Used Ctx 650 Ecoline for sale (5,843)

Condition: good (used), Year of construction: 2011, operating hours: 5,498 h, load capacity: 4,000 kg, fuel type: electric, empty load weight: 4,000 kg, mileage: 5,498 km, This electric tow tractor from the Sill brand is from 2011 and is in good condition;Capacity is 4,000 kg;5,498 hours on the counter;Battery is from 2014 and is equipped with an external charger and automatic filling system;watch the video on YouTube Iasdpfjv Nq Acox Ag Usl

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Ijdpfsm Udfwox Ag Uoal Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: used, machine/vehicle number: 005635, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Iajdswuudyjpfx Ag Uel Position 5: Panel Turning Device IMA + MEINERT-COMBIMA/II/650/A/R3 Position 6: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, all stainless steel electrically heated (= 300 kW) total power 313 kW nett belt length 5.000 mm nett belt width 650 mm frying time min/max : 20-250 sec throughput speed min/max 1,2-15 m/min min. oil volume at oil level of 2cm above the belt : ± 1.009 L Iaodoxp Hhkjpfx Ag Uol max. oil level above the belt : 90 mm setting overheating protection : 220°C adjustable speed outfeed conveyor oil level control circulation pump sediment removal system filter lifting unit with electric hoists weight : 4.000 kg capacity : 3 x 400V, 50Hz

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Professional bottling machine Water4Life FDBG/650 from 2022, in excellent condition. Suitable for both carbonated and still beverages such as kombucha, kefir, soft drinks, juice, beer, etc. Technical details: 8-head isobaric filler Iasdjxxib Sopfx Ag Ujl Capacity: up to 600 bottles/hour Suitable for glass bottles from 330 ml to 750 ml Includes 2 rinsing stations and 1 sanitation tank Compact design, easy to clean and maintain Ideal for small to medium-sized beverage producers Reason for sale: Purchase of a larger line due to capacity expansion. Available from mid-January.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,000 kg, Discover the GEA-CFS SuperFry 5000/650, an industrial fryer specially designed for large-scale continuous frying operations. Its stainless steel design guarantees robustness and durability, making it ideal for demanding food production environments. Thanks to its automated conveyor, it efficiently handles large quantities of food, ensuring even, precise cooking of products. What's more, the SuperFry is equipped with advanced control and safety systems. It allows precise adjustment of passage speed, ranging from 1.2 to 15 m/min, and frying time, from 20 to 250 seconds. As a result, it offers exceptional flexibility to adapt to the specific needs of each production run. In addition, optimized sediment management and oil circulation contribute to superior end-product quality. In terms of technical features, the machine has a power rating of 313 kW and operates at 3 x 400V, 50Hz. Its minimum oil volume is around 1,009 liters, with an oil level 2 cm above the conveyor. Weighing in at 4,000 kg, it is also equipped with electric elevators, a circulation pump and a sediment removal system. Finally, the 16 A amperage requirement testifies to its energy efficiency. This makes the SuperFry 5000/650 the ideal solution for companies wishing to optimize their frying processes while guaranteeing impeccable food quality and safety. Ijdpfju Hhvfsx Ag Usal Technical specifications: Manufacturer: GEA-CFS Type: SuperFry 5000/650 All stainless steel Capacity: 3 x 400V, 50Hz Power rating: 313 kW Adjustable speed Min. oil volume at 2cm oil level above conveyor: ± 1.009 L Weight: 4,000 kg Amperage: 16 A Frying time: 20-250 sec Conveyor speed: 1.2-15 m/min Electric elevators, circulation pump, sediment removal

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm total power requirement kW weight of the machine ca. t Iedpfx Agjfn Aqls Uoal dimensions of the machine ca. m

