Used Cork for sale (152)

Condition: used, Year of construction: 1997, Overview  This ZALKIN capsule feeder (type ECT) was produced in 1997 by the French manufacturer Zalkin. The machine was part of a bottling line with a capacity of 12,000 bottles per hour and was used to feed natural cork closures. The machine has been idle since production stopped in 2022 and is available immediately. Truck loading is included in the offer. Technical details  - Output: 12,000 bottles per hour - Application: Feeding of cork capsules, Ø 28 mm - Bottle format: 750 ml cider bottles (glass) Dcsdpjw Elvbjfx Aa Hjl

Condition: used, Year of construction: 2020, Overview  This complete bottling line was last used for bottling spirits and includes a rinser filler combo with capper for t cork, conveyor belts, carton erector and sealer. The line achieves a maximum output of 2,000 bottles per hour, depending on the bottle volume and product. As production volumes are increasing, the seller has received a new line with higher capacity. To present the line in decent condition, the seller has installed it in the ware house. Technical details  - Output: 2,000 bottles/hour - Different bottle shapes possible as the height and width can be adjusted - Bottle volumes from 0,5l to 3,0l are possible Dcedpfxewqpkaj Aa Hel - Last used for: Spirits, can also be used for other liquids Scope of delivery  - Project AE PRORINS2000 Linear rinser with speed up to 2,000 bph (2020) - Project AE PROFILL2000 Linear filler with 10 electrically controlled filling valvesc(2021) - Borelli Capper for T-cork - Conveyor belts - Lantech C-300 carton erector (2021)

Condition: used, Year of construction: 2002, Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  - Capacity: 44,000 bph (500 ml glass bottles) - Formats: 500 ml glass bottles Dcjdpfxswif Dge Aa Hol - Filling principle: Isobaric (mechanical filling system) - Number of filling stations: 144 - Crowner: 24 stations (crown cork) - Operating voltage: 400 V - Frequency: 50 Hz - Control system: Siemens S7-400 - Control cabinet: Air-conditioned, stainless steel - Operating hours: approx. 30,000 (as of Nov. 2024) - Direction: Left to right Scope of Delivery - Filler: KHS Innofill DMG SVF 144-KK24 - Crown corker with 24 stations - Control cabinet and operator panel - Bottle clamping star wheels - CIP cups - High-pressure injection (HDE) - Bottle shower at discharge - Bottle table in roof optic - Central lubrication system - VPN remote access capability - Safety housing (updated in 2016, with flushing system) - Touch panel - Cork feeding unit by NSM - Filling level inspection system: Krones Checkmat (2015)

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  - Capacity: 9,000 bph to 12,000 bph - Formats: Cork caps for cider and champagne glass bottles (75cl) - Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Dcsdpfx Aswhk Dvoa Hel - Wirehooder - Operator platforms

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Dcodpfxov Aag Dj Aa Hol Technical details  - Working direction: left to right - Capacity: - 0,187ml - 4500bph 4°C & 15°C - 0,375ml - 4500bph 4°C & 15°C - 0,750ml - 4000bph 4°C &  2900bph 15°C - 1500ml - 2000bph 4°C & 1500bph 15°C - Currently set up for: - Glass Bottles: - 0,187ml - 0,375ml - 0,750ml - 1500ml  - Caps/Corks - Cork (boucheuse liège) - Screw cap - Decorative Cap (Champagne style) - Incl. CIP and wine filtration

Condition: used, Year of construction: 2016, Overview Dcodpovy D Adjfx Aa Hjl This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork - Complete documentation available

Condition: used, Year of construction: 2018, Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Djdpevpi Abefx Aa Hecl - Output: 4,000 bottles/hour (for 0.33-liter bottles) - Type of closure: 26 mm crown cork - Formats: 0.33L - Filling stations: 18 - Electrical specifications: - Max. Voltage: 208-240 V - Total current draw: 38.5 A - Maximum motor current: 10.6 A - Phase: 3-phase - Frequency: 60 Hz

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Dcedol Hx Rpopfx Aa Hjl

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Dcsdezlqnyopfx Aa Hjl Jet head's were removed from process in 2023 and kept as spares. In good condition. We have up to 8 of these available. Contact us for more information

