Used Cork for sale (145)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Cjdjxyungjpfx Ac Terg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Codpfxjv Iq Ezj Ac Terg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Crsdpfxjwnr A Ho Ac Teg Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Crodpfx Aceyug Rqj Teg Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 12,000 rpm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis Credpsw Nyciofx Ac Tjg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, grinding spindle speed: 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Crodpfow Nyc Asx Ac Teg Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Codpfew Nyfwex Ac Tsrg Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 19973, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, overall weight: 320 kg, belt width: 50 mm, grinding belt length: 4,300 mm, Equipment: rotational speed infinitely variable, ✨ 2010 Ciclope Altair 4-2V AP Polishing Machine – For Sale in Ireland (Very Good Condition) Now available in very good condition, this 2010 Ciclope Altair 4-2V AP Polishing Machine offers high-performance surface finishing for demanding metal fabrication environments. Known for precision, durability, and efficiency, this Italian-made industrial polishing system is ideal for stainless steel, aluminium, brass, and a wide range of non-ferrous materials. Whether you're polishing flat plates, tubes, or complex components, the Altair 4-2V AP delivers consistent, high-quality results – perfect for decorative and technical metal finishing. ✅ Key Features – Ciclope Altair 4-2V AP (2010) Year of Manufacture: 2010 Condition: Very Good – Fully tested and operational Model: Altair 4-2V AP Polishing Heads: 1 (Variable Speed) Head Type: Vertical polishing unit with pressure control Motor Power: 3 kW Belt Length: 4300mm Belt Width: 50mm Belt Speeds: 600 to 3000rpm Machine Weight: 320kg Variable Speed Drive (2V): Fine control of polishing intensity Automatic Pressure Control (AP): Consistent contact and finish Application: Surface preparation, finishing, and mirror polishing Build: Heavy-duty welded steel frame with vibration damping Operator Panel: Ergonomic control panel with emergency stop Dust Extraction Ports: Integrated system compatibility 🧰 Applications Sheet metal finishing Tube polishing and deburring Stainless steel and aluminium decorative polishing Precision finishing of architectural and structural components Mirror finishing for high-end applications 📦 Machine Includes Altair 4-2V AP polishing machine base unit Single polishing head with pressure adjustment Electrical control panel Belt mounting system CE-marked safety systems 📍 Located in Ireland – Ready for Immediate Sale This machine is in stock in Ireland, and available for immediate viewing and dispatch. We provide shipping across Ireland, UK, and Europe. 📞 Contact Us Today Looking for reliable and efficient metal polishing equipment? This Ciclope Altair 4-2V AP is a powerful and cost-effective choice for your workshop or production line. Csdpewqrgkefx Ac Tjrg Ciclope Altair 4-2V AP Polishing Machine for sale Used Ciclope metal polishing machine Ireland Industrial surface finishing equipment Automatic polishing machine for stainless steel Variable speed polishing machine for metal Sheet and tube polishing system Italian metal polishing equipment in Ireland Metal finishing machine for aluminium and brass Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 22675, type of input current: three-phase, input voltage: 400 V, disc diameter: 300 mm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 600 rpm, overall weight: 410 kg, spindle diameter: 25 mm, wheel diameter: 300 mm, wheel width: 50 mm, Equipment: double-sided, rotational speed infinitely variable, ✨ 2016 Ciclope DBC 400/2-MV Double Ended Polishing Machine – For Sale in Ireland (Very Good Condition) Enhance your metal finishing capabilities with this high-quality Ciclope DBC 400/2-MV Double Ended Polishing Machine, manufactured in 2016 and currently available in very good condition. Built in Italy, Ciclope machines are trusted by professionals across the metal fabrication and surface finishing industries for their durability, precision, and powerful performance. This robust double-ended polishing system is ideal for stainless steel, aluminium, brass, and other metal components. Whether you're polishing flat parts, round tubes, or intricate shapes, the DBC 400/2-MV delivers consistent, high-speed results with minimal vibration and excellent control. ✅ Key Features – Ciclope DBC 400/2-MV (2016) Year