Used Ctx 400 for sale (18,351)

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe Hnedpezpwixefx Abrer ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 502,289 km, power: 294 kW (399.73 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 6,600 mm, total width: 2,500 mm, total height: 3,060 mm, Year of construction: 2008, Equipment: AdBlue, = Additional options and accessories = - PTO = Notes = Despite our best efforts to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,780 cc Front axle: Steered; Suspension: Leaf spring Rear axle: Twin tires; Suspension: Air suspension Hnodpfx Abszr Rw Uerjr Weights Unladen weight: 9,670 kg Payload: 10,330 kg GVW: 20,000 kg Functional Pump: Yes Condition Technical condition: very good Optical condition: fair Further information Please contact Thierry Leemans for more information.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle motor power: 58,000 W, spindle speed (max.): 4,000 rpm, total height: 3,000 mm, total width: 4,500 mm, overall weight: 9,000 kg, product length (max.): 9,500 mm, number of axes: 2, Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine. - Turning Diameter: 400 mm- Swing Diameter: 420 mm- Spindle Head: DIN 55026 - Size 11- Spindle Bearing Diameter: 140 mm- Rapid Traverse X + Z Axes: 45 / 30 m/min- Feed Force Z/X: 11 kN- Total Power Requirement: 58 kW- Installed Power (Nameplate): 54 kW- Frequency: 50 Hz- Voltage (Power): 400 V- Control Voltage: 230 V- Nominal Current: 104 A- Cos Phi: 0.83- Fuse Protection: 125 A- Features: Hard turning, Dry machining, Chip conveyor Technical Specification Driven Tools No Hnsdpfjzrnwrsx Abrjr

Condition: used, empty load weight: 9,630 kg, maximum load weight: 26,370 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 08/2015, loading space length: 13,310 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, loading space volume: 86 m³, total length: 13,310 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: white, Year of construction: 2015, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, truck registration, Reference number for inquiries: 41685 Schmitz, SCB S3B * Year of manufacture: 2015 * ABS, Anti-lock Braking System * Air suspension * Portal door * Refrigerated box * Air connection, coupling head (red + yellow) * Connector plug, 2x7-pin * Connector plug, 15-pin * Lifting and lowering system * Deep-freeze unit * Temperature recorder * Rail system for meat hanging * Aluminum floor * Refrigeration unit, Thermoking * Diesel + Electric * Suspension: Air * Gross vehicle weight: 36,000 kg * Tare weight: 9,630 kg * Payload: 26,370 kg * Permissible gross vehicle weight: 36,000 kg * Axle manufacturer: Schmitz Rotos% * Tire condition, 1st axle: 70% - 70% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 80% - 80% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 70% - 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13310 mm, W=2500 mm, H=2600 mm * Internal volume*: 87 m² * Pallet spaces: 33 * Refrigeration unit type: Thermo King SLXi 400 * Diesel operating hours: 5630 hrs Hnsdpfx Abjzt U S Esror * Electric operating hours: 111 hrs Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists for advice.

Condition: used, mileage: 730,000 km, power: 291 kW (395.65 HP), first registration: 02/2017, axle configuration: 4x2, wheelbase: 3,800 mm, color: other, driver cabin: sleeper cab, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, DAF CF 400, 2017, Space Cab = More information = Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Max. front axle load: 8000 kg Max. rear axle load: 11500 kg Weights Hnedpfx Ajzr Ncvsbrjr Empty weight: 7.383 kg Carrying capacity: 12.117 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Identification Registration number: 82-BJF-8 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 625,000 km, power: 291 kW (395.65 HP), first registration: 01/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, emission class: euro6, total length: 5,920 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2016, DAF CF 400, 2016, Space Cab = More information = Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Max. front axle load: 8000 kg Max. rear axle load: 11500 kg Weights Empty weight: 7.378 kg Hedpjzr Nbxofx Abrsnr Carrying capacity: 12.122 kg GVW: 19.500 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Maintenance APK (MOT): tested until 01/2027 Identification Registration number: 94-BGP-3 = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 518,000 km, emission class: euro5, Year of construction: 2008, Year of construction: 2008 Hnsdpfxoy Avalo Abrsr