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Rams: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary Dcjdpfxezi Hchj Aa Hel The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. Djdpfoziu Hzsx Aa Hjcl With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Dsdpfozx Dmpsx Aa Hocl Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: used, Year of construction: 2004, machine/vehicle number: PMPM000167, for Sparkling wine, wine and other beverages with CO2 Sekt, Wein und andere Getränke mit CO2. Rinsing Machine NOVA 20/1050 Dcodozx A Thepfx Aa Hol Counterpressure filler ELETTRA 1400/23 with 28 filling valves Capper-cork Machine DELTA 804 Eletrical Panel Pre-evacuation Pump Bottle format parts 375ml to 1500ml

Condition: used, Year of construction: 2011, Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Djdpfxjyb Sile Aa Hocl Technical data - Application: Beer and other carbonated beverages - Capacity: 6,000 bph - Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) - Ring Bowl Diameter: 960 mm - Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) - Pitch: 125 mm - Operating Hours: 7,200 h

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Dcjdpfxjzdak As Aa Hsl Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, machine/vehicle number: LC534, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) Dcedpfxevxz Ale Aa Hel In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles. Drying Tunnel CAMES TNN1 (2001) The drying tunnel blows high-efficiency air over the bottles, thoroughly drying them before they move to the next production step. Thus, this step ensures that the bottles are ready for labeling and packaging. Capsule Distribution and Application Capsule Distributor NORTAN (1997) The distributor feeds capsules continuously to the capsuling machine, thereby minimizing dow...