of Manufacture: 2016 Condition: Very Good – Fully operational Type: Double-ended polishing machine Motor Power: 2 x 3 kW (per side) Polishing Wheel Diameter: 300 mm Polishing Wheel Width: 50 mm Spindle Diameter: 25mm Spindle Length: 110mm Spindle Speeds: 600 to 3600rpm Spindle Speed: Variable (MV = motovariator model for adjustable speed) Electrical Connection: 3ph/400V/50Hz Machine Weight: 410kg Workpiece Compatibility: Flat and round components, small to medium size Construction: Heavy-duty cast iron base for stability Integrated Tool Rests and Safety Guards Brake: Electronic Brakes and Stop Pedals Electrical Controls: 24V CE certified, user-friendly panel 🧰 Machine Applications High-speed surface finishing of stainless steel and non-ferrous metals Pre-polishing, mirror polishing, or deburring Ideal for fabrication shops, decorative finishing, and precision engineering Dual-head configuration increases throughput and flexibility 📦 Included in Sale Ciclope DBC 400/2-MV polishing unit 2 x polishing spindles with guards Adjustable tool rests Control cabinet and safety system Ready for use in workshop or production line 📍 Available Now in Ireland Located in Ireland, this machine is in stock and available for immediate inspection and delivery. We provide nationwide shipping, with options for UK and European delivery upon request. Crsdswqrltspfx Ac Tjg 📞 Enquire Now Don’t miss this opportunity to own a premium Italian-made polishing machine in excellent working condition. Perfect for professionals who demand reliability and a high-quality finish. Ciclope DBC 400/2-MV for sale in Ireland Double ended polishing machine used Industrial metal polishing machine Ireland Surface finishing equipment for stainless steel Polishing machine with variable speed control Used Ciclope metal polishing machine Heavy-duty polishing grinder for aluminium and brass Mirror finish polishing machine Ireland / UK / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Cjdpfex Ddagjx Ac Tsrg Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Max Turning Length: 1285 mm Center Height: • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Cjdpfswv Sx Rox Ac Torg Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: S2T238, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 42 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7,500 W, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, feed length X-axis: 180 mm, feed length Z-axis: 1,000 mm, quill travel distance: 110 mm, quill diameter: 42 mm, quill stroke: 110 mm, swing diameter over cross slide: 210 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, swing diameter over bed slide: 330 mm, bar passage: 42 mm, spindle nose: D1-4, center height: 167 mm, bar diameter (max.): 42 mm, travel distance cross slide: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 🔹 For Sale: 2003 Harrison Alpha 1330S CNC / Manual Lathe – 2-Axis, Fanuc Control 🔹 Make: Harrison Model: Alpha 1330S Year: 2003 Type: CNC / Manual Combination Lathe Control: Fanuc Series 21i-MB Condition: Very Good Location: Ireland 📌 Machine Overview: The Harrison Alpha 1330S is a versatile 2-axis CNC/Manual lathe, offering the perfect balance between traditional manual turning and modern CNC precision. Built in the UK and controlled via a Fanuc 21i-MB, this machine is ideal for small batch production, toolrooms, maintenance departments, and educational use. With a compact footprint and generous turning capacity, it’s a reliable and easy-to-use solution for both skilled machinists and CNC programmers. Whether you're running single parts manually or repeat jobs with CNC automation, the Alpha 1330S delivers flexibility and accuracy. ✅ Key Features: Combination CNC/manual functionality Compact, easy-to-install design Fanuc 21i-MB control – intuitive and reliable Cjdpfjwtq T Iex Ac Tsrg Dual spindle speed ranges for versatile applications Suitable for one-offs, training, and batch work Quickchange tool post system for rapid setups Comprehensive manuals included 🔧 Technical Specifications: Axis Configuration: 2-Axis Max Turning Diameter: 330 mm Max Turning Length: 1,000 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 210 mm Height of Centres: 167 mm Spindle Bore: 42 mm Spindle Nose: D1-4 Spindle Taper: MT3 Spindle Speed Ranges: Range 1: 0 – 2,000 rpm Range 2: 0 – 3,500 rpm Main Spindle Motor: 7.5 kW Feedrate (Manual): 0.03 to 0.6 mm/rev Feedrate (CNC): Up to 5,750 mm/min Rapid Traverse: X Axis: 3,000 mm/min Z Axis: 6,000 mm/min Cross Slide Travel: 180 mm Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT3 Electrical Requirements: 