Used Ctx 650 Ecoline for sale (6,134)

Condition: new, Year of construction: 2024, Ditch Rotary Tiller TK 650    • Adjustable spreading valve Todpfowx Ui Dsx Ahuof    • Interchangeable blades, 12 pieces    • Working width 120 mm (bottom of the skid)    • PTO shaft with shear bolt coupling    • PTO drive 540 rpm Condition: New Year of manufacture: 2024

Condition: used, tank capacity: 650 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: The tank was originally mobile on 4 plastic castors, which are no longer present; for stationary installation, either the castors must be replaced on site, or the feet must be suitably shimmed, as the bottom/outlet extends beyond the end of the feet External diameter: 1,120 mm Internal diameter: 1,000 mm Total height: 1,600 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 148 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 1.70 bar Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 650 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 700 mm Previous use: Pharmaceuticals TANK Max. operating temperature tank / °C: 148 °C HEATING/COOLING JACKET Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel FEATURES Manhole / dome: in the top, handhole Outlet (alternative entry): 35 mm Tjdpfx Aoxqc Nmshuof Note: Pressure marks on insulation jacket, scratches inside MATERIAL PROPERTIES External surface: ground Internal surface: ground Material of feet: Stainless steel

Condition: used, Year of construction: 2022, Milling machines Travel distance X: 1050 mm Travel distance Y :900 mm Travel distance Z: 600 mm HSC-machines Number of axis: 3 milling machine / machining center Todpfx Aow D E Hkjhujf Control: Heidenhain spindle chuck: HSK63 spindle revolutions: 20000 rpm tool changer: 120 - time spindle cooling chip conveyor control Heidenhain Heidenhain control unit, type iTNC 530 Table load capacity: 3,000 kg Knoll chip conveyor Tool changer for 120 tools

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Manufacturer BARBERAN Model ECOLINE 1400 S Type of machine Laminating machine Year of manufacture 2007 Readiness dismantled / stored Technical data: Material width max mm 1300 Principle Thermal lamination Film storage Width of film max mm 1300 Material thickness min mm 3 Material thickness max mm 70 Feed rate max m/min 25 Feed rate infinite Machining Single-sided Clamping Steel roller Vacuum Brushing machine Glue application Roller application Storage space 1 Heating device Infrared CE mark Todpfxsrur Txo Ahusf

Year of construction: 2004, operating hours: 25,218 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Main Drive Number of axis 3 Additional Equipment Chip conveyor included Forkardt lathe chuck Ø400 with several sets of jaws (approx. 100 sets) Tsdpfx Aexr R A Djhujf This 3-axis Gildemeister CTX 520 linear was manufactured in 2004. It's a horizontal turning machine designed for precision and efficiency in metalworking. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 520 linear machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1539000478E, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Siemens Sinumerik 810D Powerline, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel in X-axis: 1,035 mm Travel in Y-axis: 560 mm Travel in Z-axis: 510 mm Tsdpfx Aoxrzz Djhujf Table size: 1,200 mm x 560 mm Maximum workpiece weight: 1,000 kg Spindle speed: 10,000 rpm Tool holder: SK-40 Spindle motor power: 18.5 kW Tool magazine positions: 20 MACHINE DETAILS Control: Siemens Sinumerik 810D Powerline Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,550 x 2,600 mm Weight: 5,500 kg

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Tjdpjxwyvqefx Ahusf

Condition: used, tank capacity: 650 l, GENERAL Design: horizontal Internal diameter: 700 mm Total length: 2,000 mm Support type: saddles Location: Bremen Volume: 650 litres Wall thickness (cylinder): 4.0 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical length: 1,580 mm Last application: chemical industry VESSEL Heads: Klöpper heads Number of supports: 2 pcs EQUIPMENT Outlet: flange DN40 Note: slight residues MATERIAL SPECIFICATION Flange material: steel Support material: wood TECHNICAL DATA / DIMENSIONS Wall thickness (heads): 3.0 mm Todjxqcg Eopfx Ahuef

Condition: used, Year of construction: 2012, DMG CTX 620 linear Turning diameter: 600 mm Turning length: 2000 mm Control: Siemens 840 D powerline Main spindle speed: 2,500 rpm Total power requirement: 72 kVA Tedpfx Ahexzccbeusf Machine weight approx. 12 t

Condition: good (used), Year of construction: 2018, lifting height: 21,630 mm, fuel type: diesel, General information Mileage: 52.524 km Weights Empty weight: 3.280 kg Functional Lifting capacity: 250 kg Working height: 2.363 cm Working width: 300 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1130 m Transport dimensions (LxWxH): 0,00693x0,00216x0,00252 Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: Ecoline RS240 Year of build: 2018 Condition: Used Data: Max. working height: 23,63 m Max. platform height: 21,63 m Max. reach: 11,30 m KM-reading: 52524 km Typ: Diesel Total dimensions LxWxH: 6,93 x 2,16 x 2,52 m Platform dimensions LxW: 1,30 x 0,70 m Max. basket load: 250 kg Swivel range: 2 x 185° Ground pressure: 29,5 kN (vorne) / 19 kN (hinten) Tjdpfx Asxmrdljhujf Ground clearance: 0,16 m Support width vertical: 2,14 m Support width one side: 0,00 m Support width both sides: 3,00 m (vorne) / 2,14 m (hinten) Support length: 3,30 m Own weight: 3.280 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x 90°, advantages: articulated telescopic design for working behind obstacles. Information: Tüv and UVV new Location: 41468 Neuss: immediately available