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20186/2006/01, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 325 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 7,200 mm, feed length Y-axis: 480 mm, feed length Z-axis: 325 mm, controller manufacturer: Elumatec, workpiece length (max.): 7,200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2006 Elumatec SBZ 130 Profile Machining Centre – High-Performance Aluminium CNC Machine 📍 Location: Ireland 🛠️ Machine Type: 3-Axis CNC Profile Machining Centre 📅 Year of Manufacture: 2006 ✅ Condition: Very Good / Fully Operational 🔧 Brand: Elumatec – German Engineering Excellence 🔧 Machine Description: The Elumatec SBZ 130 is a high-precision CNC profile machining centre designed for efficient and versatile processing of aluminium, steel, and stainless steel profiles. With fully automatic 3-axis control and flexible machining capabilities, it's ideal for manufacturers in the window, door, façade, and industrial profile fabrication sectors. 🧰 Included Features & Equipment: Automatic Tool Turret with 8 Tool Positions • Holds standard tools or angle milling heads • Rapid rotation ensures minimal tool change times 2 x Angle Milling Heads – included for advanced profile cutting Automatic Length Measurement – improves precision and workflow Two Independent Machining Zones – for pendulum operation and non-stop production Tool Spindle with Additional Axis Functionality – enhances machining flexibility All Operations Performed with Stationary Profile Bar • Protects profile surface during milling, drilling, and threading Multi-position Pneumatic Clamping System Coolant & Minimum Quantity Lubrication System (MQL) Tool Holders in photos Included This 2006 model is in very good condition, fully functional, and ready to be put into service. 📐 Technical Specifications: X-axis Travel (Longitudinal): 7,200 mm Y-axis Travel (Transverse): 480 mm Z-axis Travel (Vertical): 325 mm Spindle Power: 5.5 kW Max Spindle Speed: 6,000 rpm X Axis Rapid Traverse: 60 m/min Y Axis Rapid Traverse: 30 m/min Z Axis Rapid Traverse: 30 m/min Tool Changer: Automatic 8 position magazine Angle Milling Heads: 2 Angle Milling Heads Speed: 10,000 rpm Control System: Elumatec ELMU with full NC control Machining Capabilities: • Drilling, Routing, Tapping, Notching, Slotting • Machining on 3 sides of the profile without repositioning Clamping System: Pneumatic profile clamps (movable and programmable) Compressed Air Connection: 7 Bar Compressed Air Consumption: 75 L/min with spraying Cooling/Lubrication: Minimum quantity lubrication (MQL) system Operation: Front-loading with safety light curtain 🧰 Machine Includes: Multi-position automatic tool changer Angle Milling Heads x 2 Pneumatic profile clamping system Cooling/lubrication system Operator control console Selection of tool holders as seen in photos 💡 Key Features & Benefits: German-built machine with exceptional reliability High-speed 3-axis control for complex machining tasks Machining without profile repositioning – improved productivity Perfect for aluminium window & door fabrication, curtain wall profiles, industrial extrusion machining Can be integrated into automated production lines Ready to work – tested Elumatec SBZ 130 for sale Dsdpfxewwau Ns Aa Hscl used Elumatec machining centre CNC aluminium profile machining centre 3 axis profile router, aluminium window door CNC machine Elumatec CNC machine Ireland CNC notching machine used façade profile machine high-speed CNC profile mill Elumatec SBZ CNC profile router Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 918106, turning diameter over cross slide: 500 mm, turning length: 560 mm, turning diameter: 420 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,260 mm, total length: 3,430 mm, total width: 1,810 mm, feed length X-axis: 230 mm, feed length Y-axis: 110 mm, feed length Z-axis: 600 mm, swing diameter over cross slide: 500 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning diameter over bed slide: 650 mm, workpiece weight (max.): 230 kg, turning diameter over top slide: 500 mm, type of input current: three-phase, torque: 287 Nm, overall weight: 5,800 kg, swing diameter over bed slide: 650 mm, bar passage: 65 mm, chuck outer diameter: 250 mm, center width: 560 mm, spindle nose: A2-8, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, 🔹 FOR SALE: 2006 Goodway GS-260MYS CNC Lathe – Very Good Condition – Ireland 🔹 Make: Goodway Model: GS-260MYS Year: 2006 Control: Fanuc Series 18i-TB Machine Type: CNC Turning Centre with Sub Spindle, Driven Tools, Y Axis & C Axis Condition: Very Good Location: Ireland Availability: Immediately available 📌 Description: For sale is a 2006 Goodway GS-260MYS CNC Lathe, a powerful multi-axis CNC turning centre equipped with live tooling, Y-axis milling, and a sub spindle. This robust machine is ideal for complex turning and milling operations in a single setup — perfect for modern precision engineering environments. Maintained in very good working condition, it includes a selection of manual and driven tool holders, 2 chucks, and a swarf conveyor. 🔧 Technical Specifications: Main Spindle: Chuck Size: 10" (250 mm) Bar Capacity: 65 mm Spindle Nose: A2-8 Max Swing: 650 mm Swing Over Saddle: 500 mm Max Turning Diameter: 420 mm Standard Turning Diameter: 205 mm Max Turning Length: 560 mm Max Part Weight: 230 kg Hole Through Drawtube: 65.5 mm Hole Through Spindle: 76 mm Spindle Drive: Direct Belt Drive Spindle Speeds: 40 – 4,000 rpm Continuous Spindle Motor: 11 kW 30-Min Spindle Motor: 15 kW Spindle Torque (Cont.): 210 Nm Spindle Torque (30 Min): 287 Nm Axes: X Axis Travel: 230 mm Z Axis Travel: 600 mm Y Axis Travel: ±55 mm X/Z Rapid Traverse: 20 m/min Z2 Axis Travel (Sub Spindle): 600 mm Z2 Rapid Traverse: 24 m/min Tooling: Turret Stations: 12 OD Tool Shank Size: 25 mm ID Tool Shank Size: Up to 40 mm Live Tooling Stations: 12 Live Tool Drive Motor: 4.5 kW Live Tool Torque: 22 Nm Sub Spindle: Chuck Size: 6" Spindle Nose: A2-5 Hole Through Spindle: 46 mm Continuous Motor Output: 5.5 kW 30-Min Motor Output: 7.5 kW Spindle Speed Range: 60 – 6,000 rpm Drive: Built-in Motor Construction: Slideways: Hardened & Ground Box Ways Dcjdpfxewtpdfs Aa Hsl Machine Dimensions: 3430 x 1810 x 2260 mm Machine Weight: 5,800 kg 🧰 Included with the Machine: Selection of Driven Tool Holders Selection of Manual Tool Holders 2x Chucks Swarf Conveyor Note: Tools shown in photos are not included – only the holders are provided. 