415V / 3-phase / 50Hz Power Supply Needed: 19 kVA 🧰 Included Accessories: Quickchange Tool Post & Tool Holders Set of Manuals 📈 Applications: General Turning Prototyping Educational Training Repair & Maintenance Work Toolroom Operations Short Batch CNC Machining Harrison Alpha 1330S for Sale CNC Manual Lathe with Fanuc Control Used CNC Lathe Ireland 2-Axis CNC Lathe for Sale Combination CNC and Manual Lathe Harrison Alpha Lathe with Fanuc 21i-MB Precision CNC Lathe for Small Batch Work Used Harrison Alpha 1330S UK / Ireland Educational CNC Lathe with Manual Option Compact CNC Lathe for Toolroom Used CNC Lathe for Sale in Ireland CNC Machinery Dublin / Cork / Galway Buy Harrison Alpha Lathe Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, 🔧 Multivac Semi-Automated Blister Packaging Line (2021 – Unused) Complete Medical Device Packaging System – Fully Stainless Steel Available now at Used Machine Tools Ireland Ltd, this Multivac semi-automated packaging line is in as-new condition, originally installed in 2021 at a medical device facility but never used. This is a high-spec, turnkey blister packaging solution, ideal for medical, pharmaceutical, food and high-spec manufacturing environments requiring cleanroom-compatible, stainless steel equipment. This Multivac semi-automated blister packaging line (2021) includes dual T700 tray sealers, MR625 labelling system, robotic handling modules, inspection stations, and full conveyor system, designed for medical-grade blister packaging in stainless steel environments. Suitable for 150–180mm blister packs with double sealing process. 🚀 Key Highlights ✔️ As new – never used (2021 installation) ✔️ Full stainless steel construction – medical grade ✔️ Complete automated blister packaging line ✔️ Dual Multivac T700 tray sealers ✔️ Integrated labelling, inspection & robotic handling ✔️ Designed for precision medical device packaging ✔️ Includes large quantity of spare parts & tooling ⚙️ Packaging Process Overview This line is designed for high-efficiency double blister packaging: 4-place carrier tray automatically loaded with empty blister packs Manual filling of blister packs with product Tray moves to Multivac T700 Sealer #1 Automatic sealing + labelling via Multivac MR625 Cross Web Labeller Small blister packs are automatically transferred into larger blister packs (double pack) using a Multivac H242 Robotic Handler (double pack) Packs placed into 2-place carrier tray Tray moves to Multivac T700 Sealer #2 for final sealing Finished trays move to manual unloading & boxing stations via a Multivac H242 Robotic Handler Three inspection stages ensure quality control 📦 Product Size Capability Blister Pack Sizes: 150 x 150 x 70mm 180 x 180 x 80mm 🏭 Full Equipment List 🔹 Multivac Equipment 2 x Multivac T700 Automatic Tray Sealers Codpfxeyzf Uco Ac Tjrg High-performance automatic tray sealing system 1 x Multivac MR625 / MR6318 Cross Web Labeller Fully automatic cross web labelling 2 x Multivac H242 Robotic Handling Modules Automated product transfer High-speed pick & place functionality Designed for integration with packaging lines 2 x Multivac MTD351 Tray Denesters Automatic tray separation and feeding Reliable high-speed tray handling 🔹 ASYS Tecton Automation Equipment 2 x ASYS Tecton Tray Stackers 1 x Horizontal Tray Stacker (6 x 5 carriers) 1 x Horizontal Tray Stacker (4 x 5 carriers) 3 x ASYS Tecton Inspection Stations 🔹 Additional Equipment 23 x Conveyor Sections (various lengths) Multiple HMI Control Panels throughout line 13 x Stainless Steel Handling Trolleys Extensive spare parts package included 💡 Typical Applications Medical device blister packaging Pharmaceutical packaging lines Cleanroom packaging systems Double blister / sterile barrier packaging High-spec manufacturing environments 📦 Condition Installed 2021 Never used – as new condition Fully maintained & preserved Now dismantled - videos of line in operation are available Note: Specifications and information provided in each listing are supplied in good faith; however, their accuracy cannot be guaranteed. Some tables in the videos/photos are not included No printers are included

