Used Corrugator for sale (280)

Condition: used, Year of construction: 2000, The Stock A-14 V567A/1650P is a high-speed laminating machine designed specifically for the packaging industry. It integrates advanced technology to efficiently laminate various materials, providing enhanced durability and protection to packaging products Format: 1640 x 1640 mm Equipment: Lrsdpfx Ajwcqwxjl Ijn Feeder: Edge Feeder (MIRUS) Sheet feeder by carrier chains Press Station Speed: 3,000 cycles/h Control device: Siemens SPS-Control / Micro Control System Gluing Station Laminating Station Technical Details Size max: 1640 x 1640 mm Size min: 500 x 500 mm Sheet weight: Cardboard 100 - 800 g/qm Infeed height: 1,400 / 1,800 mm Carrier Sheets: one-sided corrugated board, E/B- and F-Flute, two-sided corrugated board up to 7 mm thickness cardboard from 0.5 mm thickness

Condition: new, overall weight: 39,000 kg, total width: 2,438 mm, total height: 2,670 mm, Year of construction: 2025, !!! NEW !!! WITHOUT PRE-CARRIAGE !!! Type: CIMC Longitudinal Swap Body Tank (CLS) Capacity: 35,000 liters Tare weight: 4,130 kg Operating pressure (max.): 3.0 bar Test pressure: 4.5 bar Temperature range: -40°C to +130°C Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC Shell: 1.4402 (316L), 3.2 mm, 2B finish Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished Baffles: 4× vertical, CVC-shaped, corrugated, 70% welded Internal finish: Degreased, pickled, passivated, neutralized Ladder: Stainless steel, right rear, theft-proof Catwalk: Aluminium, anti-slip, 475 mm, with cross-steps Handrail: Folding, telescopic, theft-proof Stacking: Up to 3 units Manhole: Ø500 mm, 316 stainless steel, 8-bolt, EPDM/PTFE Revision openings: 3× Ø300 mm, 316 stainless steel, 4-bolt Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with rupture disc & pressure gauge Air line: 1.5", with ball, safety & non-return valve, gauge accessible from below Vacuum valve: 2" BSP, -0.21 bar Bottom valve: 3", with remote cable closure Steam heating: 8 longitudinal runs, 1" BSP, 3 bar Thermometer: Analog, -40°C to +160°C Insulation: o 50 mm mineral wool (tank & ends) Lodpfjy Ebacsx Al Iern o PU foam under stainless steel straps Cladding: o Shell: 4× 1.8 mm GRP panels Markings: 3× holders for Edgar Weber flip boards, 1× Kemmler mounting bracket Interim sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important notice – Important information: Despite careful review of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute any legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information to initiate contractual negotiations. The information provided here is without guarantee and does not represent warranted characteristics.

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Machine appr. Weight: 23.600 KG Lrodpfev Rci Djx Al Ien Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: new, length in total / mm band width / mm conveying height / mm Control / Please complete the attached form and return it to us by email for quotation preparation. Hinged Belt Conveyors – Overview & Features General - Hinged belt conveyors can be manufactured according to purpose and dimensions. - The design and belt system are robust and durable, provided regular maintenance is carried out. - Most commonly used type of chip conveyor. Applications Transport of: - Long, coarse, corrugated, and crumbly chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for conveying chips from the production process. - Separation of cutting oil/coolant from the chips. Versions - Available with or without a tank for returning cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selected according to the amount of chips to be conveyed. Lrsdsymf Hnepfx Al Ion - Conveyor width, length, motor, and gearbox are matched to the hourly conveying capacity. - Coolant recycling is taken into account during the design. Control - Operation via control panel or CNC control of the machine tool. - Control via plug-in connection possible. Note: Images are for reference only and are not to scale.

Condition: used, Year of construction: 2010, We have here a KIRK-RUDY KR215 inkjet mailtable and a KIRK-RUDY KR435 mini tabber available. Inkjet mailatble is year 2008 and the mini tabber year 2011. KR215 Inkjet base description Feed and convey a wide variety of products using the KR 215. Used with most major brands of inkjet printing and pressure-sensitive labeling equipment, the KR 215 is the ideal feed and transport solution for your offline coding, addressing and labeling needs. The KR 215 is perfectly suited for handling all kinds of direct mail pieces as well as flat chipboard and corrugated cartons. A fully adjustable hopper quickly and easily adjusts for a full range of product sizes from single sheets to broadsheet newspapers. It’s “load from the top, feed from the bottom” design keeps jobs running non-stop. Lrsdpfx Aox Ag Tmol Ijn KR435 mini tabber: Product Specification The KR435 handles large 40cm diameter rolls and runs all major types of tabs as well as pressure sensitive stamps and labels of various shapes and sizes. Key features like side register belts, side to side top plate adjustment and automatic tab sensor setup keep the tabbing process consistent and reliable.

