Vise

Year of construction: 2010, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rotational speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 480 mm Z-axis travel: 325 mm Max. spindle speed: 15,000 rpm Spindle power: 5.5 kW Gedpfx Afsypbmio Teip Tool holder: BT 30 MACHINE DETAILS Tool changer: 8 positions EQUIPMENT Tools

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Gsdpexf Ey Refx Af Teip Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, TECHNICAL DETAILS Drum diameter: 340 mm Gijdpjymx N Asfx Af Tjp Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Gijdpfx Afjymxyno Tep Diameter: 3,500 mm Cylinder height: 5,000 mm Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection DN80 PN10 connection for filling line Connection with blind flange Connection for overflow Connection for level switch

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swing diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 1/min Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with recirculating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device Gisdpoir Igwefx Af Top - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as a gearbox version

Condition: new, Year of construction: 2024, functionality: fully functional, workpiece weight (max.): 25 kg, product height (max.): 150 mm, product length (max.): 930 mm, product width (max.): 500 mm, production capacity: 100 unit/h, For sale is a new semi-automatic bottom-up bagging system. The system was purchased in 2024, has been dismantled, repackaged, and has never been operated. The original purchase price was €235,000! TECHNICAL DETAILS (according to the manufacturer) Performance: approx. 100 bags/hour Bag weight: 20, 25 kg Bag sizes: bag width 500 mm, bag length 700–930 mm, bag depth 150 mm Bag material: Paper (2–5 layers) with PE inner liner or PE Weighing range: 10–30 kg Weighing accuracy: 2 Sigma +50g/–0g Weighing accuracy: compliant with PTB MACHINE DETAILS Footprint: (approx.) 20 x 4 m Control voltage: 400 V, 50 Hz – 24 DC, 3 phase Electrical power: 15 kW Electrical components: Siemens/Eaton PLC: S7-300 Drive motors/Gearboxes: SEW Pneumatic components: Festo Material: Stainless steel DIN 1.4301 Cable tray: Brand Cablofill Protection rating: IP54 Zone: ATEX zone, inside zone 20 up to 500 mm radius, zone 21, 500–1000 mm radius, zone 22 Working pressure: 6 bar Compressed air consumption: V = 89 Ndm³/bag Pneumatic connection: 5–6 bar Air requirement: 400 Nl/min Protection class: IP54 Aspiration air: 45 m³/min Godpfsymxtzjx Af Toip Note: Additional technical data can be found in the attached order confirmation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 28,459 h, machine/vehicle number: A0220A2141, controller model: Siemens Sinumerik 840 D, laser power: 4,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Maximum sheet thickness (mild steel): 20 mm Maximum sheet thickness (stainless steel): 15 mm Maximum sheet thickness (aluminium): 10 mm Laser power: 4 kW MACHINE DETAILS Control: Siemens Sinumerik 840 D Laser type: TruFlow 4000 Gjdpsyttnajfx Af Teip Laser power: 4 kW Type: CO2 Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours (as of January 2026) Beam on hours: 28,459 h Laser on hours: 51,970 h Note: The machine is currently already dismantled.

Condition: excellent (used), Knuth UFM 2 universal milling machine Technical data X-axis travel (manual) 800 mm X-axis traverse path 750 mm Traverse path Y-axis 300 mm travel Z-axis 400 mm table size 1320x320 mm T-slots 5x14x63 mm Feeds Gisdpfx Aonfu Rijf Tsp Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45 Cone of horizontal spindle SK 50 Drive Main motor power 4 kW motor power in Z axis 0,75 kW feed motor power 0,55 kW cooling pump motor power 0,09 kW Coolant pump capacity 25 l/min Dimensions and weight dimensions 1900x1720x1750 mm weight 2100 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Gedpfxoymxqts Af Teip Chip flushing Chip conveyor

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! Gsdjymxlqjpfx Af Teip The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW Gijdpfx Aenzpx Rof Tep -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Gedpfx Aoymxi Asf Toip Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 1,660 mm Y-axis: 760 mm Z-axis: 660 mm Table size: 760 x 2,000 mm Max. table load: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket free: 110 mm Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control: MAZATROL M-PLUS Dimensions & Weight Required space: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA Gjdpeymw Nhofx Af Teip The machine has been serviced regularly.

Condition: new, WMD45 - ROGI Drill Cutter Drilling capacity ----- 45 mm Spot milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Gsdpfx Aoga T Ansf Tjip Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tilt ----- Left / Right 90 Degrees Longitudinal displacement of the work table ----- 560 mm Transverse displacement of the worktable ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3F INCLUDED * Drill head with pin ISO30 - B16 * Left / Right switch * Spindle protection * Fine adjustment * 2 Speed motor * Driven wedge * Tap function * Digital depth stop * CE plug OPTIONS * Base cabinet * Router clamp * ISO30 router bit holder + 12 collets in case * Router set

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Machine weight: 3,500 kg EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Gijdpfx Afsymw Iqs Tep Hinged belt chip conveyor