Condition: used, Year of construction: 2010, machine/vehicle number: GA25, Used ROBINO & GALANDRINO WIREHOODER 14000 BPH - Year 2010Technical Specifications & Performance DataThe Robino & Galandrino RECORD 14000 is a high-performance wire-hooding machine engineered for consistent and precise application of wirehoods on glass bottles. Built in 2010, this second hand unit has been maintained in working condition and is well-suited to upgrade an existing used bottling line or expand industrial packaging capacity in beverage production. Its robust design and dependable mechanics enable stable, continuous operation at elevated speeds typical of modern bottling equipment.Machine Type: WirehooderManufacturer: Robino & GalandrinoModel: RECORD 14000Year of manufacture: 2010Production speed: up to 14,000 bottles/hourContainer types: Designed for Glass bottle handlingApplication: Wirehood application for sparkling beveragesElectrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current (In): 4.15 AProtection (ICC): 20 AWiring diagram code: REC262Certification: CEAdvanced Automation & Control SystemsThe machine integrates an industrial electrical system referenced by wiring diagram code REC262 and operates on a 400 V 3-phase, 50 Hz supply. Designed with CE-compliant safeguards, the wirehooder supports reliable, repeatable performance with consistent wirehood placement and twist integrity. Safety interlocks and emergency-stop circuitry help protect operators during operation and changeovers. The unit’s design facilitates quick adjustments for bottle handling components, simplifying setup across compatible formats and maintaining high uptime on a modern packaging line.Production Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of corking and upstream of labeling within a glass bottling line. It is compatible with standard conveyor interfaces and can be synchronized with upstream and downstream equipment such as corkers, foil applicators, labeling machines, and secondary packaging systems. The RECORD 14000 supports continuous in-line operation or can be configured as a standalone station with appropriate infeed and outfeed conveyors. Its performance profile and interface flexibility make it an effective addition to beverage production lines focused on sparkling products packaged in glass bottles.Machine Condition & Maintenance HistoryThe unit remained in production until the end of March 2026 and is currently in working condition. It has been inspected, cleaned, and lubricated, demonstrating careful upkeep consistent with efficient line operation. The machine is available immediately, enabling rapid deployment and minimal downtime for facilities seeking to augment capacity or replace an older wire-hooding station.Operational Performance & VersatilityEngineered by Robino & Galandrino, the RECORD 14000 delivers high-speed wirehood application with stable bottle handling and consistent twist quality. Its construction supports sustaine... Cedpfxjzvprlo Ac Tjrg

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. Csdpfx Aow Imp Hoc Terg It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 Crjdpfx Aozqhdioc Teg * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Year of construction: 2015, condition: excellent (used), Spectra-Physics Spirit Dual Frequency Femtosecond Laser High Q Laser GmbH p/n: 06900 fR Rack LCR1 Used, device is in very good condition. Removed from "blue chip" pharma company in Cork, IE. Sold as seen Crsdpfx Acoym Dtao Tsg

Condition: excellent (used), Year of construction: 2016, ELOPAK Shikoku S-PS60EC Carton Filling Machine Year: 2016 The ELOPAK Shikoku S-PS60EC is a reliable, industrial-grade carton filling machine designed for the forming, filling, and sealing of gable-top cartons for liquid food products. Manufactured by Elopak in cooperation with Shikoku Kakoki, this machine reflects the proven engineering and hygiene standards for which both companies are globally recognized. Key Capabilities: -Gable-top carton forming, filling, and sealing in a single integrated system -Suitable for liquid products such as milk, juices, water, and other chilled beverages -Designed for medium-to-high output production, typically up to ~6,000 cartons per hour (depending on configuration and carton size) -Compatible with common carton volumes, generally ranging from 250 ml to 1,000 ml -Blank-fed operation with precise carton forming prior to filling -Hygienic & Robust Design The S-PS60EC is built for food-grade production environments, featuring: -Stainless steel construction in product contact areas -Hygienic design suitable for dairy and beverage applications Crodpfxeyxgxke Ac Tsg -Automated filling accuracy and consistent sealing quality -Designed for clean-in-place (CIP) integration, depending on configuration Cartoning Machine is located at former dairy in the South of Ireland. The machine is still on location and viewing can be arranged. The site is reachable by Shannon International Airport & Cork International Airport. Contact for more information.