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used EMproject89 MS 1700 TWOCOL, year of manufacture 2020. Lredpfx Aoyz T H Hsl Ion Machine type: MS 1700 TWOCOL Serial number: 24/2020 Year of manufacture: 11/2020 Voltage: 220 V Rated power: 1.5 kW Suitable for flexographic printing, carton printing, corrugated board, and packaging. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,200 mm, total width: 3,400 mm, total length: 2,400 mm, overall weight: 4,500 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Technical characteristics: CAPACITY: up to 1200 boxes per hour PULLER SPEED: up to 3m/s INSTALLED POWER: 23 kW CARDBOARD TYPE: single, double and triple wall up to 14mm and 1400GSM in standard option and HD cardboard over 2000GSM per request. MAXIMUM BOARD SIZE: 2400mm X 7000mm MINIMUM BOARD SIZE: 200mm width x 650mm length DISTANCE BETWEEN SLOTTING KNIVES: 50mm – 2200mm (500mm segmented slotting knives) WIDTH OF SLOT: 8mm Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Lrodpjfivfyjfx Al Ion Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Gluing module unit x 1 -.. The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models in memory. Remote access and control. Additional modules: Flexo printer (one color 1000x870mm, integrated system), Second die-cut module, Vacuum feed table, Platform vacuum feeder (fully automatic system), Platform vacuum stacker (fully automatic system), HD cardboard upgrade (for cardboards up to 2200GSM). Additional tools: Creasing wheels, Double Creasing wheels (creasing line distance 10-50mm), Perforation knives (both axes), Part-cut knives for 7 layer cardboard (both axes), Diagonal creasing tool, Crusher-tool for glue flaps on 7 layer cardboard, Middle slotting knife (for multi-production of boxes). Warranty 60 months, provided training and support for services and parts.

Condition: excellent (used), Year of construction: 2024, operating hours: 992 h, functionality: fully functional, machine/vehicle number: 20240250, overall weight: 6,000 kg, For sale: BOXMATIC Manual 25 DCFM-D – a semi-automatic machine for producing regular corrugated cardboard folding boxes with cutting capabilities. It is an ideal solution for companies requiring flexible production of corrugated cardboard boxes with frequent order changes. Lredpfsy Tv N Iox Al Isn The BOXMATIC Manual 25 model is designed for the professional and efficient production of basic types of folding boxes, with the option of additional die-cutting (e.g., cutting hand holes, cross boxes), particularly FEFCO 02 and FEFCO 03 types made from single, double, or triple-wall corrugated cardboard. The machine can also produce dividers or simply score and cut the cardboard. The machine performs excellently in short and medium runs (10–5000 units), offering quick changeovers and a wide range of produced formats and FEFCO box types. Key advantages: - Cardboard handling: single, double, and triple-wall (2–12 mm) - Max. sheet width: 2500 mm - Output: 300–600 units/hour, up to 2300 units/hour in multi-product mode - Quick setup and production change (approx. 5–10 minutes) - Wide range of FEFCO box types - Flexographic printing and additional die-cutting options - Ideal for producing large formats - Excellent value for money Technical specifications: - Weight: approx. 6000 kg - Length: 3070 mm - Width: 2820 mm - Height: 1710 mm - Power supply: 400 V / 50 Hz - Power: 19 kW