Condition: used, Year of construction: 2004, operating hours: 78,000 h, 1.0 pc. used injection moulding machine with robot Manufacturer: DEMAG Model: SYSTEM 650/1000-5200 Year of manufacture: 2004 Clamping force: 650 tons Tie bar distance: 1,000 x 900 mm Screw diameter: 95 mm Shot volume: 2,835 ccm³ Ijdpsxauycsfx Ag Uoal Shot weight: 2,560 g/PS Control: NC 4 Equipment: - Robot manufacturer: DEMAG, model: DR633-1131 S3, year 2004 - 4 core pulls

Condition: used, machine/vehicle number: 005642, undefinedPosition 2: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3 Iaodswuciwepfx Ag Uel undefinedPosition 4: Double Sided Squaring/Edgebanding Machines IMA + MEINERT-COMBIMA/II/650/A/R3

Condition: used, Year of construction: 2002, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Transtechnik GmbH Year of manufacture: 03/ 02 Condition: Used Model type: 110/ 650 total length: approx. 1120 mm total width incl. motor: ca. 830 mm total width without motor: ca. 730 mm belt width: approx. 650 mm Belt type: Smooth Color: Stainless steel-grey/ black Material: Stainless steel Drive type: Drum motor Iaodpfx Asktf Nceg Usl Belt conveyor Due to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: ready for operation (used), Year of construction: 1985, An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible. Iajdpfexvdfgex Ag Uol

Condition: like new (used), “2 Pcs. Weserhütte EB 1.000 x 700 / 650mm” for Sale Manufacturer: Weserhütte Ijdpsg I R R Ajfx Ag Uoal Type: EB 1.000 x 700 / 650 Inlet size: 1.000 x 700 / 650mm Electrical Motor: Included See PDF-file below for more detailed information. Crusher is in good working condition. Crusher can be sandblasted and painted.

Condition: used, Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg Iedpfx Asflmm Ieg Ujal

Condition: good (used), Year of construction: 2023, functionality: fully functional, die cushion stroke: 200 mm, table width: 1,000 mm, table length: 1,200 mm, pressing force: 250 t, Ejector in ram - approx. 10 t Iaedsvga H Ejpfx Ag Usl Table drawing cushion approx. 800 x 850 mm Weight approx. 18 tons Stroke approx. 600 mm

Condition: used, machine/vehicle number: 005657, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Iasdpfxewcx Tus Ag Ujl Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 13 nr

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Iajdpfophvl Tjx Ag Usl Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Iasdpfx Ajxr Nvcjg Uol