Condition: like new (used), functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 2,960 rpm, type of input current: AC, ATB Nordenham ATEX Rated 45kW Motor Credpfx Aoyq Sf Soc Tsg Type: CD 225M-2 New, unused, ex stores stock

Condition: new, CP Pump Systems Stainless Steel Mag Drive Chemical Process Pump Type: MKP 50-32-250 Complete with ABB M3KP 180 MLA EX proof Motor 22kW Mag. 93Nm Q. 16 m³/h H. 75m n. 2950 min Codsym Anvjpfx Ac Tjrg IMP. 240 mm New, unused, ex stores stock

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing P/N: 5052164040 Diameter: 16"x4 Crsdpfxjyq Ryhj Ac Tsg Volume: 191L Year: 2015 Pressure PS: 0-8 Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up

Year of construction: 2007, condition: ready for operation (used), A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible. Crjdpfovur Htex Ac Tjg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2107308, controller model: Elgo P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 13 mm, The machine was only in use for 3 years! The original price was €52,000! TECHNICAL DETAILS Working width: 3,100 mm Cutting angle (min.): 0.5° Cutting angle (max.): 3° Stroke rate (min.): 8 strokes/min Stroke rate (max.): 20 strokes/min Sheet thickness (max.): 13 mm Aluminum sheet thickness (max.): 10 mm Steel sheet thickness (max.): 13 mm Stainless steel sheet thickness (max.): 8 mm Back gauge adjustment: CNC controlled Back gauge: 1,000 mm Crsdpfjydc Nbsx Ac Tjg MACHINE DETAILS Control: Elgo P40T Dimensions & Weight Total weight: 12,000 kg Dimensions (L x W x H): 4,000 x 2,200 x 2,100 mm Power: 22 kW Input voltage: 400 V Input current: 45 A Input frequency: 50 Hz Type of input current: Three-phase EQUIPMENT CE marking Finger guard Foot remote control Emergency stop button Safety light curtain

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2108338, functionality: fully functional, stroke length: 210 mm, throat depth: 410 mm, working width: 3,700 mm, bending force (max.): 175 t, distance between stands: 3,200 mm, The machine was in use for only 3 years! The original price was €95,000! TECHNICAL DETAILS Bending force: 175 t Working width: 3,700 mm Stroke: 210 mm Throat depth: 410 mm Distance between columns: 3,200 mm X-axis travel: 750 mm Operating speed: 10 mm/s Return speed: 130 mm/s Number of axes: 4 Type of crowning: Motorized Backgauge adjustment: CNC-controlled Backgauge: 750 mm MACHINE DETAILS Control system: ESA S660W Dimensions & Weight Dimensions (L x W x H): 5,305 x 2,430 x 2,840 mm Crodpeydc H Tofx Ac Tjg Total weight: 9,800 kg Power: 15 kW (20.39 HP) Input voltage: 400 V Input current: 30 A Input frequency: 50 Hz EQUIPMENT CE marking Finger guard Foot remote control Emergency stop switch Upper tool Lower tool Safety light curtain European tool clamping system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Crjdpfxoypayue Ac Tjg X-axis travel: 8,500 mm Y-axis travel: 400 mm Z-axis travel: 95 mm A-axis: Spindle rotation A1-axis: Tailstock rotation V-axis: Bar support on processing line (90 mm) W-axis: Workpiece support relief (85 mm) X1-axis: Tailstock travel (610 mm) Laser power: 2,500 W Max. tube diameter: 140 mm Max. tube length: 8,500 mm Square tube: 12–120 mm side length Table length: 8,500 mm Working length: 8,500 mm Max. bar length: 8,500 mm Max. total bar weight: 130 kg (15 kg/m) Workpiece total load (max.): 4,000 kg MACHINE DETAILS Control: Sinumerik 840D Laser type: CO laser Laser source model: Rofin DC 025 Input power type: Three-phase Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 17,536 x 4,604 x 2,237 mm Total weight: 10,000 kg Operating hours: 22,500 h EQUIPMENT CE marking Documentation/manual Chiller unit Dust extraction Cutting head: Autofocus with capacitive sensor and collision protection Automatic bundle loader with alignment, measuring, and separation system Scimitar tube transfer system CNC-controlled tube support system with 5 active support units Intelligent part ejection with conveyor belt for short pieces up to 300 mm Fume extraction: 2,000 m³/h with high-performance filtration system Cooling: MTA TAE 121 chiller, 260-liter cooling circuit Hydraulics: 25-liter tank, 25 l/min pump, 70 bar system pressure