Condition: used, functionality: fully functional, Year of construction: 2000, color: white, overall weight: 18,000 kg, empty load weight: 2,980 kg, loading space volume: 43 m³, loading space width: 2,460 mm, loading space length: 7,280 mm, loading space height: 2,440 mm, container length: 24 ft, machine/vehicle number: 7019846, BDF swap body swap body with portal doors!!! Length: 7.45 m            * Corrugated steel body      * Sturdy portal doors with external twist locks      Lodpfx Alsvyprws Iorn * Doors repaired, no rust! * Can be craned, stacked * Screen-printed floor, forklift accessible * Keyhole on the side wall * Support legs height adjustable, parking height 1.12 - 1.32 m * Also available with new paint or new support legs!!! * New UVV inspection on request! We always have large quantities of different manufacturers and designs for sale or RENT in stock!!! Rent from 5.85 euros per day! Delivery nationwide possible! All prices net plus VAT. Errors and prior sale reserved!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Lifting and traction suction unit for cutting, grooving, and perforating up to 6 mm cutting thickness. Suitable for paper, cardboard, corrugated board, and synthetic materials. Includes software and PC. Lredpfx Alstrty Io Ien

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Lrjdpfxjtqpd Ho Al Ien

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 Ljdpfx Aljxnbf Us Iorn - Fire resistance (DIN 53438): F1

Condition: used, Year of construction: 2012, Overview  This packaging machine for cups was built in 2012 by the German manufacturer Schubert. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details  Output: 270 cups/minute Format range Round cups D = 63 - 95 mm H = 35 - 125 mm 2 - chamber cup 86 x 86 mm 109 x 109 mm (square) 125 x 95 mm (oval) Type of packaging Primary packaging Cups in sleeves, then in trays and crates Format range, max. sleeve length flat blank: 450 mm Secondary packaging Trays and trays: Solid cardboard (trays) and corrugated cardboard Format range, flat cut: 200 x 400 mm - 600 x 800 mm Tray height = 15 - 55 mm Tray height = 35 - 100 mm Last used for Tray 24 Tray of 8 12 tray Control: Schubert via individual modules Weight: approx. 15 tons Further information, pictures and videos of the machine on request Lrodsvpd S Repfx Al Ijn

Condition: excellent (used), Year of construction: 2006, Introduction SUN No. 4 flexo colors from the bottom High Board Line (n. 2 printing units year 2006 - n. 2 printing units year 2016) Vacuum transfer among the groups with belt and panel system Lrodpfsy D Huvjx Al Isn HBL Transfer with vacuum transport year 2025 Max size 1200x1600 mm Available may 2027

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Lrjdjy D Ht Sjpfx Al Ien Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Max format: 102x142 cm Min format: 50x70 cm Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: excellent (used), Year of construction: 2020, operating hours: 2,450 h, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, type of input current: three-phase, cutting height (max.): 50 mm, Equipment: safety light barrier, ESKO Kongsberg X20 Light Sign (instalata in februarie 2020 si cu 2450 ore de functionare) - Working area 1680x1270 mm, - Incl. basic X20 starter table, felt cutting underlay, shipping crates, - FlexiHead with 3 insert positions, - 6kW vacuum pump, PC & iPC Sign Standard, camera. Lrodpfx Aljzdk Iwj Ion - Table mains 230V - Pump mains 3 x 380 V - iCut Production Console software Tools : - Basic Folding Carton Kit - Multi Purpose High Frequency(MP-HF) Knife Tool (for cutting corrugate cardboard) - Folding carton crease tool (15mm) incl crease wheels - Crease Tool (60 mm for creasing corrugate cardboard) - Psaligraphy knife tool, incl. 2x SR6150 and 2x SR6151 blades - Rigid Material Knife tool (for 8mm knife blades) - KissCutting Knife tool (incl 6x sign foil knife bl) - Incl 2 different pressure springs; - Incl 3xKC101+3xKC102 knife blades; - Removable&adjust.depth control cup; - Hand tool for knife blade change

Condition: new, empty load weight: 660 kg, maximum load weight: 1,340 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,550 mm, loading space height: 900 mm, loading space volume: 4.5 m³, color: silver, construction height: 1,620 mm, working width: 1,670 mm, E-hydraulics / leaf grid attachment / high front grid, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / leaf grid attachment / high front grid Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: * IMMEDIATELY AVAILABLE * - Gross vehicle weight: 2,000 kg - Unladen weight: 660 kg - Payload: 1,340 kg - Interior dimensions: 306 x 155 x 90 cm (L x W x H) - Overall exterior dimensions: 436 x 167 x 162 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70R13 steel rims - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Side walls: anodized aluminium double-walled, 4x foldable & removable - Side wall height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: Yes, 60cm swinging grid attachment, high grid at the front - Lashing eyes: 6 in the floor - Supports: at extra charge - Ramps: at extra charge Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - Removable front H-frame - E-hydraulics with battery - Sturdy welded steel frame - Completely hot-dip galvanized frame - Many options available hot-dip galvanized - many sturdy cross members for high point loading - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 6 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle - registration papers: COC papers Special equipment included in the price: - Original corrugated grille attachment all round, 60cm high, swinging, removable Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking bars - bar strip with rubber coating for tension belts & locking bars - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lodpeu Hr H Ijfx Al Isrn

