Sparkling wine corker / Wirehood machine

KEMATEC KORMA S1 / AGRAFFA 1

Condition: used, Year of construction: 2013, KEG filler, make Framax, type: F-2-Ecodraft, 2 filling stations, made of stainless steel, Hodpforxuh Sox Akiow control cabinet with touch panel, built on base frame, built in 2013; overall dimensions L: 850 mm x W: 1100 mm x H: 2000 mm

Condition: reconditioned (used), Year of construction: 1998, KEG system, manufacturer: GEA Till, type: KEG-BOY C2, for approx. 25 KEGs/hour, for KEGs with flat fitting, with 1 internal cleaning station and 1 filling station, with 1 cleaning agent tank, with control cabinet. The system is overhauled and equipped with a new control unit. Hsdpfx Aew Hxuyekisw

Condition: used, Year of construction: 2011, Glass bottle filling-line for 0.33 l longneck, 0.5 l Euro, crown caps, and 0.5 l, 0.75 l swing top bottles consisting of: - Bottle filler and crown cap sealer with long tube filling valves Manufacturer: Markl Year of manufacture: 2011 - Swing top sealer Manufacturer: Rico - Labeling machine Manufacturer: Krones / KOSME Year of manufacture: 2011 - Laser printer for dating Manufacturer: Domino - Bottle collecting table Additional title: Filling line (long-tube filler, various bottle formats, various cappers) Hedpfx Aezu Rw Tekiew Capacity: 3000 bottles/h Formats: 0.33 litre longneck, 0.5 litre Euro, crown cap, and 0.5 l, 0.75 l swing top bottles Features: Markl bottle filler and crown capper with long tube filling valves and swing top capper; Krones/KOSME labelling machine; Domino laser printer for dating; bottle collection table

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Hjdjxwy H Aepfx Akisw Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour Hedpsz D Uuxefx Akisw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Complete overhaul in April 2026 Hsdsz Nlcxopfx Akiew In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included The machine comes with a comprehensive package of extra parts, including: - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Condition: used, Year of construction: 2005, Machine: Kematec Korma 1 / Agraffa 1 Cork for sparkling wine / Wirehooder Hodsz R Dgropfx Akiew

Condition: used, Year of construction: 1998, machine/vehicle number: M310, Technical Specifications & Performance Data This Rinsing-Filling-Capping Triblock by FIMER is a robust rotary monoblock engineered for glass bottle handling and precision filling. Built on the model SRT 24-24-6, it integrates a 24-clamp rinser with mobile nozzle, a 24-valve gravity/light depression filler, and a 6-head aluminum screw capper. Designed for reliable operation in beverage production and industrial packaging, it is suitable for second hand and used bottling line upgrades where consistent performance and compact footprint are priorities. Manufacturer: FIMER Model: SRT 24-24-6 Year: 1998 Rinser: 24 grippers, mobile nozzle Filler: 24 valves, gravity/light depression (slight vacuum) Capper: 6 heads, aluminum screw caps 31,5 x 18 Cap handling: Complete with cap elevator Electrical power: 6.5 kW Power supply: 380 V, 50 Hz Compressed air: Max 6 bar Hjdpfo Ady Ecox Akijw Construction: Rotary triblock for glass bottles Advanced Automation & Control Systems The triblock integrates coordinated rotary turrets for synchronized rinsing, filling, and capping. It is designed for straightforward operation with clear machine status visibility and quick access to critical areas for adjustments. The filler operates on gravity/light depression principles for stable liquid level control, ideal for products like vinegar in glass bottles. Electrical configuration: 380 V, 50 Hz Installed power: 6.5 kW Filling technology: Gravity/light depression for accurate, low-turbulence filling Safety systems: CE-marked with protective guarding and emergency stop circuits Changeover: Format changes supported via standard change parts Production Line Integration Capabilities This unit can be integrated into a complete used bottling line or operate as a standalone monoblock in glass bottling applications. It interfaces easily with upstream bottle conveyors and downstream inspection, labeling, and packaging machinery in beverage production and industrial packaging environments. Operation mode: Inline integration or standalone Container handling: Designed for glass bottles Cap logistics: Integrated cap elevator for continuous feeding Applications: Suitable for vinegar and similar still products Machine Condition & Maintenance History The triblock comes from a professional bottling context and is presented as a second hand solution in working condition, ready for operation. The configuration and components indicate routine industrial use with standard maintenance practices typical of glass bottling environments. Status: Ready for operation Usage: Previously used to fill vinegar into glass bottles Operational Performance & Versatility With 24 rinsing grippers and 24 filling valves, the machine provides balanced throughput, while the 6-head capper ensures consistent aluminum screw cap applicat...