🛠 Suitable For: Precision turning, mill-turn applications, production of complex components in aerospace, medical, automotive, and general engineering sectors. Used CNC Lathe Ireland, Goodway GS-260MYS for Sale, CNC Lathe with Y Axis and Sub Spindle, Live Tool CNC Turning Centre, CNC Turning Machine Europe, Fanuc CNC Lathe for Sale, Multi-Axis Lathe Machine Used Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm Dcjdpfx Aewtr Iyea Hel At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Dcedpfx Aoy St Sdea Hel Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company Dodpfxew Nygns Aa Hecl 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, coil weight: 2,000 kg, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, spreading range: 900 mm, Dimeco Coil Pick & Tilt Coil Handler Machine Type: Coil Pick & Tilt Handler Model: Coil Pick & Tilt 20 1500 250 Year: 2023 Hours: 10hrs Condition: Excellent Description Electric Powered Truck Specifically Designed For Coil Handling – No manual operation. Dcjdpfx Aaeu Nx Nzs Hsl – Coil tilting is fully controlled safety is improved. – Truck is able to pick up coil from a standard wooden pallet. Technical Specifications Max Coil Weight: 2000kg External Ø (Max): 1500mm External Ø (Min): 600mm Width: 250mm Internal Ø: 508mm Max Height of Forks: 1300mm Forks Thickness: 40mm Distance Between Forks(Open): 1610mm Distance Between Forks(Closed): 610mm Truck Weight: 1365kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 22735, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,000 rpm, rotational speed (min.): 600 rpm, height adjustment type: mechanical, Equipment: rotational speed infinitely variable, type plate available, ✨ 2017 Ciclope ZOE-L High-Speed Belt Polishing Machine – Very Good Condition Boost your metal surface finishing with this 2017 Ciclope ZOE-L High-Speed Belt Polishing Machine, now available in very good condition. Ideal for metalworking, fabrication, and polishing applications, this Italian-built machine delivers reliable high-speed performance, precision, and ease of use. The ZOE-L model is engineered for fast and efficient surface preparation of flat and tubular components, including stainless steel, aluminium, and other non-ferrous metals. ✅ Key Features – Ciclope ZOE-L (2017) Year of Manufacture: 2017 Condition: Very Good – fully functional Polishing Type: High-speed belt polishing (abrasive belt system) Workpiece Compatibility: Flat bars, tubes, and sheet metal Belt Speed: Adjustable high-speed performance Belt Width: 15 mm Belt Length: 610 mm Belt Speed: 600 - 3000 RPM Motor Power: 0.55 kW/0.75 HP Control Panel: Intuitive operator controls with safety stop Dust Extraction Port: Integrated for cleaner operation 🧰 Machine Capabilities Deburring and polishing of flat and curved metal surfaces Surface finishing on stainless steel and aluminium parts Ideal for preparing weld seams and smoothing edges Dedswwivvepfx Aa Hecl Suitable for architectural, industrial, and decorative applications Rapid belt change system for increased productivity 📦 Included With Machine Ciclope ZOE-L polishing machine unit Safety guards and original electrical controls Integrated dust extraction connection 🏭 Ideal For: Stainless steel and aluminium fabricators Sheet metal processing and deburring Weld seam polishing in industrial production Architectural metal finishing Custom fabrication and surface prep workshops 🚚 Availability & Delivery This machine is in stock and ready for immediate inspection and delivery. We offer shipping across Ireland, UK and Europe. 📞 Enquire Today Looking for a high-performance belt polishing machine in excellent working order? Don’t miss this opportunity to own a Ciclope ZOE-L, trusted across Europe for its performance and durability. Ciclope ZOE-L polishing machine for sale Used high-speed belt polishing machine Industrial metal polishing equipment Deburring and polishing machine for stainless steel Belt sander for flat bar and tube finishing Surface finishing machine for aluminium and metal parts Ciclope finishing machine in very good condition Metal polishing equipment UK / Ireland / Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Dcjdpswqrvlofx Aa Hjl Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,800 mm, total length: 2,250 mm, total width: 1,400 mm, feed rate X-axis: 25 m/min, grinding wheel diameter: 205 mm, table length: 500 mm, type of input current: three-phase, table width: 250 mm, grinding wheel width: 19 mm, spindle speed (max.): 2,900 rpm, overall weight: 1,350 kg, grinding spindle motor power: 1,500 W, rotational speed (max.): 2,900 rpm, grinding spindle speed: 2,900 rpm, power: 1.5 kW (2.04 HP), grinding wheel speed: 2,900 rpm, input voltage: 400 V, disc diameter: 205 mm, Metallkraft FSM 2550 Surface Grinder Machine Type: Surface Grinder with NC Controlled Vertical Feed Year: 2018 Control: NC Control Condition: Very Good Includes NC Controlled Vertical Feed Table Enclosure Guard Electro-Magnetic Chuck Dedpov Iq Shofx Aa Hjcl Wheel Dresser Coolant Equipment Halogen Light DRO Auto-Lube Technical Specifications Grinding Wheel Diameter: 180 to 205mm Grinding Wheel Width: 19 to 13mm Grinding Wheel Bore: 31.75mm Spindle Speed: 2900rpm Table Dimensions: 500 x 250mm X Axis Travel Speed: 5-25m/min Drive Motor Power: 1.5kW Electrical Connection: 400V/3Phase/50Hz Machine Dimensions: 2250x1400x1800mm Machine Weight: 1350kg Notes: *Specifications are given in good faith but not guaranteed*