Condition: new, empty load weight: 915 kg, maximum load weight: 2,085 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: black, construction height: 1,260 mm, working width: 1,930 mm, E-hydraulics / steel drop sides / emergency hand pump / full steel floor, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / steel drop sides / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 915 kg - Payload: 2,085 kg - Interior dimensions: 314 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 126 cm (L x W x H) - Loading sill height: 75 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: double-walled steel drop sides, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - STAHL drop sides anodized double-walled - Drop sides foldable at the side and rear - Drop sides removable - Tailgate also swingable - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available - Many options available - Many options available - Many options available. hot-dip galvanized - many stable cross members for high point loading - additional longitudinal struts welded in throughout - E-hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible Lredou Hr I Sepfx Al Isn

Condition: new, empty load weight: 950 kg, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,260 mm, working width: 1,930 mm, E-hydraulics / emergency hand pump / full steel floor, automatic reverse, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 950 kg - Payload: 2,550 kg - Interior dimensions: 314 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 126 cm (L x W x H) - Loading sill height: 76 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Drop sides can be removed - Rear flap can also be swivelled - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - electric hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - charger 230V - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and pri Ljdou Hr Niepfx Al Isrn

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,610 mm, loading space width: 1,850 mm, loading space height: 350 mm, loading space volume: 2.7 m³, color: silver, construction height: 1,180 mm, working width: 2,000 mm, steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. steel drop sides / e-hydraulics / emergency hand pump / parabolic suspension / full steel floor / charger Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 361 x 185 x 35 cm (L x W x H) - Overall exterior dimensions: 514 x 200 x 118 cm (L x W x H) - Loading sill height: 72 cm - Tires: 185/70R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional! - incl. vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: solid steel drop sides, hot-dip galvanized, removable - Drop side height: 35 cm - Chassis: high loader, KNOTT parabolic spring axle - Tipping function: yes, three-sided - Hydraulics: electric & can be tipped with emergency hand pump - Tipping angle: approx. 45 / 47 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at an extra charge - Lashing eyes: 8. Ramps: at extra charge - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Hot-dip galvanized and reinforced solid steel drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Tailgate can also be swivelled - Solid steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - e-hydraulics for tipping with battery in the box and cover - built-in battery - integrated battery charger, and charge level indicator - emergency hand pump fitted - automatic reverse drive - parabolic spring axles (leaf spring suspension) - KNOTT overrun device and parking brake - ramp shaft as preparation for ramps - sturdy angle lever locks - very sturdy bolted V-drawbar STRENGTHENED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval - corrugated grille attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ledpfx Asu Hr Rtel Iern

