C Humidity range: 10 to 98% rH Water tank for 13 liters of demineralized water Simpati control system, color touch display Test programs in automatic mode or manual for temperature and humidity only CE mark Very well-maintained heating chamber from prototype production in the motorsport department of a Wolfsburg-based automobile manufacturer. Only 3,210 operating hours. Unfortunately, no key available. Dimensions approx. 580 x 950 x 980 mm (L x W x H). Weight approx. 190 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'More offers from this seller.'

Year of construction: 2018, condition: new, High temperature chamber furnace, make VEI Iedsdyvkyepfx Aacjih max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Condition: good (used), Chamber filter press Netzsch. 32 plates 47x47 cm. Condition: excellent. Dimensions: 320x140x120 cm. Weight approx. 1.8 tons. Ijdpfx Aajxnx D Uocjih

Condition: used, Type: CS-70/900 CTS Climate Test Chamber with Humidity, water-cooled (converted to R-452a refrigerant) Temperature range: -70°C to +180°C Humidity range: 10–98% RH Test chamber internal dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, Rated current: 35.7 A Chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for buyers: The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) For any further questions, please contact us by phone. Iijdpfx Aajxb Dm Iscsh

Condition: used, mileage: 170,000 km, Year of construction: 2015, Serial number: YV2V001C7FZ10xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20448 Specifications: Km: Approx. 170,000 Transmission: Automatic Suspension: Air Engine brake Euro 6 Good tires Turn on 3rd axle 326 hp 6x2 JOAB on construction Size: 21.7 m HIAB S-HIPRO 130 crane Iiodewphw Aepfx Aacsh Approved until 08.25 Ball clamp Support leg Remote control 1 chamber Weight Rear view camera Radio/CD Air conditioning/AC Videos are available Service history at Volvo Jessheim Ready for delivery Description:Volvo FE320 1-chamber renovation truck from 2015.The truck is equipped with JOAB construction equipment and a HIAB crane.On the sides at the back of the truck, the hoses need to be replaced, it only works the way it is supposed to.It can refer to service history at Volvo Jessheim. Km: 170000 HK: 326 Technical approved: Yes EU-approved until: 22.03.2026 Own weight: 16950 Total Weight: 27000 Payload: 9975 Width: 255 Length: 945 Euro: 6 Model: FE320 Gearbox: Automatic

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available, in stock, new unit with warranty - Temperature: 250°C - Internal dimensions (WxDxH): 1500 x 3000 x 2000 mm - External dimensions (WxDxH): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each An additional 100 programs can be saved/loaded via FTP or USB memory stick - 2 recirculation fans - Double doors with safety door sensors - Over-temperature protection, Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite Iisdslkb Ezjpfx Aacsh - Supply and exhaust air fittings with manual dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Recess for trolley entry - Documentation, CE Declaration of Conformity - Electrical circuit diagram with spare parts list We are happy to offer transport, installation, and employee briefing as an additional service. This new unit is also available with exhaust fan and other configurations! Delivery time approx. 10–12 weeks. Contact us for details! We offer new and used industrial ovens, which we also modify and customize according to customer requirements. Inspection in our machinery hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heat cabinet, recirculation oven, chamber oven, heating chamber, chamber recirculation oven, tempering oven, annealing oven.

Year of construction: 2016, condition: good (used), Maximum temperature: 650°C Internal dimensions: Width 650 mm Ijdpfx Ajxb A E Aoaceih Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm

Year of construction: 2016, condition: new, # suitable for treatment under inert gas Iedpfx Ascdi R Esacjih # with rapid cooling by fan external dimensions (w x h x d): 1500 x 1600 x 2500 mm useable dimensions (w x h x d): 750 x 600 x 1100 mm temperature: 1200°C electrical heated: approx.. 42 kW charge weight: 700 kg

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Iisdpfx Aajxbrkhoceh Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2021, condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7 Ijdpfxsg Dgyms Aacoih

Condition: excellent (used), Heraeus Vötsch Type: VTV 7060-5 Vibration and More ... ... Dynamic and Climatic Reliability Testing Heraeus Vötsch Temperature Test Chamber, Water-Cooled (with chamber feed-through for shaker for vibration testing) Easily test tall samples With the electrically adjustable height of the test chamber, you can easily test even extra-tall test specimens. On-site adaptation to the final shaker height is possible. Standard features, perfect down to the last detail: - Operating terminal with color touch panel - Microprocessor monitoring and control S!MCON/32*-NET - Digital I/O, potential-free - Independent, adjustable temperature limiter tmin/tmax Iijdpsxbgcrofx Aacjh - Adjustable software temperature limiter min./max. - Serial interface RS 232 - Volt-free contact for specimen deactivation - Water-cooled refrigeration unit - Calibration at 2 temperature points - Removable chamber floor with feed-through - 2 pipe ports Ø 50 mm and Ø 125 mm Vötsch Temperature Test Chamber VTV 7060-5 Test chamber volume: 600 liters Temperature Testing Performance: Temperature range: -70/+180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Temperature change rate, heating: 6.0 K/min Temperature change rate, cooling: 6.0 K/min Heat compensation at +20 °C: 5000 W Heat compensation at -20 °C: 5000 W Test chamber dimensions: Width 800 mm, Depth 800 mm, Height 950 mm External dimensions: Width 1225 mm, Depth 2890 mm, Height 2150 mm Height to lower edge of chamber floor min/max: 660/1380 mm Feed-through for vibration system: 710 mm Ø Feed-through for vibration system: 700/700 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Sound pressure level - 1 m in front: 75 dB(A) Refrigerant: R-404A / R-23 Weight approx. 650 kg Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers before delivery: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Delivery scope: (see picture) (Specifications and subject to change, errors and omissions excepted!) For further questions, we are happy to answer your queries by phone.

Year of construction: 2016, condition: new, Gas heated furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW Isdjcditnepfx Aacsih heating power: 120 kW

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Ijdpfxjxbd Rao Aaceih Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) Isdpfx Aaow U Awmscsih If you have further questions, we will be happy to answer them by phone.