Condition: as good as new (ex-display), machine/vehicle number: G-V7-LBM2200-2S-RL-400-Schweiz, Exhibition machine Hans Schreiner long hole drilling machine with one-hand operation. Optimum work thanks to fixed table and movable drill head. Standard with left/right rotation, dowel drilling device and 2-speed motor including tool compartment, eccentric clamp, miter stop Technical data: Motor output 3.8 kW Voltage 400 V Table size 570 x 300 mm Hedpfsvw Edqjx Abrenr Max. drilling depth 150 mm Side travel 290 mm Height adjustment 140 mm Dowel drilling device 16, 20, 22, 25 mm hole spacing Max. drill holder 20 mm Speeds 1400/2800 rpm Weight 140 kg Suction connection 100 mm Packaging dimensions 855 x 600 x 1160 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: 12949, Rotor diameter: 400 mm Rotor width: 600 mm Rotor blades: 3 Stator blades: 2 Hedpjyr Trvofx Abronr Inlet cross-section approx. 400 x 600 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm Hnodpfx Abeyr Tqlerer 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Rotor blades: 3 rows Hjdpjzp Slzefx Abrenr Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Hnodpfeyr Tv Iex Abrjr Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: new, machine/vehicle number: 13358, Rotor diameter: 400 mm Rotor width: 1000 mm Rotor knives: 3 x 2 Stator knives: 2 Feed opening approx. The compact inline granulators of the GST 400 series are primarily designed for use in blow molding applications to recycle bulky parts such as bottles, canisters, and crates, as well as blow molding and injection molding sprues. Hnsdpjy E Altofx Abror The low feed height allows for both manual loading and feeding of these parts via conveyor belt. The low noise level and small footprint make them the ideal solution for inline recycling applications.

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Hsdpfx Ajyr I Hbsbrjnr Width: 800 mm Rotor blades: 5 Stator blades: 2 Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Hnsdjuzn Nnspfx Abrsr Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear With pipe shear clamp on the bar shear Foot switch for lift release support table on the stamping side Hedpfxow Im Shs Abrjnr Quick-change device Great condition Range of tools included in the price

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed Hnedpfx Abjzlyz Nsrer 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, Year of construction: 1995, Technical details: turning diameter: 480 mm turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min Hjdozn N R Espfx Abronr weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders *

Year of construction: 1965, condition: used, Manufacturer: Alpine Model: 400 Z Hjdpfx Aezmi Hkebrjnr Year: 1965 Type: Pin mill Rotor diameter: 400 mm Engine power: 22 kW ATEX classification: Ex II2G Ex daIIC T4 Maximum permissible speeds of drive shafts: 2,500 – 7,500 rpm Materials : House : Cast iron Rotor / Stator: Stainless steel Door with minor warping taken into account during refurbishment (suitable seal fitted, tightness ensured)

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective Hnjdpezub Nmefx Abror If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Automatic bandsaw AMADA HFA 400 W (Year of manufacture: 2016) Cutting capacity: Round material: diameter 420 mm Square material: 400 x 400 mm Feed length: 5 - 470 mm Multiple feed length: up to 9999 mm Chip conveyor Hsdpfx Aezrz Ahjbronr Drive power: 5.5 kW Saw blade speed: 15 - 90 m/min, infinitely adjustable Piece counter Weight: 2200 kg *The saw is in very good condition and fully functional.*

Condition: good (used), functionality: fully functional, For sale is a trimming machine from Alexanderwerk, type: AWS 400, 400V / 16A / 0.4kW. The machine is fully functional and ready for immediate use. Cutting width approximately 39 cm. Blades are new. Inspection and test run are possible. Further information available upon request. Payment in cash or by prepayment. Hnodpezcwvtjfx Abrsr Sale only to commercial businesses. No guarantee, no warranty.

Condition: used, Portable firewood saw for cutting up strips, branches and other waste wood. Technical data: - Length: 950 mm - Width: 600 mm Hnsdpfx Aszryt Ssbrsr - Cutting height: approx. 60 mm - Motor: 2.2 kW - Connection: 16 A / 400 V

Condition: used, Amada Mega BS 400 SA, with swivel base, Dec 1989 Hedpfox Rkycjx Abrsnr

Condition: ready for operation (used), Year of construction: 2005, 1 used CNC lathe with driven tools and Y-axis. Control system: Siemens. Hnsdpfxezgtgbj Abror The machine can be inspected while powered on, by prior arrangement.