Condition: new, empty load weight: 290 kg, maximum load weight: 1,210 kg, overall weight: 1,500 kg, loading space length: 2,300 mm, loading space width: 1,400 mm, loading space height: 300 mm, loading space volume: 1 m³, color: silver, construction height: 990 mm, working width: 1,540 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, Unbraked, Low chassis, Aluminium drop sides, * IMMEDIATELY AVAILABLE * incl. Low chassis, Aluminium drop sides Technical data: - Type: New vehicle - TÜV: New/2 years - Year of construction: 2020 - Availability: IMMEDIATELY! - Gross vehicle weight: 1500kg - Unladen weight: 290 kg - Payload: 1,210 kg - Interior dimensions: 230 x 140 x 30 cm (L x W x H) - Overall exterior dimensions: 354 x 154 x 99 cm (L x W x H) - Loading sill height: 69 cm - Tires: 195/50R13C steel rim - Brake: Yes - Support wheel: Yes, automatic - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 15mm - Drop sides: Anodized aluminium, double-walled - Drop side height: 30cm - Removable drop sides: Four walls can be folded down - Drop side hinges: 3 on the side / 2 at the front + rear - Removable corner stanchions: Yes - Chassis: High loader, rubber spring axle - Overrun device & brake: ALKO - Frame/chassis: V-drawbar - Attachment: at an extra charge - Locks: Tension locks - Lashing eyes: 4 pieces in side edge (400kg/dAN) - Net hooks: optional - Supports: at extra cost Supports: at extra cost - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Anodized double-walled aluminium drop sides - Rear & front drop sides foldable - All drop sides removable - Wooden floor - Corner stanchions with insertion option for attachments or grids - Maintenance-free rubber spring axles - Axle with continuous axle beam and independent wheel suspension - 4 lashing brackets inside the side edge - Tension locks - Sturdy V-drawbar - Maintenance-free rubber spring axle from ALKO - Automatic reverse drive - ALKO overrun hitch and parking brake - 13-pin plug - Reversing lights - Large reversing lights - Large rear lights - Rear lights - Rear lights - Large rear lights. plug - reversing lights - large safety lighting - lighting recessed in the rear frame - integrated rear fog light - 13-pin plug - automatic support wheel in the center - automatic rear fog light plug - automatic center support wheel - registration papers: vehicle registration document (ZBII) & COC papers Accessories can be retrofitted - please enquire: - Perforated railing on dropside - High front grille - High tarpaulin - Dropside attachment - Corrugated grille attachment 60cm - Spare wheel - Storage box - Rear supports - Ramps - Flat tarpaulin - Additional lashing eyes - Slot-and-hole rails for tension belts & locking bars - Rod strip with rubber coating for tension belts & locking bars - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ljdpfx Aju Skxgsl Isrn

Condition: new, empty load weight: 770 kg, maximum load weight: 2,730 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.9 m³, color: silver, construction height: 2,030 mm, working width: 2,300 mm, Automatic reverse drive, drive-on ramps, hot-dip galvanizing, swivelling rear ramps, 12 lashing eyes, * IMMEDIATELY AVAILABLE * incl. swivelling rear ramps / 12 lashing eyes / drive-on ramps Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 770 kg - Payload: 2,730 kg - Interior dimensions: 360 x 180 x 30 cm (L x W x H) - Overall exterior dimensions: 558 x 230 x 203 cm (LxWxH) - Loading sill height: 45 cm - Tyres: 185R14C steel rims - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 30 cm - Chassis: ALKO rubber spring axle - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 14 - Overrun device & brake: ALKO - Frame/chassis: welded, hot-dip galvanized steel frame - Attachment: at an extra charge Lashing eyes: 22 pieces laterally in the frame (2000kg/daN) - Supports: integrated in ramps - Ramps: 2x aluminum upright on shaft and swiveling - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Novelty with ramps that can be folded away to the side for loading with forklift frame - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm, continuous without joints, slip-resistant and waterproof - Hollow profile construction welded and completely hot-dip galvanized - Body made of sturdy steel side wall profiles - Reinforced, automatic jockey wheel, for safe parking of the loaded trailer, load capacity 500 kg, anti-slip grid covering and integrated support feet - Premium maneuvering handle with tensioning strap retractor - 12 pairs of load securing points with a load capacity of up to 2000 daN per lashing point - Frame completely hot-dip galvanized - 2 lashing points, completely welded in an immersion bath hot-dip galvanized - 2 fold-down and laterally adjustable aluminium ramps with integrated floor support, ramps can be swivelled to the side, with a load capacity of 3500 kg/pair - automatic reversing system - ALKO overrun device and parking brake - sturdy locks for ramps - 13-pin plug - reversing lights - large rear lights Plug - Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic center support wheel - Approval papers: ZBII and COC papers Special equipment included in the price: - Alu swivel ramps rear Accessories can be retrofitted - please enquire: - bucket storage - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - sheet metal attachment closed 60cm - spare wheel - storage box - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinx Ljdpfx Aou Hrkasl Isrn

