Used Cross Folding Unit for sale (38,713)

Condition: used, In this offer, you are buying a used ‘Ricoh Multi Folding Unit FD5020’. Iedpfsrvhz Uex Ag Usht Subject of sale: 1 x Ricoh Multi Folding Unit FD5020 for various Ricoh Pro models Ricoh Pro C7100 Series Ricoh Pro C9100 Series Ricoh Pro C7200 Series Ricoh Pro 8200 Series Ricoh pro 8300 Series Condition: This is a used device that may show signs of use. (small scratches or yellowing). The device has been functionally tested. Packaging and shipping: You are welcome to come and see the appliance during our office hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping are available on request! For further information, please contact us personally.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Ijdpfjx Ncu Nox Ag Ujht Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length Ijdpfx Agjbidg Eo Uoht

Condition: ready for operation (used), Year of construction: 1980, Herzog Heymann small folding machine KL112, year of manufacture 1980/1985 Iedpfxsvyapyo Ag Ujht Schuppen feeder 176 1st station KL112 with 6 pockets 2nd station KL112 with 4 pockets Vertical stack delivery 177

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Iodpfex Hbkdex Ag Ueht Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed

Condition: ready for operation (used), Year of construction: 2006, MBO folding machine T800.16, built in 2006 Round pile feeder R800 1st station T800.1 with 6 pockets Preparation for glue Segmented rollers Transfer table 2nd station T68-4 with 4 pockets Cutter shaft cassette Transfer table 3rd station T56-4 with 4 pockets Cutter shaft cassette RFE turning unit Horizontal delivery FA 66 ME Optional: Ihjdpfevyaqkox Ag Uot HHS cold glue device X-Trend, built in 2006 4 channels 1 glue head

Condition: ready for operation (used), Year of construction: 1996, Technical data: Working width 50 cm, 2 folding pockets Isdpfew E Rlnjx Ag Usht

Condition: ready for operation (used), Year of construction: 2003, MBO folding machine K76/6 KTL, built in 2003 Round pile feeder 1st station with 6 folding pockets + a folding roller upstream preparation for glue Downstream knife shaft K-part Ihedpfxjvyaqqj Ag Ust 2 folding blades lying pocket Horizontal delivery FA 66/ME Pump

Condition: ready for operation (used), Year of construction: 1999, Herzog Heymann small folding machine KL112 – 1250, year of manufacture 1999 Ihedpfexlu Tysx Ag Ujt Flat pile feeder, shingled, 176–646, station with 6 pockets Cold glue unit HHS C210 with one glue head 6 segmented folding rollers The second station is not available!

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump – Window folding pocket Ihjdpfx Agex Endue Ust – Various spare parts

Condition: like new (used), Year of construction: 2020, Lid Removal System for Capsule, 16-cavity Short Description: The lids are removed from the open mold using the removal arm. The injection-molded products are extracted on the ejector side. Presence of the parts is checked on the removal arm. As soon as the removal arm reaches its end position, the lids are transferred into the prepared box by a vertical servo axis. Ihedpfxowuk Sgs Ag Ust Once the box is full (by counting lids), the box is conveyed outwards and the next empty box is brought in. Technical Data: Product type: round lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 IML system cycle time: 5 s

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, MBO Z6 Year of manufacture 2002 Mobile knife folding unit with independent control Infeed width: min. 150 mm – max. 480 mm Infeed length: min. 80 mm – max. 320 mm Iedpjxukm Uefx Ag Ujht Infeed height: min. 450 mm – max. 650 mm Speed: min. 20 m/min – max. 160 m/min Productivity: 15,000 cycles/h Immediately available

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm Ihjdpfsh I Ahxox Ag Uot with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Ijdpfxsvwlqqo Ag Uoht Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Ijdpfxsilx Sre Ag Ueht Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Ihsdpfoun Nn Dox Ag Uet Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 3. Station Eigensteuerung / Folding Unit 3. Station SelfControl MBO T79-3-46/2Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Iodpfx Agoilx Sns Usht Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, machine/vehicle number: 1, Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Ihodpoivbbzsfx Ag Uot Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometerAuf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1993, machine/vehicle number: 43930306, Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z6Year 1993 - Serial-No. 43930306-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 25.000 cycles/h Online-Video-Inspection by Skype-Video Ihodsv D Rqvepfx Ag Ust We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, machine/vehicle number: 103638, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZ Year 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles Ihsdpfjmikq Ajx Ag Ust 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1986, machine/vehicle number: 20860601, 3. Falzstation - Eigensteuerung - 3. Folding unit - SelfControl MBO T92/444 - 56/4Year 1986 - Serial-No. 20860601 Infeed width max. 560mm 4 buckles SELFControl Iodpeh Ax Axefx Ag Ueht Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Type ACC 2.4 Iodpfx Agod H Ncpe Uoht

Year of construction: 1991, condition: used, The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank. Additional title: yeast-beer recovery Capacity: 7 hl/h Tol. operating pressure: 10 bar Tol. operating temperature: 85 °C Iedpfx Asvcq Daeg Ujht Max. filter area: 26 m^2 Current: 4,85/2,8 A Voltage: 220/380 V Frequency: 50 Hz Operation / Control: Simatic S5 Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Condition: good (used), Year of construction: 1985, functionality: fully functional, Pocket – knife folding machine (cross fold machine) MBO – working width till 52 cm, year of manufacturing 1985, good condition, modell K 54/4 KL. Isdpfjrrw Rkex Ag Uoht Technical description: Maximal format: 52 x 80 cm. High pile feeder with automatic sheet separation head at the back of the pile. Counter. 4 folding pockets. 1 folding knife perpendicular to the folding pockets. Mobile chute delivery for the full working width of the machine - till 52 cm. Year of manufacturing: 1985. Good condition. Possibility of inspection that machine.

Condition: used, Heidelberg Stahlfolder Folding units for first pocket is a machine manufactured by Heidelberg Stahlfolder, with a format of 520 mm. Currently stored in Germany, it includes one first station No. 3 gate fold, four folding pockets for Heidelberg Stahlfolder TI 52 first unit, one first station No. 2 gate fold, one first station No. 4 gate fold, and one first station No. 1 gate fold. The delivery terms are FCA. Format: 520 mm Equipment: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit Ijdpfx Aevfxtujg Ujht 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 3 gate fold 1x 1.ST Nr. 4 gate fold