Used Cross Table for sale (20,193)

Condition: new, number 57 Positionen weight 98 kg condition neu 28 mm Set 2: 57 pieces, 28mm system, consisting of: Clamps: 6 x 280610.N Clamps: 4 x 280630.N Prism: 4 x 280648.1.N Bolt: 18 x 160511 Magnetic bolt 4 x 280740 Stop: 6 x 280410.N Stop: 6 x 280420.N Angle: 4 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Accessory set. 1 x 283999 Price plus packaging and transport. Pjdpfx Aksfh Uw Rjiogu

Condition: new, table length 2900 mm table width 1200 mm table height 900 mm table load 3000 Kg Pgjdpsd Iinaofx Akiou weight of the machine ca. 0,77 t dimensions 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm Pedpfxod Iincj Akisgu The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 1400 mm table width 1400 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,5 t dimensions 1,4 x 1,4 x 0,9 m Welding table / hole table: Pedpfxjd Iinds Akisgu Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. Pgsdpfx Asd Rawzskiju

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,99 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional Extreme 850 + Plasma Nitride" is made of through-hardened tool steel from the special alloy Siegmund X8.7 and is plasma nitrided. Pgsdpfxod Raw Ao Akiou Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27 mm. The holes have a diameter of 28 mm. Hole arrangement on the tabletop in a 100 mm diagonal grid, parallel hole arrangement on the sides in a 50 mm grid. Includes basic leg assembly. Accessories shown are optional. Price excludes packaging and shipping.

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell Pgsdpol R Nnvjfx Akiou turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: new, table length 1500 mm Podpfjmhm Auex Akisgu table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Pjdpsh Dqb Djfx Akijgu Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm Pgedpfxofv Awzs Akieu table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1200 mm table load 1,2 t Pgjdpfxofv Aw Ne Akisu swivelling range 0 - 120 Grad turning speeds 0,06-0,6 U/min max. torque on the faceplate 2400 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,75 + 1,1 kW weight of the machine ca. 1,0 t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 2,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t Pedpfx Ajfv Aw Tokiegu ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right).

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. Pjdpfxefv Axmo Akisgu • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission Psdpfx Asfv Aykjkiegu

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm Psdpfxefv Ayyo Akisgu max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere Pedpfxofv Ay Se Akiegu including remote control and welding current transmission.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere including remote control and welding current transmission. Pgedpfx Ajfv Azhokiju

Condition: new, number 37 Positionen 28 mm condition neu weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Pgodpfx Akogazl Roieu Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Pedpjgazl Uefx Akisgu Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Pgedogazmkepfx Akisu Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, number 57 Positionen 22 mm condition neu weight 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Pgodpfxsgazmrs Akiju Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm Pedpfx Akega Nh Hsijgu table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, table length 2000 mm table width 1000 mm table height 850 - 900 mm weight of the machine ca. 0,45 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. Very sturdy base, so the Pedpfogp Dymox Akijgu Table can be moved with a pallet truck. The accessories shown are optional! Pallet truck is not included in the scope of delivery

Condition: new, number 27 Positionen weight 52 kg condition neu 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs. Podpfjgp Dyuex Akiegu

Condition: used, For sale: Pjdpfx Aksz Eyntjijgu 7 pallet lifting/tilting tables with roller conveyors. Dimensions and weights are shown in the photos. Prices: €1.25 per kg. All items sold together: €1.00 per kg.