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Iaedpfx Aornkw Dog Usl Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Layers: 5 Web Width: 1,500 mm Film thickness range: 10–45 μm Output: - 15 μm: up to 745 kg/h - 17 μm: up to 845 kg/h - 23 μm: up to 905 kg/h Final film widths (per bobbin): - 3 x 500 mm - 6 x 250 mm - 3 x 400 mm - 2 x 750 mm Coextrusion Structure / Number of Layers: 5 layers Layer distribution: B / A / D / A / C Percentage: 10 / 35 / 10 / 35 / 10 % Raw materials: - LLDPE: 2.8–5.0 g/10min (190°C/2.16kg) - VLDPE: 2.8–5.0 g/10min (190°C/2.16kg) Extruder "A": 90/33 L/D, Maximum LLDPE output: 800 kg/h Extruder "B": 60/28 L/D, Maximum LLDPE output: 200 kg/h Extruder "C": 60/28 L/D, Maximum LLDPE output: 200 kg/h Iaedsxyuffepfx Ag Uel Extruder "D": 60/28 L/D, Maximum LLDPE output: 200 kg/h Flat die lip width: 2,050 mm Roll width: 2,100 mm Chill roll C1 diameter: 1,600 mm Maximum mechanical speed: 650 m/min MATERIAL FEEDING AND DOSING "A": - 1 main component material feed - 1 additional component material feed - 1 gravimetric batch dosing system (mounted directly on the extruder, 3 components) MATERIAL FEEDING AND DOSING "B, C, D": - 3 main component material feeds - 6 additional component material feeds - 3 gravimetric batch dosing systems (mounted directly on the extruder, 3 components each) Extruder "A": - SML Single-Screw Extruder SML-ES-90/33 - Tool unit: Manually operated screen changer SML-MF-man/90 Extruder "B, C, D": - 3 SML Single-Screw Extruders SML-ES-60/28 - 3 Tool units: Manually operated screen changers SML-MF-man/60 Cloeren 5-layer/3-up Stretch Film System consisting of: - 1 five-layer feedblock FG - 1 automatic flat die, 2,050 mm (for automatic die control) - 1 die splitting system for flat die body separation and cleaning - 1 vacuum box, 2,050 mm - 1 triple-chamber vacuum box SML-TC/2050mm Cooling and take-off unit: - 1 casting section SML-CS/2100/650 - 1 electrostatic edge pinning device - 1 thickness measuring unit (X-ray sensor for automatic dies, stretch wrap film) - 1 recovery system for feeding stretch wrap film with vertical scraptruder for SML 90 mm single-screw extruder - 1 antistatic pipe - 1 power supply unit for antistatic pipes Winding unit: - 1 Cast Film Turret Winder Series W4000 for stretch wrap films - Max. end film width: 3 x 500 mm - Number of turrets: 1 - Number of winding shafts: 4 - Winding shaft diameter: 3" - Max. mechanical winding diameter (3" bobbins): 400 mm - Min. winding diameter: 82 mm - Winding tension: 15–100 N/m - Contact pressure: 50–500 N - Cycle time (3" core magazine): 20–25 s - High-speed Cast Film Turret Winder for stretch wrap film—compatible with 3" air shafts, contact winding mode - 1 automatic core and roll handling system W4000 4S1T (per turret) - 1 oscillating frame SML-OF/2100 Control and data logging: - 1 SML Automatic Control System SML-CS-2/SMILE/4 extruder - 1 SML Data Logging System: SMILE Process Analyzer - 1 E-container (20 ft) Chiller: Frigosystem Compressor unit: MSD V 30-37

Condition: used, Winkelschweißmaschine /Semi-Automatic Foil sealing machine Kallfass KC 8060/650 Großformat Winkelschweißmaschine / Large Size Foil sealing machine Baujahr / Year 1985 - Serial-No. V 7.85.029 Schweißrahmenabmessungen / Sealing Frame size 600 x 800mm Schrumpftunnel Abmessungen Breite 710mm und Höhe 290mm Shrink Tunnel Dimensions Width 710mm and High 290mm Durchlasshöhe Produkte 280mm Folie, Halbschlauchfolie 12 - 80 μm Iodpfx Aov Hp R Hsg Usal Transportbandgeschwindigkeit 2,5 - 12 Meter / Minute Verpackungsleistung, max. 20 Takte / Minute Spannungsversorgung 208 - 480 Volt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Iajdpfx Agevw Ev Hj Uol Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, mileage: 1,001 km, first registration: 01/1980, color: white, driver cabin: other, gearing type: other, Year of construction: 1980, Equipment: cable winch, crane, Vehicle location: Bovenden, foldable, 2-point hydraulic outriggers, 1x hydr. extension, cable winch Superstructure: Rear crane Hiab 650/1 with cable winch Load diagram: 1.7m-3700kg, 5m-1250kg! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iedpfx Aovcq N Nog Uoal - .

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Iaedpfx Aeugmx Aog Usl

Year of construction: 2017, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, For sale: 1 gas-fired chamber oven with air circulation and bogie hearth Manufacturer: Nolzen Industrieofenbau GmbH & Co. KG Type: KLWg 220/180/650 YEAR OF MANUFACTURE: 2017 for unsupervised operation for three-phase 400Volt three-phase current for temperatures up to max. 700 degrees C. for natural gas "H", liquid gas Number of burners: 8 Total burner output: 720kW For further technical data see attached PDF. Iaedpor Hmg Rofx Ag Ujl The stove itself was only in operation for 4 years and has made approx. 100 anneals of 23 hours each during this time.

Year of construction: 1985, condition: ready for operation (used), Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site. Ijdpfxjq Ikawj Ag Ueal