Condition: new, empty load weight: 480 kg, maximum load weight: 1,020 kg, overall weight: 1,500 kg, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 300 mm, loading space volume: 1.2 m³, color: silver, construction height: 1,020 mm, working width: 1,670 mm, E-hydraulics / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / high front grille Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,500 kg - Unladen weight: 490 kg - Payload: 1,020 kg - Interior dimensions: 250 x 160 x 30 cm (L x W x H) - Overall exterior dimensions: 383 x 167 x 102 cm (L x W x H) - Loading sill height: 72 cm - Tyres: 185/70 R13C steel rim - Brake: yes - Support wheel: yes - Automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - incl. electric hydraulics Vehicle documents Vehicle superstructure: - Floor: sheet steel on wood, Finnish multiplex board - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 30cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: yes, reverse - Hydraulics: electrically tiltable - Tipping angle: approx. 45 - Steps hydraulic cylinder: 2 steps - Overrun device & brake: KNOTT - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: Yes, removable high grille at the front - Lashing eyes: 6 in the floor - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Drop sides removable - Steel plate on wooden floor in Finnish quality - H-frame removable at the front - E-hydraulics with battery - Sturdy welded steel frame - Frame compl. hot-dip galvanized - many sturdy cross beams therefore high point load - maintenance-free rubber spring axles - automatic reverse - overrun device and parking brake - 4 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - charger 230V - load securing net - anti-theft device with discus lock - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slot-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lsdeu Hr E Depfx Al Iern

Condition: new, empty load weight: 1,140 kg, maximum load weight: 2,360 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 350 mm, loading space volume: 3.4 m³, color: silver, construction height: 1,200 mm, working width: 2,210 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,140 kg - Payload: 2,360 kg - Interior dimensions: 426 x 204 x 35 cm (L x W x H) - Overall exterior dimensions: 575 x 221 x 120 cm (L x W x H) - Loading sill height: 78 cm - Tyres: 185R14C steel rims - Brake: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge Surcharge - Lashing eyes: 18 pieces per 1500kg - Supports: Surcharge - Ramps: Surcharge Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Ramp shaft with tensioning device under the loading area including folding license plate holder With maintenance support - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - Drop sides removable - Rear drop side mounted on pendulum bearings - Full steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available. Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - Spinlock® load securing system - 18 lashing pins mounted recessed in the steel floor, tensile force per lashing pin up to 1.500 kg - When recessed, the lashing pins can be used as a lashing option under the loading area with the aid of a belt loop - Electro-hydraulic pump - including integrated charger - Pumpless emergency pump incl. socket wrench insert - Automatic reverse - ALKO overrun device and parking brake - Sturdy tension locks - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Very sturdy V-drawbar - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Large reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with tensioning strap retractor - registration documents: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for o Lodju Hr Ryopfx Al Ijrn

Condition: new, empty load weight: 195 kg, maximum load weight: 555 kg, overall weight: 750 kg, loading space length: 2,050 mm, loading space width: 1,050 mm, loading space height: 650 mm, loading space volume: 1.6 m³, color: silver, construction height: 1,320 mm, working width: 1,550 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - Availability: Immediately!!! - TÜV: 3 years from first registration - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 750 kg - Unladen weight: 195 kg - Payload: 555 kg - Internal dimensions: 205 x 105 x 65 cm (L x W x H) - External dimensions: 306 x 155 x 132 cm (L x W x H) - Loading sill height: 50 cm - Tyres: 185/70R13 - Brakes: no - Support wheel: at extra charge - 100km/h: INCLUDED !!! - incl. vehicle documents (letter) Standard equipment: - Double-walled anodized aluminium drop sides 30 mm, with integrated aluminium frame - Drop side with load securing system Accessories such as lashing eyes can be easily mounted without drilling. - Stainless steel lashing rings (V2A stainless steel) - Sturdy screen-printed floor plate, non-slip (birch wood, waterproof glued) - Very sturdy locks for the tailgate made of V2A stainless steel (unique) - Maintenance-free, hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate can be easily removed - 13-pin plug - Reversing lights - Large reversing light - Steel mudguards plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - fitted with balanced 1A brand tires as standard - M8 stainless steel (V2A stainless steel) screw connection - clear operating sign with the most important data (tire pressure, cable assignment...) - incl. transfer costs - incl. vehicle registration document Special equipment included in the price: - Side wall height 60 cm + cover height Sturdy aluminum cover with aluminum corrugated cover plate accessible Sturdy cover railing Indestructible cover closure with discus lock Cover is easily removable 2 x gas springs for easy opening and closing - Cross racks for bicycle carriers, surfboards and similar are available on request. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! For more than 30 years we are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialized dealer & repair workshop - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Lrjdpfx Aju Hr Skjl Ien