Condition: good (used), Year of construction: 2011, CNC Milling and Turning Center Tedpfx Ajxvaqrehusf Machine Type: DMG CTX beta 1250 TC Control: Siemens 840 D solutionsline + ShopTurn Year of Manufacture: 2011 Available from: February 2026 TECHNICAL SPECIFICATIONS: Maximum turning length: 1,250 mm Turning diameter: 390 mm Bar capacity: 75 mm Main Spindle Speed range: 0 - 5,000 rpm Drive power: 34 / 25 kW C-axis: 0.001° 3-jaw chuck: Röhm KFD-HS 250-91 mm Counter spindle: ISM 52 Speed range: 6,000 rpm Drive power: 27 / 20 kW C-axis: 0.001° 3-jaw chuck: Röhm KFD-HS 200-66 mm CNC spindle swiveling for milling and turning operations B-axis: +/- 110° Speed range: 15 - 12,000 rpm Drive power: 22 kW Torque: 100 Nm Tool holder: HSK 63 Tool stations: 24 Y-axis: 100 +/- mm Machine weight: 8,000 kg Footprint (LxWxH): 5.67 x 2.72 x 2.1 m Features: Chip conveyor High-pressure pumps: 8/20/80 Paper band filter Coolant tank: 980 l Oil mist extraction Tool breakage control: Renishaw

Condition: excellent (used), 650 liter capacity. Made in 2022. Tedox Av S Sspfx Ahujf

Condition: used, Year of construction: 2011, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Siemens SlimLine Shopmill C-Axis 360 ° b-axis -5/+110 ° spindle tunring speed 8.000 U/min number of tool places 16 Pos. table surface area 630 x 500 mm spindle drive 13 kW Number of working hours ca. 30.900 h spindle hours ca. 300 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled - approximately 300 spindle hours Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Tsdpjxp R D Aofx Ahusf subject to prior sale!

Condition: used, tank capacity: 650 l, GENERAL Tjdpfxsxqcb Aj Ahuof Design: rectangular Remarks: Internal (movable) fittings; the outlet was probably fitted with a valve or fitting, but it is no longer present (see photos) Overall width: 800 mm Overall height: 1,300 mm Overall length: 1,500 mm Top: removable / hinged lid Base type: feet Location: Bremen Nameplate: Volume: 650 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Last application: pharmaceutical industry TANK Number of feet: 4 pcs EQUIPMENT Outlet: present MATERIAL SPECIFICATION Outer surface: polished Inner surface: polished Feet material: stainless steel

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 630-650-500 RA1478 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 630 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Tedpfok Abccsx Ahuof For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2011, CNC Turning and Milling Center Machine type: DMG CTX Beta 800 V3 Control: Siemens 840D Year of manufacture: 2011 TECHNICAL DATA: Max. turning length: 800 mm Turning diameter: 380 mm Max. turning diameter over bed: 700 mm Spindle bore: 67 mm C-axis Main spindle: ISM 76 Spindle speed range: 0 - 5,000 rpm Drive power: 25 kW Number of turrets: 1 Tool positions: 12 Driven tools: 6 Tailstock Tsdpexvap Iefx Ahuef Equipment features: Chip conveyor

Condition: used, tank capacity: 650 l, GENERAL Equipment: Spray head Design: vertical Remarks: Internal metallic discoloration Speed: 1415 rpm Todpfx Ahoxqa T Nsuef External diameter: 1,040 mm Internal diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX directives under local conditions must be verified) Overall height: 2,380 mm Heating/cooling: available Insulation: available Power: 1 kW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. excess pressure: 1.50 bar Agitator: propeller type of support: legs Location: Bremen Technical documentation: drawing, inspection certificate Cylinder temperature control: half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Last application: pharmaceutical industry TANK Max. operating temperature tank / °C: 170 °C Number of legs: 4 HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation cladding: hermetically welded Insulation cladding material: stainless steel EQUIPMENT Manway / dome: in the top section (DN 400) Outlet (alternative entry): 25 mm MATERIAL QUALITY Leg material: stainless steel AGITATOR Voltage: 220/380 V Agitator arrangement: eccentric in the top section TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.0 mm

Condition: used, Year of construction: 2001, Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Todpfx Ajk Abckjhusf Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 780-650-500 RA1430 The Lippert conveyor belt is from 2001 and in good (used) condition. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converte adjustable Drive: SEW gear motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: motor with MOVIMOT frequency inverter to control the speed Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Todpek Abumofx Ahusf With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 1090-650-500 RA1425 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2001 Tedjk Abaaopfx Ahujf Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 780-650-500 RA1430 The Lippert conveyor belt is from 2001 and in good (used) condition. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 780 mm Tsdsk Abahspfx Ahujf Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converte adjustable Drive: SEW gear motor R17DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-5E Year of construction: 2001 Optionally available: motor with MOVIMOT frequency inverter to control the speed Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveyor length (NL): 6150 mm (ascending conveyor 2310mm + upper straight 3840mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Tedek Abawopfx Ahusf Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with Arch and Straight GF 6105-650-500 RA1448 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6105 mm (ascending conveyor 3180mm + arch 500mm + upper straight 2425mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Tedpsk Aba Ejfx Ahujf Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending conveyor GF 6960-650-500 Tjdok Abbfopfx Ahuef RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Tedpsk Aa Txsfx Ahujf For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics